RE: Does anyone know what this is?
It's a Heli-Max mx400 clone , except the tail boom on the picture it have align 450 tail boom. Heli max discontinue this but another company from Taiwan I believe they still produce this heli.
Posted on: 7/9/2012 11:40 AM by Author "Ybenjulkay2x" in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=11148907

RE: Tail happy Trex 500!
I'll replace the torque tube also if I were you.
Posted on: 7/9/2012 11:33 AM by Author "Ybenjulkay2x" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=11148901

RE: TX/RX not binding believe ESC is bad....
[quote]ORIGINAL: skindeep No dice still no response from anything other than the ESC startup beep sequence a little fluttering of some servos, the gyro light flashing multiple times then going to an flash every second or so along with single beeps coming from the esc in about the same time frame. I went ahead and payed him for looking at it for me and headed home. After reading numerous more posts on everything to do with the Gyro, ESC, and RX/TX I still have not made any progress and the ESC is supplying 5V steady out of the BEC connector on pin 1 and pin 3 so that is what I have so far.... [/quote] is your throttle curve is 0% on power up mode, it look like when you connect your battery your esc is aking for programming, most of the esc when you connect your battery, if your stick is on mid, esc is asking for programming input. Check your radio setting throttle curve, throttle stick all the way down, 0% throttle curve. Can any one explain it more..
Posted on: 7/4/2012 11:35 PM by Author "Ybenjulkay2x" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=11143474

RE: TX/RX not binding believe ESC is bad....
is your throttle curve is 0% on power up mode, it look like when you connect your battery your esc is aking for programming, most of the esc when you connect your battery, if your stick is on mid, esc is asking for programming input. Check your radio setting throttle curve, throttle stick all the way down, 0% throttle curve. Can any one explain it more..
Posted on: 7/4/2012 11:25 PM by Author "Ybenjulkay2x" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=11143468

RE: nitro engine wont start
Does fuel reach the carb when pressurizing the tank?
Posted on: 7/4/2012 5:13 PM by Author "Ybenjulkay2x" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11143204

RE: anyone using anything besides starter box
I believe roto start not gonna work on MTX mugen, the exhaust manifold is on it's way, I have MTX3 , MRX3, savage-25 and both lst 1 and 2.
Posted on: 4/28/2012 11:54 PM by Author "Ybenjulkay2x" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11060836

RE: Looking for a used blade 450X!!!
just go to deal extreame .com, blade is cheap shipping is free.
Posted on: 4/8/2012 2:03 PM by Author "Ybenjulkay2x" in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=11033394

RE: How long do 11.1volt batteries accually last?
It depend on your flying style, for 3D some they fly for 5min, for sport flying some at least 8 min . The important is don't use your battery beyond 80%.
Posted on: 4/8/2012 2:02 PM by Author "Ybenjulkay2x" in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=11033393

RE: Best hobby shop in San Franciso
There's one in fremont, popular hobby shop for helis named Victor's Hobby.
Posted on: 3/30/2012 9:25 AM by Author "Ybenjulkay2x" in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=11021153

RE: 450 shaft straightening tool (truing tool)
Or just get some spare shaft (3 per pack for $2.50) and tail shaft (2 per pack for $1.32) check HK, its not that expensive, truing tools it does for me[:D]
Posted on: 3/26/2012 9:35 PM by Author "Ybenjulkay2x" in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=11016509

RE: How do you charger batteries in Blade 450?
I have the same charger that you have. make sure your power lead to lipo is not on reverse, the charger comes with it lead that you can plug in to the charger to the lipo, make sure is red to red, black to black, pos to pos neg to neg. when I recieved my accucell-6 it comes with lipo lead, glow plug charger lead, aligator clip lead. plug in your lipo balace port to the charger. to operate the charger you may used laptop power supply. Press the status until you see lipo charge, press status right arrow until you see balance charge, press start, it will show confirming batt press start to confirm. It will take at least an hr to charge 3 cell.
Posted on: 3/26/2012 9:27 PM by Author "Ybenjulkay2x" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=11016501

RE: HK 600 question
check out HK hobby, they have some descent lipo batt. I may consider going to 5000 mah instead of 3500mah. I have also the hk600 and I used 2 3000mah 6s for forward flite (5 min each flite) 2 batt. just to balance its center gravity. also I used 2200mah 3s to power the HK esc opto 80 amp + regulator to power the reciever.
Posted on: 3/26/2012 9:13 PM by Author "Ybenjulkay2x" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=11016489

RE: What gyros is out there?
try the assan 250 at HK. it might work. better then the hk401b
Posted on: 1/18/2012 6:07 PM by Author "Ybenjulkay2x" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=10916026

RE: Getting Dynamite mach .26 to fit.
I believe you need to use an engine mount for pull start type engine. I have a hyper 7 with mach .26 w/o any problem. The engine mount I have is for pull start type (it comes in the box when I bought it.)
Posted on: 9/28/2011 9:19 PM by Author "Ybenjulkay2x" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=10739700

RE: I wanna Know how many rc vehicles you have? Come look at my list when I went on a rc bender!
BMT (931) been stolen in my car serpent impact (M2) been stolen in my car ofna OB 4 ofna colt 1/10 total wreck Mugen (mtx3 1/10) mugen (mrx3 1/8 ) LST LST2 MGT .26 savage -25 (got 2 one for and one for my dauther) ofna hyper 7 w/ .26 radio M8 and JR XS3 from LST and LST2 Now I'm on heli 450 clone HK 500 clone Flasher 600hk radio airtronix
Posted on: 8/30/2011 7:18 PM by Author "Ybenjulkay2x" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10694268

RE: need main gear TREX 450 X 150T/109Auto
I just replace mine from HK and work fine, part # HK450V2 Main Gear Set. it comes with cnc main bearing too.
Posted on: 8/5/2011 5:03 PM by Author "Ybenjulkay2x" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=10657314

RE: Need Help IDing this Buggy
It look likes it's a Thunder tiger, just don't remember if its called Mirage V spec build on the mid 90th, older than my daugther and have one before. Check American Hobby center in NY if they still carry or at lest try Nitro House.com
Posted on: 7/15/2011 8:24 PM by Author "Ybenjulkay2x" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=10623265

RE: Warhead: First Impressions
There's a lot of negative side of the warhead by duratrack, you may check the warhead trends. check the trends forum for warheads.http://www.rcuniverse.com/forum/m_3643360/tm.htm
Posted on: 7/5/2011 10:50 PM by Author "Ybenjulkay2x" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10608030

RE: E-Flite Blade or Align T-Rex?
you may check also hobbycity.com, like the assan 250 gyro, better than the hk401b.
Posted on: 7/5/2011 10:35 PM by Author "Ybenjulkay2x" in the forum "Electric RC Helis"
http://www.rcuniverse.com/forum/fb.asp?m=10608019

RE: Making your own heli fuel?
you can use castor oil for oil mixture and you can get it at any pharmasist (not the castrol oil from automotives store), the rest Methanol. I've try those long long time ago just for bashing around, it work with out the nitros just for bashing around.
Posted on: 4/25/2011 10:47 PM by Author "Ybenjulkay2x" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10485353

RE: Trex 600 cyclic fine tuning problem? Or not advice
I have a question, does direct drive (linkage) from servo arm to swash plate will work? I'm doing experiment on my 600 GT as i notice it reduce speed on my cyclic when I have the other part linkage on, after removing the linkage and do it direct from servo to swash, it add more speed on my cyclic ( it's very slooow on cyclic before so I decide to do like the 500 GT setting).
Posted on: 4/25/2011 10:35 PM by Author "Ybenjulkay2x" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=10485345

RE: How do you spool up your 600
Or unbalance blade, or tracking could be out.
Posted on: 3/10/2011 9:05 PM by Author "Ybenjulkay2x" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=10392457

RE: HK 600gt? Yes or No...
I don't have any problem with their esc, even the brand mystery, just make sure if you accidentaly crash, cut the power off of your motor like doing auto so it won't burn your esc nor puff the battery as motor will continue running after crash, as it happen to me before when i was new to heli using walkera radio no motor cut off. Also make sure you get the 6mm pinion too. as the hk 600 heli comes with 5mm pinion. I can used that 5mm on my 500. Cutting the frame, you can check GOGGLE how they cut the frame align trex 600, I even copy and save it so I have an idea how will i cut it using dremmel tools. some guys use scorpion motor almost the same as the hk motor (http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=11102) and they do cut the frame.
Posted on: 2/26/2011 2:23 PM by Author "Ybenjulkay2x" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10365651

RE: HK 600gt? Yes or No...
[quote]ORIGINAL: Vanka472 Nice I'm thinking this motor... http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=11102 [/quote] You might need to cut the frame to make this motor fit, lot of people said. I'm waiting for mine before cutting the frame.
Posted on: 2/26/2011 12:58 PM by Author "Ybenjulkay2x" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10365489

RE: tail issues with blueray 450
I have that problem before but after I seen one of the treands here regarding throttle mix to rudder, I did some setting and test and it work.
Posted on: 2/24/2011 2:30 PM by Author "Ybenjulkay2x" in the forum "Electric RC Helis"
http://www.rcuniverse.com/forum/fb.asp?m=10361085

RE: My HK 600 reviews
Me, I'm just also waiting for the esc, motor, servos from hk, blades from deal extreame (free shipping). I can't wait to get all of parts, the parts been hold due to chinese new year. I wish it will be ship soonnnnnnnnnnnn. Also parts for my 500 also is together with the order. Can't wait.
Posted on: 2/19/2011 3:39 PM by Author "Ybenjulkay2x" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=10348541

RE: heli problem
give us the full info about that heli, is that a fp or cp or maybe coaxial.
Posted on: 2/14/2011 9:56 PM by Author "Ybenjulkay2x" in the forum "Electric RC Helis"
http://www.rcuniverse.com/forum/fb.asp?m=10337000

RE: Erratic T-Rex 600 motor
[quote]ORIGINAL: gauicanada I heard that static can cause all sorts of control problems and if it's belt drive a lot of static can be produced. What I was told was to lube the belt with silicon lube and then try, so I soaked it. Went and flew today and found my glitches and speed bursts from yesterday did not occur I went through five battery packs without and issue. Now it's too soon to say it's cured but only time and patience will tell and hopefully this and other control problems will be gone. [/quote] You may try to ground your tail to the motor (motor mount).
Posted on: 2/13/2011 8:57 PM by Author "Ybenjulkay2x" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=10334434

RE: Do you get more oomph out of your batteries when...
Just make sure not draining the lipo more than 80% if you do the batt will caught on fire, i fly heli with lipo.
Posted on: 2/9/2011 9:01 AM by Author "Ybenjulkay2x" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10323294

RE: Helicopter RC - Race Event
I've seen one (YOU TUBE) obstacle race before held in China but most are big size heli like 600 and 700 gas and electric. Lots of them crash. Check it in You tube, RC heli crash.
Posted on: 2/5/2011 10:23 AM by Author "Ybenjulkay2x" in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10314466