Hobby shops in Wisconsin
Any good hobby shops to visit around Brookfield area?
Posted on: 5/19/2013 10:57 AM by Author "amc72" in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=11516122

RE: Do I need a 6 or 7 channel receiver?
DX8 1 servo on e-flits retracts.
Posted on: 8/13/2012 8:33 PM by Author "amc72" in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=11192476

RE: Do I need a 6 or 7 channel receiver?
Thanks
Posted on: 8/13/2012 4:33 AM by Author "amc72" in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=11191357

Do I need a 6 or 7 channel receiver?
I have an electric FW190 I'm trying to complete with the following controls. Throttle, single elevator,and rudder. Dual aileron, and flap servo's. It also has Electric retracts. I'm assuming some type of Y on the flaps, or reversing the head of the servo. I don't want a Y on the ailerons. Link to product page. http://www.vqwarbirds.com/product_info.php?cPath=31&products_id=44&osCsid=7170e5c1e9d2c94f5610a3d8c2d528ca Thanks
Posted on: 8/13/2012 12:22 AM by Author "amc72" in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=11191235

RE: 60 size ARF
I had a pulse for my second plane. I now have 2 in different sizes, and wish they had a bigger one.
Posted on: 7/28/2012 10:43 PM by Author "amc72" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=11172934

RE: Fellow RC brothers, I need your help!
Done
Posted on: 4/14/2012 1:28 AM by Author "amc72" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11041225

RE: Tank mount in older planes
I put my tank in the normal spot. I had a 3 line system with a fuel dot, line to the carb, and vent running out the bottom. I ran an Evolution 26. I had the RX pack shoved most of the way under the servo tray and the ignition battery (2 cell lipo) in front of that. Balanced out perfectly.
Posted on: 2/20/2012 8:34 AM by Author "amc72" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=10967425

RE: Second Plane - H9 Pulse 125 XT?
I have the mini and 25 (my 2nd plane). Love them! I added a 3rd bolt to the gear, and no wheel pants for our grass feild. I just wish the 125 had an 80 inch wing. It would defiantly have one then.
Posted on: 10/11/2011 8:51 PM by Author "amc72" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=10760898

RE: Nitro Planes Disappointment
http://www.hobby-lobby.com/scale_4_blade_11_x_10_variable_pitch_prop_18581_prd1.htm?pSearchQueryId=1488628 Does this look like it
Posted on: 6/5/2011 9:44 PM by Author "amc72" in the forum "Electric General Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=10558871

RE: Larger electric airplane
You might look into VQ warbirds. I got a good deal from Hobby People. It has a battery hatch on the side.
Posted on: 5/15/2011 10:33 PM by Author "amc72" in the forum "Electric General Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=10522458

RE: Cant find any ten pound electric planes.
You might look at the VQ warbirds. I got a good deal on a 60 sized FW 190 from hobby people. It has a battery hatch on the side.
Posted on: 5/15/2011 10:30 PM by Author "amc72" in the forum "Electric General Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=10522454

RE: 4* 120 replacement using my Evolution 26
Not really into stik's. A friend of mine let me fly his and I was inverted and didn't know it a couple of times. I'll look into the Super Sportster. Thanks
Posted on: 5/3/2011 10:10 PM by Author "amc72" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=10500408

RE: 4* 120 replacement using my Evolution 26
Yep that would be the former owner and pilot of the 260. Flutter induced by the stripping out of the aileron servo gears. I saw cut across the field in front of me got nervous when it when they started to yell at me and looked over my shoulder and I would guess a on the other side of the taxi way heading back toward the field. It went in on the taxi way just behind me. At that point I was totally distracted and my plane auto piloted itself to the ground.
Posted on: 5/2/2011 12:34 PM by Author "amc72" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=10497284

RE: 4* 120 replacement using my Evolution 26
Sig 4 star 120 size
Posted on: 5/2/2011 8:41 AM by Author "amc72" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=10496765

4* 120 replacement using my Evolution 26
I'm looking for a replacement for my 4* 120 lost it yesterday when I had to duck and dodge 27% extra that ended up crashing behind the pilot stations out of control. I guess I should be happy I wasn't hurt the div-it about 5 to 7 feet away from where I was flying. It has to be an ARF I don't have time, or skills to build. I would prefer to have a 2 piece wing. IMAA legal Thanks
Posted on: 5/2/2011 7:36 AM by Author "amc72" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=10496630

RE: elec conversion FW 190(VQ)
Did you ever get any info? I just bought the same plane.
Posted on: 4/1/2011 2:09 PM by Author "amc72" in the forum "Glow to Electric Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=10436819

RE: second plane
I second the pulse and the 4 Star was my first giant scale.
Posted on: 2/22/2011 12:26 AM by Author "amc72" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=10354617

RE: Brushless Motor Brands
No the 380 is smaller sorry for any confusion. It might fly with the 380 but will be under powered. I would personly go with a 450 or 480. I googled the motor in question and pulled up the united hobby site and they had some choices in the 400 and 480 at a lower price .
Posted on: 2/17/2011 7:48 AM by Author "amc72" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=10342676

RE: Brushless Motor Brands
More power is always better. You would be disappointed with less.
Posted on: 2/16/2011 10:57 PM by Author "amc72" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=10342100

RE: Sig Four Star 120 Engine Choosing
I really like my 120 with the evolution 26. Mounted right up using the supplied mounts.
Posted on: 10/26/2010 10:02 PM by Author "amc72" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10096633

Evolution 50GX Spinner
How do I determine what size spinner? It's going on a 27% extra 260. Any suggestions on a budget supplier are helpful Thanks
Posted on: 9/23/2010 2:12 AM by Author "amc72" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10021333

RE: Flying Field Access
This is an interesting subject as were taking up the question of visitors this weekend. I think the general thought will be to go with the 3 day limit with the provision to extend on an individual basis. Example if you fly for a week give 5 for the mower. We also have an associate for 15 a year with no voting rights currently. This is coming up for us for two reasond. One our field was covered in the past by the LHS insurance and now the leased and we have an extra insurance policy. Two we have another club in town that we offered a reciprical membership for 10 a year and they refused for the most part, and still come to the field as guests. AMA is required for members and guest.
Posted on: 6/19/2010 4:18 AM by Author "amc72" in the forum "AMA Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=9812989

RE: My Stupid F4U Corsair Crash
Wow looks like Mine after my crash monday. How'd it come out?
Posted on: 6/4/2010 3:31 AM by Author "amc72" in the forum "Crash & Rebuild"
http://www.rcuniverse.com/forum/fb.asp?m=9779864

RE: RCGF Engines
Glad I read the end of this thread. I almost ordered one back to the drawing board for an engine for the edge 260
Posted on: 5/4/2010 10:08 PM by Author "amc72" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9711159

RE: Official Hobby Zone
Hey all I've been thinking about resurecting the cub. Had the ESC catch on fire. I got the fire out pretty quickly and only a little foam melted away. I have a extra motor and ESC on a plane that I just didn't like the way it flew. What I have is the A2208/12 would this work in my super cub?http://www.suppomodel.com/ It's the A2208/12 1800KV A2208/12 AUW range is 200 - 500 g 2 or 3 cell lipo. I was thinking of using a 2 cell lipo on a ubec for power and a regulare receiver pack for the receiver and servos. Thanks
Posted on: 4/17/2010 2:44 AM by Author "amc72" in the forum "Park Flyers & Backyard Flyers"
http://www.rcuniverse.com/forum/fb.asp?m=9667206

RE: Hanger9 Extra260 Engine suggestions
[color=#000000][/color]fianally figured out how to get my post to show.cool vid thanks again
Posted on: 2/20/2010 9:45 AM by Author "amc72" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9520010

RE: Hanger9 Extra260 Engine suggestions
thanks for the suggestions. I'm reading the link now. Thanks again
Posted on: 2/17/2010 11:13 PM by Author "amc72" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9513829

Hanger9 Extra260 Engine suggestions
I’m looking for advice on an engine for my 260. http://www.hangar-9.com/Products/Default.aspx?ProdID=HAN2750 The DA 50 a little out of my price range right now. I got a Fuji BT-50SB with the plane deal. I know nothing about the engine, and it doesn’t look like it will line up on the fire wall very well. Its foot print looks to be almost to the corners of the box. The previous owner had another engine attached so it has holes already in the fire wall. That will be another question fill in the holes with dowels and epoxy or cut the old plywood out and replace it. Thanks
Posted on: 2/17/2010 6:21 PM by Author "amc72" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9513038

RE: NEED T-28 or Corsai Motor Help!!!!!!!!!!!!
Let me know if you find one I need 1 due to the front set screw.
Posted on: 6/12/2009 1:09 PM by Author "amc72" in the forum "Park Flyers & Backyard Flyers"
http://www.rcuniverse.com/forum/fb.asp?m=8846875

RE: Installing hinges
You guys crack me up! Again thanks for the info. I'm just going to keep posting questions this is my first ARF build.
Posted on: 1/24/2009 2:59 AM by Author "amc72" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=8394429