RE: How to get a refund from Fly Eagle Jets?
Quote!! [size=4][b]They are Chinese, they have NO values, NO morals, and they have YOUR money[/b][/size] end quote [8D] It's going to be a long day [:D] I know what to do ...I'm going to make a QUOTE...and let's see how long would it take to be removed..yea that's it.[:D]
Posted on: 5/23/2013 5:36 AM by Author "basimpsn" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11520072

RE: How to get a refund from Fly Eagle Jets?
[quote]ORIGINAL: raptureboy It's simple. [b][size=2][quote]They are Chinese, they have NO values, NO morals, and they have YOUR money[/quote]. [/size][/b]Write all the contracts you want and ask for pictures they mean nothing to them.  Ask any manufacturer that has products produced there and they will tell you; if you don't watch them every step of the way they will rip you off and cut corners. Look at all the recalls and defective products they pawn off on us. My friends dog was nearly killed when the name brand dog food he was feeding him was found to have melamine in it. The bitterness of poor quality remains long after the sweetness of a bargin price, and I would never pay up front to someone 1000's of miles away for what is essentialy a stock product. Good luck. [/quote] [quote]Ok gentlemen, this is getting WAY out of control. If you can't discuss this issue without attacking those that you don't agree with then I would suggest you don't enter into the discussion. Because if this bickering and attacks on each other continue I'll hand out some administrative actions on those that can't get along. The choice is entirely up to you on how we proceed from here. Ken[/quote] I guess the above statement is OK ??
Posted on: 5/23/2013 5:22 AM by Author "basimpsn" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11520041

RE: My Maiden Flight: FEJ Viper M
[quote]ORIGINAL: EmericChou <a href=''http://v.youku.com/v_show/id_XNTYwNTIyNTIw.html'' target=''_blank'' vglnk_1369230399515=''9''><font color=''#00265e''>http://v.youku.com/v_show/id_XNTYwNTIyNTIw.html The video... [/quote] This could be a NEW JET Pilot and don't know the issue we have with FEJ.. So I'm going to give him the benfit of the doudt and congratulate him an a successful flight Congrat! man wish you many more..
Posted on: 5/22/2013 6:59 AM by Author "basimpsn" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11519126

RE: RCU member and jet modeler in a serious accident
Hope he makes a full & speedy recovery..thoughts and prayers.
Posted on: 5/17/2013 11:49 AM by Author "basimpsn" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11514418

RE: The ultimate RC Jet
[quote]ORIGINAL: erbroens I also like how it looks.. but with this kind of jet fighters is the carrier needed at all? http://www.youtube.com/watch?v=DYIVRdwd_zI&list=PLBDABFE5AA4DE0887 [/quote] panorama view cameras to see the Plane Handlers or Catapult Crew cool.
Posted on: 5/17/2013 9:20 AM by Author "basimpsn" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11514278

RE: Some more
That's scary but cool [;)]
Posted on: 5/17/2013 7:13 AM by Author "basimpsn" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11513546

RE: Is fly Eagle still in business (US Department)?
I might be a virus I try to quote (Afterburner) you but it comes out weird [X(] .
Posted on: 5/16/2013 9:09 AM by Author "basimpsn" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11513224

RE: Why do people keep calling it TURBIN as in trashbin instead of BINE?
[quote]ORIGINAL: warbird_1 Happy now ? !! lol [/quote] LMAO
Posted on: 5/16/2013 5:34 AM by Author "basimpsn" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11513006

RE: Is fly Eagle still in business (US Department)?
[quote]ORIGINAL: DiscoWings [quote]ORIGINAL: Molnar142 Another FEJ thread. When will the madness stop? Let me guess, you're going to propose a shirt too? Maybe instead of ''Where's Waldo?'' it's ''Where's FEJ?'' STOP! [/quote] No I don't want a damn shirt I just want replacement lights that I fried when trying a FEJ light controller: https://www.youtube.com/edit?ns=1&feature=vm-privacy&video_id=38uZXu30pN4 [/quote] Not sure you will find a FEJ Light controller on my channel [8D]
Posted on: 5/16/2013 5:08 AM by Author "basimpsn" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11512990

RE: Kudos Kingtech service!
I'm still in Awe how powerful these engine are..Unlimited vertical takeoff full of fuel and smoke oil amazing [;)] As for fuel pumps Ive had one engine with a faulty pump..So Barry It would be a shame to let bad pumps give those powerfull engine a bad name[;)] https://www.youtube.com/watch?v=nU7wG_4mLrE https://www.youtube.com/watch?v=ZjZi7JRD19g
Posted on: 5/16/2013 4:43 AM by Author "basimpsn" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11512978

RE: Why do people keep calling it TURBIN as in trashbin instead of BINE?
[quote]ORIGINAL: DiscoWings [b]Turbin[/b]: [image]http://www.women-cloth.net/pic/12/maharaji-sultan-sheik-turban-headdress-bollywood-hat-costume-accessory-gold-bead.jpg[/image] [b]Turbine[/b]: [image]http://www.kingtechturbines.com/store/images/K180G_front.jpg[/image] Isn't it supposed to be called TURBINE as in the BINE part? Are the called BIN in Germany or Europe? [/quote] [:D][:D]
Posted on: 5/16/2013 4:21 AM by Author "basimpsn" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11512967

RE: C-ARF Ultra Flash build Thread + Video
[quote]ORIGINAL: TUMBLER Yeah But I watch your video and you came in super fast and ran off the end of the runway. I definitely had mine slowed down way more than that but it was still not at a speed that I would've expected a tipstall. I want mine to land at a normal speed so I am not slamming on the brakes trying to get it to stop. [quote]ORIGINAL: basimpsn [quote]If you tip stall
Posted on: 5/15/2013 9:34 AM by Author "basimpsn" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11512256

RE: Blue Angel and Eurofighter over PGRC
[quote]ORIGINAL: redtail [size=3][/size]Basil, FIF is the First In Flight Jet Event that will be held in Wilson, NC on May 24 - 26. I'm going down to watch, stay overnight and return on Sunday. Chic [/quote] OOPS!![:)]
Posted on: 5/15/2013 8:38 AM by Author "basimpsn" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11512233

Blue Angel and Eurofighter over PGRC
Finally got the chance to test out my new smoke system on a old skymaster F-18C jet during a demo flight @ pgrc open house.... I love it [8D] https://www.youtube.com/watch?v=nU7wG_4mLrE And my Eurofighter https://www.youtube.com/watch?v=ZjZi7JRD19g
Posted on: 5/15/2013 4:57 AM by Author "basimpsn" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11511147

RE: Blue Angel and Eurofighter over PGRC
[quote]ORIGINAL: redtail [size=3][/size]Basil, this is Chic White, I'm as angry as I can be. It rained and rained and the wind blew fairly well almost all day here in Alexandria. So I decided not to come out to PGRC thinking it is raining cats and dogs there also. I'm so sorry I missed your flying the jet. Really enjoyed our last conversation. We shall hook up again soon. Great landing and smoke. I'm partial to the Air Force so I'll let you get away with the Navy stuff. Smile. Chic [/quote] Hey Chic..I felt the same way and went back to bed after looking outside and saw the wind and rain .. then a club member call me about 11:00am and remind me about doing the noon Jet Demo saying there is no rain and a big turnout [&o] tt was a good turnout and flight despite the wind conditions. [quote]Are you still up in MD? Dont forget that FIF is next week. [/quote] I'm living in MD now [&o][:)] What is FIF? is that the Basic IMAC? if so this will be my first attempt at Imac [;)]
Posted on: 5/15/2013 4:43 AM by Author "basimpsn" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11512041

RE: Blue Angel and Eurofighter over PGRC
[quote]ORIGINAL: rhklenke [quote]ORIGINAL: basimpsn Finally got the chance to test out my new smoke system on a old skymaster F-18C jet during a demo flight @ pgrc open house.... I love it [8D] https://www.youtube.com/watch?v=nU7wG_4mLrE [/quote] Did they increase the side of that paved runway, or are you that good?!? Its been many years since I've been there, but I remember that runway
Posted on: 5/15/2013 4:26 AM by Author "basimpsn" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11512029

RE: C-ARF Ultra Flash build Thread + Video
[quote]If you tip stall the Flash, Ultra or Classic its because the plane got too slow. A rearward CG can exacerbated a tip stall if the plane is already slow and pilot pulls the nose up too much, which obviously induces drag.[/quote] Any Jet will tip stall if it gets too slow and try to flare..I only had 5 flight on the Ultra Flash and never experince any tip stall because I fly it or any other jet all the way to final..I do notice with full flaps the back end goes up..not sure if this means its too much flaps.
Posted on: 5/15/2013 4:14 AM by Author "basimpsn" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11512025

RE: C-ARF Ultra Flash build Thread + Video
[quote]ORIGINAL: Jack28 Is there anyone using the AT landing gear legs that have issues ,like soft springs , bouncing on landing and swerving down the runway on take off. I fought this issue recently and have never had an issue keeping a jet sttaight on take off or bouncing landings. A friend with a Flash helped me with UF landing technique and I learned to fly a slower pattern and land slower and that took care of the bouncing for the most part (Thanks Alot Boston Brian ,I really Appreciate It!!!). The issue with swerving down the concrete runway (grooved airport runway) was out of control!! I did notice that the r/s tire had some runout and would rub on the leg , everytime it would rub the jet would squat down on that side.(Fixed the rubbing/ was a little bit better). Then as a temporary fix ,I bound the AT trailing link knee joint on both main legs with electrical tape (to prevent the strut from compressing) just to try it out. The swaying was now totally eliminated , and the jet is WAY more forgiving on landings. No more bouncing! Even when landing is a little fast! It stuck everytime on landing and didn't bounce at all. This has led me to believe that the gear springs are too soft, and as the the jet starts to settle on the gear the wing angle of attack changes (more positive) and causes the jet to get airbourn again. I do know that proper landing technique is required , Too fast and you bounce, although tapeing the mains ridgid made this jet so much easier to land without bouncing. I have over 260 flights on my Boomerang and never have had any bouncing issues. I also owned an Classic Flash /with the origional straight compression Comp arf struts and it never bounced like this jet does. I have the origional straight compression struts from my old Composite ARF flash on my Boomerang and they work great . I was thinking of changing out the AT legs, or at least getting higher tension springs (if they make them??) , I have also considered the same straight struts that came with the Classic flash. Any advice or suggestions are welcome .Thank You , Jack. [/quote] At post 1885..that's the problem I was talking about. My fix was to shorting the spring by removing 4 rings and it fix the problem alittle but I might have to remove 4 more [;)]. http://www.youtube.com/watch?v=jTExWRVGQHA
Posted on: 9/18/2012 12:24 PM by Author "basimpsn" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11232624

RE: Lost JetCAT p80 in Germany on sep 14 in bad Neuenahr.
[:)]
Posted on: 9/18/2012 8:48 AM by Author "basimpsn" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11232389

RE: KINGTECH X JETCAT X JETCENTRAL X WREN
My JC RHINO starting motor died two days after returning from service [&o] I sold the engine 3yrs later without getting my replacement motor. I'm not saying this could be you but each individual will have there own testimony. P.S Kingtech Power [:D][:D] http://www.youtube.com/watch?feature=endscreen&v=aVEGCEvS58Y&NR=1
Posted on: 9/18/2012 6:26 AM by Author "basimpsn" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11232213

RE: KINGTECH X JETCAT X JETCENTRAL X WREN
I only have experience with Kingtech 170 and 180 and both proven to be true with thrust ratings. My F-18C full veritcal take off without hesitation [;)] http://www.youtube.com/watch?v=fIwyV0Inwno&feature=player_embedded#!
Posted on: 9/17/2012 12:29 PM by Author "basimpsn" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11231354

RE: Weatronics....considering a change .is it worth the investment?
[quote]My final conclusion on my Bandit loss was posted in the Weatronics thread, post # 1881. In summery. the model was lost due to poor radio link quality. This was obvious from the recorded data and verified by Weatronics. The reason for the poor RF link was not determined, and probably never will be. HOWEVER, the Wea system worked admirably well in that the receiver data was being recorded right until the final loss of control. Examining this data enabled us to rule out all the other usual crash causes. Without this data, this crash would have been just another unexplained lock out. [/quote] Question.. did your weatronics Rx had daul receivers ? and if so did the data shows both rx suffer the same weak signal? P.S Maybe weatronics should look into a new TX with weak link booster hidden inside the Telemetry down-link just like cellphones...Just kidding [&o]
Posted on: 9/17/2012 6:02 AM by Author "basimpsn" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11230930

RE: With or without rudder on the Rookie II
[/quote] any 70 oz/in servos with correct linkage geometry will do. Sorry, I don´t have any videos, but have a story: Many years ago a guy was doing low level knife edge passes in a r/c event with a HS when the CD went with a microphone to the flight line and asked to the pilot: - Nice flying mister! Can you narrate your maneuvers while you fly? the pilot said: - Ehhhhhhhh.....and then it crashed. the HS was no more. Fortunately both of my friends where very cool minded, and no assasination attempt happened after this.LOL.. now they laugh everytime they remind this. Enrique [/quote] Thanks for that servo info [;)] As for that announcer, he should have known better [&:] [;)]
Posted on: 9/13/2012 5:59 AM by Author "basimpsn" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11227109

RE: With or without rudder on the Rookie II
[quote]Well I have a 10 year old Hot Spot which is a similar platform, it does have rudders which look very insignificant! “BUT� when flying the aircraft they seem to work very well when doing SLOW ROLLS and KNIFE EDGE! Yes the plane will knife well! [/quote] Knife Edge on a hotspot [X(] Any videos ? and what torque servo are you using?
Posted on: 9/12/2012 10:47 AM by Author "basimpsn" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11226267

RE: C&C Model M346 build and painting thread
Looking at your work from start to finish shows I'm no where close to being an RC GUY [:)] Very nice work man[;)]
Posted on: 9/12/2012 6:06 AM by Author "basimpsn" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11225984

RE: Alternative uses for turbine engines
Its good for supermarket runs. http://www.youtube.com/watch?v=HuI1AQJSR_M [quote]This happened to a friend doing engine tests and the police came and knocked on his door upon a neighbours noise complaint (all in one day only). Police told him off and to keep the noise to a minimum then asked if they could come in to see the jets because theyre so cool. Imagin if they asked to fire them up again, HA. [/quote] The same thing happen to me [&o] but my problem was the cop keep calling other cops (10 of them + firetrucks) to come checkout my jet, by time they left, I ran out of jet fuel and ECU batteries [:)]
Posted on: 9/12/2012 4:43 AM by Author "basimpsn" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11225917

RE: Jet Speed Event 2012
I like your canopy mod for your HOTSPOT [;)]
Posted on: 9/11/2012 9:09 AM by Author "basimpsn" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11225060

Model Jet Engine In A Glass Enclosure
Jet Engine In A Glass Enclosure http://www.youtube.com/watch?v=J7Om9zo1U78&feature=related
Posted on: 9/10/2012 7:21 AM by Author "basimpsn" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11223632

RE: 100lbs thurst micro jet Bladon Micro Jets
The turbine design for this car [;)] http://www.youtube.com/watch?v=V6GK3qdqv20
Posted on: 9/7/2012 9:04 AM by Author "basimpsn" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11220710

RE: 100cc YAK 3d setup help
[quote]ORIGINAL: FenderBean I was wondering what CG people are using I cannot get the plane to do some 3d stuff. Harrier problem the wings seem to tip stall even at extreme angles, inverted harrier no way. DA 100 with Cans 30 pounds [/quote] Wow! I was just thinking the same thing.
Posted on: 9/4/2012 8:03 AM by Author "basimpsn" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=11216896