|
RE: BOWMAN RING
Thanks, Bob and the rest for the advice. I will try another ignition and another battery. Aframe2
Posted on: 6/4/2013 5:44 PM by Author "aframe2"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11533512
RE: BOWMAN RING
Kerwin50, I am using a jr 4.8v ignition battery. Mine goes the opposite way. The first few flights run great with no miss at all. Then all of a sudden it will start to miss a little on the next flight. Then continue to get worse on the next succeeding flights.The engine never quits but the miss is annoying. Aframe2
Posted on: 6/4/2013 4:36 PM by Author "aframe2"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11533441
RE: BOWMAN RING
. If the Bowman ring will do that I will gladly opt for that solution. aframe2
Posted on: 6/3/2013 11:30 AM by Author "aframe2"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11532025
RE: BOWMAN RING
I have two Dle-30s. One I've had almost three years and the other one just over a year. How will I know if they have the old ring or the new ring? Aframe2
Posted on: 6/3/2013 9:16 AM by Author "aframe2"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11531857
RE: BOWMAN RING
thanks, tande. aframe2
Posted on: 6/2/2013 5:49 PM by Author "aframe2"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11531289
BOWMAN RING
Does anyone know where I can buy a Bowman Ring for my DLE-30? Thanks, Aframe2
Posted on: 6/2/2013 5:23 PM by Author "aframe2"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11531263
RE: BH Ryan Special 92
Handyman, I checked out the link, but must be doing something wrong as it won't let me log in. Must be a trick question in there somewhere that I haven't solved. Aframe2
Posted on: 9/13/2012 5:19 PM by Author "aframe2"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=11227750
RE: BH Ryan Special 92
Handyman, wiil do, may not start on it for another month or so, I'm getting all the components I need so I can work without delay once I start. One other question while I am thinking about it. The instructions mention nothing about gluing the wing together. This doesn't remain a two piece wing does it? Even if it was meant to be I think I will glue it together. Aframe2
Posted on: 9/7/2012 5:30 PM by Author "aframe2"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=11221205
RE: BH Ryan Special 92
Handyman, I think there is enough wood to hold them. I had some of those nylon hinges tear into on my 1/4 scale gee bee, and replaced them with Robarts. Might as well replace them now. I'm thinking of putting a dle-35 in this plane. What do you think? Why did you change the firewall, do you mind me asking? Thanks, Aframe2
Posted on: 9/7/2012 3:13 PM by Author "aframe2"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=11221075
RE: BH Ryan Special 92
Did anyone change the hinges that came with the kit? I am concerned that these hinges won't hold in a quarter scale plane like this ryan. I was going to use Robart 3/16 point hinges to be safe. Anyone have concerns? Thanks, Aframe2
Posted on: 9/7/2012 12:55 PM by Author "aframe2"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=11220947
RE: RYAN ST-A
F4U-Corsair, thanks for the information, since my inquiry about the Ryan Sta I have bought two, thanks to the members of this forum who forwarded the information. Thanks for all of your help. Aframe2
Posted on: 8/27/2012 2:20 PM by Author "aframe2"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=11208080
RE: RYAN ST-A
Handyman220, sent you a reply, don't know if you got it, but I am interested in that plane. Do you have any pictures, and what are you asking? Thanks, Aframe2
Posted on: 8/26/2012 3:28 AM by Author "aframe2"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=11206226
RE: RYAN ST-A
Thanks, GSNut, I bid on the kit. Thanks again for the info. Aframe2
Posted on: 8/25/2012 2:45 PM by Author "aframe2"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=11205777
RYAN ST-A
Looking for a Ryan St-a, arf, kit, or someone willing to sell one they already own. Can anyone help? Thanks, Aframe2
Posted on: 8/25/2012 9:40 AM by Author "aframe2"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=11205537
RE: Whats up with kits?
I've been looking for a Ryan St-a kit,arf, or someone with one willing to sell. I want it around 80/90 inch wingspan. Can someone tell me where I can get one?
Posted on: 8/25/2012 9:35 AM by Author "aframe2"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11205535
RE: ZENOAH G26 RPM
for the advice. Aframe2
Posted on: 8/25/2012 9:11 AM by Author "aframe2"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11205511
ZENOAH G26 RPM
I have a Zenoah G-26, turning a 18x8 Xoar prop. I can't get any more than 6500 rpms. Is this too much prop for this engine? If so what size prop are you running with this engine? The instructions say the engine should be turning between 7500-8500 rpms.Thanks Aframe2
Posted on: 8/24/2012 2:38 PM by Author "aframe2"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11204781
3 CYLINDER RADIAL
I'm looking for a three cylinder radial engine in the range of 45cc-60cc. Any one have any suggestions on brand and reliability? Thanks, Aframe2
Posted on: 8/11/2012 4:43 PM by Author "aframe2"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11189719
GEE BEE Y
Does anyone know where I can buy a GEE BEE Y kit or arf, doesn't matter which, just need good quality. I lost mine today in a cornfield and it looks like the farmer will find it before I do. Thanks, Aframe 2
Posted on: 7/17/2012 3:46 PM by Author "aframe2"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=11159097
Pacific Aeromodel Gee Bee Y !.20
I cracked up my wheel pants on this model. I would like to purchase a new pair. Anybody know where I might find a pair, or someone that molds them specifically? Thanks, Aframe2
Posted on: 7/10/2012 5:55 PM by Author "aframe2"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=11150656
OPTO KILL SWITCH ROUTING PROBLEM
seem to find my mistake. Any help is appreciated. Thanks, Aframe2
Posted on: 6/27/2012 12:42 PM by Author "aframe2"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=11134079
RE: ZENOAH G26 BACKFIRING
Thanks for all of your advice. The battery was dead, running like a champ. What size may battery is safe for that ignition? Aframe2
Posted on: 6/27/2012 12:23 AM by Author "aframe2"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11133428
ZENOAH G26 BACKFIRING
, Aframe2
Posted on: 6/25/2012 4:16 PM by Author "aframe2"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11131651
RE: RCEXL MINI TACHOMETER
Bob nj, good idea, I will try the tach that is working on the Zenoah. Thanks, Aframe2
Posted on: 6/19/2012 2:49 PM by Author "aframe2"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=11124223
RE: RCEXL MINI TACHOMETER
Sorry if I wasn't clear. I have a rcexl mini- tach hooked to a rcexl ignition and it works fine. I have another rcexl mini-tach that I hooked up to a Zenoah ignition module that continuously cycles numbers. My question is, is the Rcexl mini-tach compatible with a Zenoah ignition module? Aframe2
Posted on: 6/9/2012 3:22 PM by Author "aframe2"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=11112580
RCEXL MINI TACHOMETER
setup? Thanks, Aframe2
Posted on: 6/9/2012 9:26 AM by Author "aframe2"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=11112348
RE: RCEXL KILL SWITCH
Thanks for your help. I ordered the RCEXL kill switch and tachometer also. Thanks again, Aframe2
Posted on: 6/4/2012 8:28 AM by Author "aframe2"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11105832
RCEXL KILL SWITCH
Does anyone know if I can use a Rcexl opto kill switch on a Zenoah G-26 with Electronic ignition? Do I need a kill switch? Is there a way I can use my transmitter to kill the engine, other than the throttle stick? Thanks, Aframe2
Posted on: 6/2/2012 2:33 PM by Author "aframe2"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11103999
RE: JR XP662
you are right Iflyglow. the transmitter is more than 10 years old. I'll just ditch it. thanks, Aframe2
Posted on: 5/27/2012 5:54 PM by Author "aframe2"
in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11096673
RE: JR XP662
Can that cell be replaced if that is the problem? Aframe2
Posted on: 5/27/2012 1:00 PM by Author "aframe2"
in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11096417
| 
