RE: Retract servo
Thanks!!! I'll drill mine.... Allen
Posted on: 10/24/2009 3:10 PM by Author "a68fan" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=9198712

Retract servo
Good day.... I have an older Hanger 9 Texan. ( Blue & Yellow ) I am missing the connectors connecting the retract operating rods to the servo output wheel. Does anyone have a source for these?? I can drill out smaller connectors, but I do not think they will be strong enough. Thanks!!! Allen Crowe
Posted on: 10/24/2009 9:15 AM by Author "a68fan" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=9198083

RE: expo
Thanks guys!!! Just what I needed to know....... Allen
Posted on: 2/24/2009 11:17 AM by Author "a68fan" in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=8512793

expo
I have a fairly new JR 7202 radio. My question is on expo. Does positive (+) make the controls "softer" or does minus (-)? I want to lessen control throws at the begining of stick movement. I hope this makes sense. Allen
Posted on: 2/23/2009 4:39 PM by Author "a68fan" in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=8509873

RE: Re- Newb
Thanks!!!! That's what I figured, That was "the one" when I played with these things a couple years ago. Allen
Posted on: 2/19/2009 12:08 PM by Author "a68fan" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=8494715

Re- Newb
I've been out of helis for about 2 years now, and have a 450 SA. I need advice for a gyro, and probly a tail servo. I'm sure technology has changed, and electronics are better. I plan to do NO 3D. Thanks!!! Allen
Posted on: 2/19/2009 11:43 AM by Author "a68fan" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=8494626

RE: Need Help Balancing a Rotor...
I use clear fingernail polish. you can "dob" it on kinda' heavy, and will dry fairly quick. ( I dob it on the "12 o'clock" side of the hub at fin root. Allen
Posted on: 12/3/2008 4:36 PM by Author "a68fan" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8209450

RE: Low visibility
Thanks Mike!!!! That's perfect!!!! Allen
Posted on: 9/18/2008 7:27 AM by Author "a68fan" in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=7966131

Low visibility
Good day.. I figure this subject has been covered to death, but I'm going to take a chance... I'm looking for "low visibility" U.S. Air Force roundals. I can print on clear ink jet material, just looking for the roundals. They are going on a Phase III EF-16. Of course I'd like to get 'em free, but I am willing to pay. Thanks!!!! Allen
Posted on: 9/16/2008 10:58 AM by Author "a68fan" in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=7959607

RE: E-Flite F-15 Eagle
Hi all!! Finishing up my plane and have a question: Refering to Post 29, am I understanding to wire batteries parallel in to one plug, and wire ESC's in to one plug?? Thanks!!!1 Allen
Posted on: 9/8/2008 10:56 AM by Author "a68fan" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7932605

RE: Cockpit Treatment?
I like to "upholster" my cockpits w/ felt. Wallyworld or any craft shop should have several colors to accent any color scheme.. Then add pilot. I do not care for "trolls" or other stuff like that for pilots either... I believe the felt comes in 1Sq. FT. sheets. Allen
Posted on: 4/24/2008 9:36 AM by Author "a68fan" in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=7413297

RE: Sealing Hinge lines
Thank you very much!! Sky Raider will go "under the knife" This evening.... Allen
Posted on: 2/27/2008 3:47 PM by Author "a68fan" in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=7146112

RE: Sealing Hinge lines
Hi Guys!! This question is not about "flutter", but kinda' fits in.... I have a Sky Shark Sky Raider with a llittle tal wag at 3/4 plus throttle. No no waggle at lower throttle. It does have "Nyrod" for rudder control... Any ideas?? Allen
Posted on: 2/26/2008 3:18 PM by Author "a68fan" in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=7140776

RE: Who, Where, How Are You?
Allen Hickory, NC All types of RC... Planes, helis, cars, trucks, boats.. Current fleet, Helis CP CP Pro CX Trex SA Falcon 3D HDX 300 I like these things!!! Although, I can barely hover tail in.....
Posted on: 11/28/2007 9:59 AM by Author "a68fan" in the forum "E-Flite Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=6685266

RE: Stock car wheels- NTC3
Thanks!!!!!
Posted on: 11/15/2007 8:23 AM by Author "a68fan" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=6627918

Stock car wheels- NTC3
We used to get stock car type wheels to fit the NTC3... Will HPI wheels fit Associated?? Any suggestions??? Thanks!!! Allen
Posted on: 11/13/2007 9:20 AM by Author "a68fan" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=6618491

RE: JR 410 Gyro
A big rousing thank you to all who offered suggestions!! Turned out to be a combination of servo/gyro reversing, and a loose belt. I am proud to say my model is finally airborne!!! Only a hover, but airborne!!! allen
Posted on: 9/14/2007 4:27 PM by Author "a68fan" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=6368149

RE: JR 410 Gyro
Thanks!!! I tried an Align gyro I had for another project, did the same thing... I'm now leaning toward tail drive belt issues... Allen
Posted on: 9/11/2007 4:24 PM by Author "a68fan" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=6355383

JR 410 Gyro
Hey guys... I have a JR 410 Gyro w/ the JR 3400? Digital tail servo on my 450 SA. (JR7202 Transmitter) Model spins "out of control" when I add throttle. I did assembly and set up by the book. As near as I can tell, all connections are corrrect, transmitter/ gyro settings correct. Any ideas?? Thanks!!!! Allen
Posted on: 9/10/2007 4:34 PM by Author "a68fan" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=6350788

RE: World Models Ultimate 40S
So much material!! Can someone give me a link to "Changing the ailerons"?? I have not been able to find it... Thanks!!! Allen
Posted on: 9/5/2007 4:02 PM by Author "a68fan" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=6331510

RE: World Models Ultimate 40S
Wonderful!!! Thanks guys for all the info.. I'll try the search... Allen
Posted on: 9/5/2007 9:13 AM by Author "a68fan" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=6330259

RE: World Models Ultimate 40S
Thanks!!! That's really no problem.. I'm an "arfer", so those little things are kinda' expected.... Allen
Posted on: 9/4/2007 12:51 PM by Author "a68fan" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=6326363

World Models Ultimate 40S
I'm lookin' at a World Models Ultimate 40 size. (Ultimate 40S) Of course, magazine review is favorable, from the web site model looks good. Any feedback or experience?? Allen
Posted on: 9/4/2007 10:33 AM by Author "a68fan" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=6325904

RE: Autographic "decals"
Thanks for the Ebay tip!! That's too bad... Autographics has(d) a great product.... Allen
Posted on: 8/28/2007 4:14 PM by Author "a68fan" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=6299093

Autographic "decals"
Anyone know what happened to the company known as "Autographics"???? They made killer stock car graphics.. Allen
Posted on: 8/27/2007 1:13 PM by Author "a68fan" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=6293397

RE: Stadium Truck Gallery v.2
Here's mine... HMMM... Pics not showing up?? There it is.
Posted on: 8/24/2007 10:49 AM by Author "a68fan" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=6280698

RE: Jato guys. Need your opinion!
I recently changed color of some Proline wheels. I used spray oven cleaner to remove the chrome. Wheels appear to be a styrene plastic similar to what plastic models are made of. I used Underhood black paint from Eastwood Products, preceeded by a treatment of a spray that promotes adhesion of paint to plastic. Do not use enamal, it is not fuel proof, and doesn't stick very well.. Pics do not show wheels very well.. You get the idea...... Allen
Posted on: 8/8/2007 12:56 PM by Author "a68fan" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=6212150

RE: Global Skyraider
Mine is a kit.... Builder had it for a few years..... Thanks guys for your help!! She's a sweet flyer.... Allen
Posted on: 7/17/2007 8:28 AM by Author "a68fan" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=6121328

Global Skyraider
Good day... Aquired a Global Skyraider this weekend. Model flies great, except for a tail wag @ full throttle. Any Ideas??? Also, I need a canopy. I understand Global is no longer in business, or at least no longer makes this model. Whata' ya' think??? Thanks!!!!! Allen
Posted on: 7/16/2007 12:41 PM by Author "a68fan" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=6117586

RE: jato as a racing truck!!!!!!!!!!
Thanks KRO.. That's just what i need!!!!! Allen
Posted on: 1/23/2007 1:56 PM by Author "a68fan" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=5311006