RE: gas fuel with glo plug no ignition
Great!!! congratulations keep posting your results!!!
Posted on: 4/22/2012 5:20 PM by Author "aero nut" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=11052721

RE: GAS/GLOW HOW TO....
Thank you computermonkey!!!
Posted on: 4/22/2012 5:18 PM by Author "aero nut" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=11052720

RE: GAS/GLOW HOW TO....
Hi guys long time no see!!! Hey Bob how are you doing, hope everything is well, I need your help, I am trying to contact FRANK BOWMAN to see if he can make me some rings for a DL 100CC engine, do you or anybody else knows how to contact him? I would really appreciate your help on this one. Happy Flying and Happy LANDINGS to all. AERO NUT
Posted on: 4/18/2012 9:51 PM by Author "aero nut" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=11048083

RE: Garolite G-10 substitute??
Hi Robert!!! I have heard of people using PLYWOOD then coated with epoxy. Are you still living in Peñasco??? Regards
Posted on: 7/19/2011 11:17 AM by Author "aero nut" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=10628832

RE: gas fuel with glo plug no ignition
I want to thank evrybody that made this thread what it is "THE DADDY OF GAS/GLOW FUEL" Aero Nut
Posted on: 4/16/2011 11:13 PM by Author "aero nut" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=10467260

RE: gas fuel with glo plug no ignition
Well guys I just thought that I would jump start the father of gas/glow thread, it has been a lot fun and experiences developed throughout the years. I would like to thank allof the contributors to this revolution that I started many years ago and that is still going on but now on a newer thread that my good old frien av8tor initiated. so KUDOS to all of you GAS/GLOWERS. Sincerelly: AERO NUT
Posted on: 4/16/2011 2:04 AM by Author "aero nut" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=10465680

RE: GAS/GLOW HOW TO....
And boy, how did we experimented!!!!!
Posted on: 4/12/2011 11:47 PM by Author "aero nut" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=10459763

RE: McCulloch 32cc prop
I've always liked the APC 18X6W they have proved to give the Max RPM's in both the Ryobi and Mc's
Posted on: 3/27/2011 9:24 PM by Author "aero nut" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=10427222

RE: SUPERTIGRE 3000 SPECIAL TUNED CONVERSION
Thanks Bob! as for your question my club does and does not have a web page as is not official butr some one in our club did it. http://aeromodelismodetijuana.tripod.com/ like I said it is not our official web page
Posted on: 3/21/2011 4:47 PM by Author "aero nut" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=10414511

RE: SUPERTIGRE 3000 SPECIAL TUNED CONVERSION
Just hanging in bro!! just got out of the hospital I caught Pneumonia/bronchities and was very illed, but I managed through now I need to recover abit little by little
Posted on: 3/20/2011 11:27 PM by Author "aero nut" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=10413083

RE: SUPERTIGRE 3000 SPECIAL TUNED CONVERSION
Sure looks like it Bob!!!!!
Posted on: 3/19/2011 11:40 PM by Author "aero nut" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=10410974

RE: GAS/GLOW HOW TO....
Hi Robert!!! but they are going to replace the gasoline with E85 and use 1/3 METHANOL I think it should work, I used straight E85 with plug always lit it worked but les RPM then Gas/Glow.
Posted on: 2/6/2011 9:31 PM by Author "aero nut" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=10317974

RE:
Hi Everybody!!! My name Dr. William R. Pomplun, I just found this thread and would like to know if anybody has plans or templates for a Bud Nosen C310 wing, a friend of mine just crashed his and I need to rebuild the left hand panel of the wing, and it would be helpfull if someone had plans and rib templates that I could go from. If any body out there has a copy of the plans please let me know how much it would cost me to get a copy so i can get started in this rebuilding priject for my friend. I really need your help with this one!! Happy Flying and landings. Dr Bill Pomplun
Posted on: 2/5/2011 6:00 AM by Author "aero nut" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10313967

RE: IDENTIFY THESE 26cc FOUR STROKE GAS ENGINES
Maybe they are the DURO engines, just a guess!
Posted on: 10/24/2010 4:12 PM by Author "aero nut" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=10090942

RE: McCulloch 32cc prop
I forgot to mention that I have mine set up with electronic CDI
Posted on: 10/4/2010 2:56 PM by Author "aero nut" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=10046944

RE: McCulloch 32cc prop
Hi Fred! I am using the APC 18X6W on my 32 MAC I opened the exaust timing to 155 and getting 8000 - 8100 rpms unliomited vertical on my Nitroplanes 71" YAK 54
Posted on: 10/4/2010 2:22 PM by Author "aero nut" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=10046870

RE: Stihl 56CC gas/glow conversion - need feedback
Try a 3 blade 20X8 if available, most 50 to 55CC engines use a 22X8 two blade prop and you are using a 18X6 that's to small in my opinion.
Posted on: 9/6/2010 11:54 PM by Author "aero nut" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=9985198

RE: Stihl 56CC gas/glow conversion - need feedback
Congrat's Bradh!!! and to think that this little monster is running on GAS/GLOW!!!!! not bad, we have come a long way
Posted on: 8/24/2010 2:15 AM by Author "aero nut" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=9955888

RE: gas fuel with glo plug no ignition
YOUR CALCULATIONS ARE RIGHT!!! 2/3 BYRON 15/16 AND 1/3 HEET THEN MIX WITH 2 TIMES GASOLINE "DO NOT ADD EXTRA OIL" IT SHOULD WORK GREAT
Posted on: 8/15/2010 11:45 PM by Author "aero nut" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=9936367

RE: Conversion Photos
Twinstar, I build and sell these airplanes. give me a pm if you are interested.
Posted on: 8/5/2010 2:07 PM by Author "aero nut" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=9913018

RE: Conversion Photos
Here is one of mine a McCulloch 32CC and a Ryobi 31CC on two Charly Boys that I build and sell
Posted on: 8/3/2010 1:38 AM by Author "aero nut" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=9907253

RE: gas fuel with glo plug no ignition
Hey Bob (Avi8tor)! see how far our works has reached!!!! to me this is kind of a certain recognition to our work, finally GAS/GLOW is going INDUSTRIAL and is finally recognized as an alterbnative by the industry.
Posted on: 7/30/2010 3:00 AM by Author "aero nut" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=9898466

RE: G90 TO GAS - HIW TI FIT THE CARB?
Hi Bob sorry to hear about your bro's ryan, but it's fixable isn't ?
Posted on: 7/21/2010 1:50 PM by Author "aero nut" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=9879069

RE: Ryobi reed plate
look into RCGF new 32CC engine it has more power than the 30CC DLE and it cost less: http://www.zjrcgf.com/productdetail.asp?id=113
Posted on: 7/9/2010 2:34 PM by Author "aero nut" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=9854374

RE: Engine conversion give away..
Hi Captin!!! I received my box today and liked what you sent me, I should go to the States tomorrow to send you out a check to cover the delevery expenses. Thank you very much this should make some youngsters happy. Aero Nut (Bill Pomplun)
Posted on: 5/14/2010 3:13 AM by Author "aero nut" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=9732763

RE: converting Saito 180 to gas
Try this guy: www.rcexl.amderc.com he has converted saito 180
Posted on: 5/2/2010 12:24 AM by Author "aero nut" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=9703618

RE: GAS/GLOW HOW TO....
Well Bob!!!! I don't see why it shouldn't work if it works on weed eaters imagine how it would work with the timing an power that these chinese engines have, I sell the RCGF line of engines but I havent tried one with gas glow, but I know this for sure even the gassers with CDI benefit in horsepower increase with the Gas/Glow fuel and CDI combo.
Posted on: 4/24/2010 2:43 AM by Author "aero nut" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=9684624

RE: 26cc 4 cycle ryobi conversion to CDI help
Hi, I thing that trying to ignite at TDC is complicating things for you, the spak should occur before it hits TDC at about 28 degrees, well that is on a 2 stroke gas engine and I think it would be similar on a four stroker, try to move your sensor by rotating it to clokwise about 3/8 to 1/2 inch so it ignites before it hits TDC and see what happens
Posted on: 3/12/2010 9:38 AM by Author "aero nut" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=9575428

RE: MERRY CHRISTMAS TO ALL
Hey Buddy!!!! merry christmas to you too. It has been a long ride, and I am glad that we are still on it. FELIZ NAVIDAD!!!!
Posted on: 12/26/2009 8:49 PM by Author "aero nut" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=9362179

RE: Ryobi 31cc on a Giant big stick?
This plane is totally different then the ultra stick, it has 80" wingspan, 72" long, wheigs aprox. 12lbs (ready to fly) it is sturdier, has 2 piece foam wing joined by a T6 aluminum tube, you can put a 33 to 45CC gas engine and do al 3D stuff or put a 26-31 cc engine and do basic aerobatics or fly like a trainer. I am offering the plane alone ARF for $175.00 as an introductory price or have it available with different power packages 26CC RCGF engine+plane = $395.00; Plane + 31CC Ryobi/electronic ignition(RCEXL) = $350.00; Plane + 45CC RCGF = $450.00 I can also have ready to fly just include your receiver for $200.00 extra on each power combo, this includes the following items. Two 2500 NiMH battery packs one 16X8 APC prop (26CC engine) or one 18x6W APC prop (31CC engine) or one 20X8 wood prop (45CC engine) Five metal gear Digital servos plus one std. servo (throtle). Two "Y" connectors. Three 12"-15" servo extensions. One Power distribution Unit (helps manage your batteries so receiver allways recieves 5.5 volts regardles of servo current draw). One heavy duty switch with charging jack. Installation fee. of course this not includes Shipping and Handling as this varies from area to area (usually arround $45.00 to $50.00 dollars)
Posted on: 12/11/2009 1:17 AM by Author "aero nut" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=9321114