|
RE: EDF F-22 search
Fly Fly hobby do a large F-22 but i dont think that is Rceiver ready
Posted on: 10/26/2009 3:46 PM by Author "Willit Run 353"
in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9203599
RE: Parkzone Habu
I think it is good that Parkzone are going down the EDF route but I hope they develop some more like a A-4 and an A-10 or MiG 15.
Posted on: 10/26/2009 3:44 PM by Author "Willit Run 353"
in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9203592
RE: EDF reversing for air brakes
you could use an RC cars ESC as that has reverse built in. I think you should go for 8 fans. I know some people say otherwize but whats a B-52 with out 8 engines?
Posted on: 10/26/2009 3:41 PM by Author "Willit Run 353"
in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9203588
RE: edf jet
Nothing will beat the Phase 3 F-16. It was my first EDF and is one of the best. I just thought you might like to consider that becasue if yoy do get one you wont be sorry!!
Posted on: 10/26/2009 3:38 PM by Author "Willit Run 353"
in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9203580
RE: Off the wall EDF idea
you would just end up loosing thrust. If you used one and made the air exit smaller the exit speed would be faster and therefore the model would be faster.
Posted on: 9/9/2009 4:11 PM by Author "Willit Run 353"
in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9082004
RE: SHOW OFF YOUR PLANE's PICTUREs/VIDEOS
[b]Dont laugh, I know its not quite as streamline as all or your jets but here is my EDF Fox (well it counts) Power is from a 40mm GWS fan and a 3S 450mAh LiPo. It can just about keep up with a Phase 3 F-16 on 75% throttle I have also a V-1 doodle bug, It is designed around john ransons plans from traplet and has only flow 300m so far I have also thrown in a picture of my Phase 3 F-16[/b]
Posted on: 9/9/2009 4:08 PM by Author "Willit Run 353"
in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9081997
RE: RC Flight Simulator Comparison Chart...
phoenix now has 115 aircraft
Posted on: 8/29/2009 11:44 AM by Author "Willit Run 353"
in the forum "RC Flight Simulator Software"
http://www.rcuniverse.com/forum/fb.asp?m=9054206
RE: Wiring
If you are using futaba then check that #3 channel is reversed or when you connect the wires the throttle will start if you have the stick all the way back. I am guessing that the red wire goes to read so does the black and the blue goes to the yellow. if it spins in reverse then swap the red to the black.
Posted on: 8/13/2009 3:54 AM by Author "Willit Run 353"
in the forum "Electric General Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=9012651
RE: Phase 3 F-16 complete!!!
thats really nice! you should enjoy flying that whats that blue round the back of the tail pipe?
Posted on: 8/13/2009 3:46 AM by Author "Willit Run 353"
in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9012642
RE: Art-tech F-18 hand launch?
Lander make some retracts that are pretty small, they might work for this aircraft but if not there are some smaller retracts about. I say go for the retracts, it will look so much better!
Posted on: 8/13/2009 3:43 AM by Author "Willit Run 353"
in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9012639
RE: Precision Aerobatics Extra 260 with dualsky X-motor
yeah my X motor has been working really well but next time ill get the trust motor
Posted on: 8/10/2009 7:31 AM by Author "Willit Run 353"
in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=9004198
RE: PZ Corsair servo stripped?
replace it. there is no point using uselss servos! Get some nice sevos while your at it and replace them all. its best to be safe and it should fly really nicely
Posted on: 8/10/2009 7:28 AM by Author "Willit Run 353"
in the forum "Foamies! - RC Electric Foam Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=9004197
RE: Yellow Aircraft F-16 and BVM EDF?
yes it will fly but you will be a slave to the charger with those big LiPos
Posted on: 8/7/2009 4:44 PM by Author "Willit Run 353"
in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8998093
RE: Phase 3 EF - 16
has anyone tied thrust vectoring on this plane. it looks fun and im sure that ducting at the end would be good enough. I could try it on my old one which is in many peices
Posted on: 8/1/2009 10:47 AM by Author "Willit Run 353"
in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8981206
RE: FlyFly BAe Hawk 90mm EDF
I hear these kits are quite bad on the quality side. but I am looking for a large EDF (around this size) is there any other planes i should look at
Posted on: 7/28/2009 1:58 PM by Author "Willit Run 353"
in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8970965
RE: noob question? need help!!!
it may also be that you switched off your TX before your RX, I hear cheap TXs and RXs can almost die (or settings lost) from this
Posted on: 7/28/2009 1:47 PM by Author "Willit Run 353"
in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8970940
RE: EDF Jetliner Large scale??
I think this is what you mean: http://www.foamyjets.co.uk/index.php?act=viewProd&productId=530
Posted on: 7/28/2009 1:45 PM by Author "Willit Run 353"
in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8970935
RE: 63
this guy designed and built a 63" spit. http://www.tonynijhuisdesigns.co.uk/Spitfire62.htm from this page there is a link to a PDF with some info on it and a motor recomendation
Posted on: 7/28/2009 1:43 PM by Author "Willit Run 353"
in the forum "Glow to Electric Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=8970927
RE: Questions about electric setup on Hangar 9 Spitfire 60
the reason there will not be any advice in the manual is becasue its made of an IC engine. AXI motors make radial motor mounts here: http://www.modelmotors.cz/index.php?page=103 they're intended for axi motors so I dont know whether an e flite motor will work with these.
Posted on: 7/28/2009 1:39 PM by Author "Willit Run 353"
in the forum "Glow to Electric Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=8970916
RE: Banana hobbie's new f18
is this 1:8th scale and does it have retracts? It looks very nice and is worthy of being one of my TX model memories
Posted on: 7/24/2009 3:10 PM by Author "Willit Run 353"
in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8960724
RE: 58in A-10 EDF Conversion
where can you get a good sized (50"-65") A-10 tank buster? (possibly with retracts) thanks, willit
Posted on: 7/19/2009 2:51 PM by Author "Willit Run 353"
in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8946384
RE: repair for my corasir
take it to your local hobby shop
Posted on: 7/19/2009 8:00 AM by Author "Willit Run 353"
in the forum "Foamies! - RC Electric Foam Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=8945602
RE: WHATS THE DIFFERENCE???
yes Z foam is alot stronger and should give you many flights before you rip the scoop off
Posted on: 7/19/2009 7:57 AM by Author "Willit Run 353"
in the forum "Electric General Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=8945599
RE: SR71
he's cheating by ony using one turbine anyway its still a good model! when I say the title saying SR-71 I thought it would be a small foamy but i was wrong!
Posted on: 7/15/2009 4:21 PM by Author "Willit Run 353"
in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8936086
RE: Kyosho Illusion DF
this is a nice plane. has anyone ever mannaged to get the motor ot of the fan?
Posted on: 7/15/2009 4:16 PM by Author "Willit Run 353"
in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8936074
RE: Phoenix UK Simulator with Aircraft
this simulator is fantastic!!! the new version 2.5 has mad this sim the best on the market. I have done some F-16 colour schemes for download but cannot up load the zip files so they are here: http://www.rcgroups.com/forums/showthread.php?t=1045667&page=2 (scroll down a bit)
Posted on: 7/15/2009 5:02 AM by Author "Willit Run 353"
in the forum "RC Flight Simulator Software"
http://www.rcuniverse.com/forum/fb.asp?m=8934828
RE: Best mini airplane
you cannot beat the Kyosho/Parkzone minium series.
Posted on: 7/15/2009 2:41 AM by Author "Willit Run 353"
in the forum "Electric General Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=8934737
RE: CESSNA 182 ART TECH
well you are right. my mustang has got a bit boring, all I do now is fly inverted and fly really high so i can glide down. it needs more power! that means I need a new foamy but I don't know what to get. the Parkzone corsair looks nice
Posted on: 7/15/2009 2:35 AM by Author "Willit Run 353"
in the forum "Foamies! - RC Electric Foam Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=8934733
RE: Newbie - What Foamies are out there?
well for scale I would go for art tech or better still parkzone warbirds but for jets, the only airliner I know (that is any good) is the eflite airliner (you need a big space though)
Posted on: 7/14/2009 2:08 PM by Author "Willit Run 353"
in the forum "Foamies! - RC Electric Foam Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=8932724
RE: EDF MPX FOX
well flying so far has gone well. I have had about 20 flights and the only problem is cooling. I just cant get enough air in to the cockpit.
Posted on: 7/14/2009 2:04 PM by Author "Willit Run 353"
in the forum "Foamies! - RC Electric Foam Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=8932715
|