RE: ........."BELT-CP THREAD"........
Hey heli pilots of belt cp found a complete metal upgrade head,swash plate and tail assembly for $62.00 inculding shipping its coming from Hong Kong I 'll post results and picks when it gets her found it on ebay
Posted on: 5/8/2008 10:58 AM by Author "beltcp flyer" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=7471163

RE: ........."BELT-CP THREAD"........
If your using the stock gyro check the switch on it it should be in the reverse position not in normal position not sure why but thats how mine is and also you did have to take the belt off at the tail gear to change the tail assembly correct or did you just keep the stock gear and shaft. You might have turned the belt with out noticing, it's just a thought. Have fun fly safe Always keep your eye on the birdy
Posted on: 4/30/2008 11:21 AM by Author "beltcp flyer" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=7439285

RE: ........."BELT-CP THREAD"........
Yes I was looking at the same one 35amp with a bec to control the battery voltage flow for the servos and reciever that one was on the rc-hover link I put in the last thread I wrote but it was $99.00 but it has a 2 year warrenty here is another link for heilhobby for esc with or with out the bec check out the SONIX-30A brushless ESC with the bec and ferrit ring anti glitch inline with the bec its $40.00 http://www.helihobby.com/html/helicopter_speed_controller.html
Posted on: 2/24/2008 8:17 PM by Author "beltcp flyer" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=7131408

RE: ........."BELT-CP THREAD"........
personaly my brother and I have 3 belt cps and all of the esc have had problems and 2 of them burned up the third one we took the donut or the interferance componant off the esc and it is working good but still gets hot but does not loose power but we have gotten new esc hobby wing or the mystery or the dynam there is a link some were in a thread back around 41 to 50 or you can search those type esc is the way to go if anybody has gotten one of these can you please post a link I think you can get them at helidirect. Hope this helps, fly safe have fun. Always keep your eye on the birdy here is a couple of links http://www.xheli.com/spco.html http://www.hobbywing.com/english/ArticleShow.asp?ArticleID=378 http://www.hobbywing.com/english/Product.asp?BigClassName=BL%20ESC%20for%20Aircraft%20and%20Heli http://www.xushobby.com/servlet/Categories?category=Electric+Speed+Control+(ESC)%3ADynam here is one in connetecut they have good batteries too http://www.rchover.com/inc/sdetail/127060
Posted on: 2/24/2008 3:51 PM by Author "beltcp flyer" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=7128308

RE: TREX450 for good price..............
Check this one out $344.00 plus shipping http://www.rc-expert.com/product-package.php?pid=681 I think this is agood deal
Posted on: 2/18/2008 9:32 AM by Author "beltcp flyer" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=7094446

RE: ........."BELT-CP THREAD"........
just disconnect the links from swash plate from your servos at the swash plate then remove the allen head from bottom of gear,it has a little nut on the other side,then you can slide the main shaft out then you can replace what you need there is another allen head bolt through the head part now disconnect the other linkeages from head assembly to swash plate after removing the bolt now you can slide the head off and remaing components , hope this helps fly safe have fun always keep your eye on the birdy
Posted on: 2/12/2008 9:47 AM by Author "beltcp flyer" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=7063127

RE: ........."BELT-CP THREAD"........
There should be a toggle switch on the left top corner of the esky radio for idle up toggle it up for idle up and down for normal
Posted on: 2/11/2008 2:58 PM by Author "beltcp flyer" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=7059064

RE: Honeybee King v2 tuner shop
You could have gotten a esky belt cp for about the same price its just alitte bigger450 size about 25" long, I would have sent it back and you probably still can I first got the HBK2 and the esc burned up on the second battery then the motor 2 times so I went with the 3900 KV esky brushless outrunner and the mystery 30 amp esc and that is the best way to go if you plan on keeping the HBK2. Fly safe have fun heres a couple of ebay links http://cgi.ebay.com/ESKY-BELT-CP-6CH-RC-HELICOPTER-3D-RTF-CCPM-US-SELLER-US_W0QQitemZ220199109072QQihZ012QQcategoryZ2563QQssPageNameZWDVWQQrdZ1QQcmdZViewItem motor http://cgi.ebay.com/ESKY-BELT-CP-6CH-RC-HELICOPTER-3D-RTF-CCPM-US-SELLER-US_W0QQitemZ220199109072QQihZ012QQcategoryZ2563QQssPageNameZWDVWQQrdZ1QQcmdZViewItem and esc http://cgi.ebay.com/Mystery-30A-Brushless-Motor-Speed-Controller-RC-ESC_W0QQitemZ110223005371QQihZ001QQcategoryZ84444QQssPageNameZWDVWQQrdZ1QQcmdZViewItem Always keep you eye on the birdy
Posted on: 2/11/2008 6:22 AM by Author "beltcp flyer" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=7057215

RE: Honeybee King v2 tuner shop
You can get a 10t here for 2.3 shaft and also search for others http://www.rc711.com/shop/index.php?cPath=22_41 the have HBK2 and belt cp parts and many others. Fly safe have fun Always keep your eye on the birdy
Posted on: 2/10/2008 7:04 PM by Author "beltcp flyer" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=7054919

RE: ........."BELT-CP THREAD"........
Hey bignose13 had the same problem with my tail blade pitching would not go all the way to right was binding, I loosened the set screw for the tail blade assembly and pushed it on the shaft more, there was just alittle bit of shaft showing after I pushed it on more there is a notch for the set screw on the shaft about a 1/16 the set screw is small you have to use a allen to loosen and tighten it. That took care of it now I have full movement in both directions. Fly safe have fun Always keep your eye on the birdy
Posted on: 2/7/2008 9:42 AM by Author "beltcp flyer" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=7038037

RE: ........."BELT-CP THREAD"........
here is a site the has all parts for belt cp it takes about a week to get them I ordered mine on the 31st of Jan got them this morning USPS and they will deliver on Sundays http://www.rc711.com/shop/index.php?cPath=22_28&sort=2a&filter_id=10&page=1 hope this will help. Fly safe have fun Always keep your eye on the birdy
Posted on: 2/7/2008 9:27 AM by Author "beltcp flyer" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=7037982

RE: BLADE 400 VIDEO
for cost and availibilty of parts the e-sky belt cp is a cost effective way to go and later on add the 2.4 raido and reciver with the digital servos check it out http://cgi.ebay.com/ESKY-BELT-CP-6CH-RC-HELICOPTER-3D-RTF-CCPM-US-SELLER-US_W0QQitemZ320211968123QQihZ011QQcategoryZ2563QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Posted on: 2/2/2008 8:41 AM by Author "beltcp flyer" in the forum "E-Flite Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=7011537

RE: How do you hold your sticks?
when you start 3 d you will see you have better control with finger and thumb placement of other fingers on radio also will help
Posted on: 2/2/2008 8:32 AM by Author "beltcp flyer" in the forum "E-Flite Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=7011523

RE: Dualsky SL 1300mAh lipo packs, anyone have expierence with these?
here is another place for batteries and chargers have ha 8 of these bought them 18 months ago still going strong about 15 min of flight http://rchover.com/inc/sdetail/66544
Posted on: 2/2/2008 8:26 AM by Author "beltcp flyer" in the forum "E-Flite Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=7011504

RE: ........."BELT-CP THREAD"........
Check to make sure your blade holders are not to tight if the blades do not pitch smoothly then they are to tight and it will cause a vibration. Have fun fly safe Always keep your eye on the birdy
Posted on: 2/2/2008 8:11 AM by Author "beltcp flyer" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=7011475

RE: ........."BELT-CP THREAD"........
just wanted to share this with everyone on chargers i have 4 of these and they work great from 1 to 4 cell http://rchover.com/inc/sdetail/40652 they have a cooling fan and it takes about 45 min. to charge 2100 lipos and about the same or less for 1350 they are located in US. They also have a good price on batteries
Posted on: 2/1/2008 8:44 AM by Author "beltcp flyer" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=7006262

RE: I need new LIPOs. What kind to get
check out this site good batteries and quilty http://www.rchover.com/lipos
Posted on: 1/29/2008 10:22 AM by Author "beltcp flyer" in the forum "E-Flite Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=6989451

RE: HELP WITH CX2 AFTER CRASH RX OR 3-IN-1??
I had same thing happen th o my cx2 AND I TOOK THE 4IN1 APART WHICH YOUR NOT SUPPOSE TO FOR WARRENTY REASONS AND HAD BROKEN ONE OF THE PINS THAT HOLDS THE TWO BOARDS TOGETHER WELL GOT CREATIVE AND USED A LIGHTED MAGNIFING GALSS AND SOLDERED IT BACK IN NOW I AM BACK IN THE AIR GOOD LUCK
Posted on: 1/24/2008 10:58 AM by Author "beltcp flyer" in the forum "E-Flite Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=6961679

RE: blade 400 yes or no ?
The cx2 is a very good trainer easy to hover the longer you take to get it in the air the more unstable any heli will be so try to get it in the air as quickly as you can when you deside to move on for the cost both parts and rtf I went with the belt cp for $189.00 shipped off ebay then at the same time I ordered the bird I ordered parts from rc 711 like head parts blades main shafts main gears you can get the main gears and also the main with the oneway bearing already in stalled it takes about a week to get the parts from china it took 4 to 5 days for the bird from ebay it is shipped fro Ca. you can request faster shipping from both places. Here is the parts link. http://www.rc711.com/shop/index.php?cPath=22_28 I hope this helps its a lot cheaper to start with than blde400 and t-rex. Fly safe have fun Always keep yout eye on the birdy Aways expect the unexpected
Posted on: 1/24/2008 10:45 AM by Author "beltcp flyer" in the forum "E-Flite Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=6961628

RE: Honeybee King v2 tuner shop
Hye i had that same problem and they would fill up with air and the bird was hard to control. I have a belt cp got my bldes from rc 711 over seas i just took a heat gun and shrank them till they were tight they are fine now the heat gun woks realy good or even a blow dryer on high heat.
Posted on: 1/24/2008 10:22 AM by Author "beltcp flyer" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=6961537

RE: LF main gear with one way bearing for BeltCP
here is a site where you can get the gear with the oneway bearing already installed http://www.rc711.com/shop/index.php?cPath=22_28&sort=2a&page=1 go to page 3 if you installing your own one way make sure its facing the correct way you can use the short piece of metal that goes with the gear set in the bearing and a socket that fits over it and the tap it in from the socket side tapping it into the gear. Hope this helps Fly safe have fun
Posted on: 1/21/2008 6:17 PM by Author "beltcp flyer" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=6946207

RE: ........."BELT-CP THREAD"........
did you put a new set of main blades on along with all the other new parts than if so I would say its not the blades, if you are new to this type bird the following info might help, check to make sure that the lock nuts are not to tight on the blade head assembly the blades should pitch snugly and smoothly by hand. Also did you make sure you have the bearing races facing the correct way should be o-ring, flat washer then blade head then race with track of washer for bearing to ride in, is facing you then bearing now put the race with the track facing the bearing then tighten lock nut you might want to start with putting a lock nut on one side of the feathering shaft and tighten it down till a very little bit of threads are showing and feed it thorough your blade head with the bearing assembly already in one blade head put the flat washer then the o-ring now push it through your head block then assembly the other blade head put on your lock nut hold the side already tightened down with some small needle nose pliers and tighten down the current side till there are a few threads showing with your 5.5 slim walled socket driver. I am sorry if you are experienced and not new to this hobby for all this info might be irrelevant to you. Fly safe have fun Always keep your eye on the birdy
Posted on: 1/20/2008 4:28 PM by Author "beltcp flyer" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=6939830

RE: ........."BELT-CP THREAD"........
I agree with slotcar check the basics mostly you blade balance had the same problem always make sure you replace blades as a set bo not mix match they are balanced as a set fro factory. you can get a good blade balancer for about 39.95 Always keep your eye on the birdy
Posted on: 1/20/2008 1:23 PM by Author "beltcp flyer" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=6938921

RE: ........."BELT-CP THREAD"........
Just for general info. if you have a head lock or head hold gyro, the switch that is on the e-sky radio called gyro switch is for when you flip the idle up, you also switch the gyro switch for head hold inverted I believe it tells you that in the manual someone correct me if I am wrong my brother has a HH gyro that came with his exceed belt cp which is also the same as the e-sky HH gyro and it holds the head position very well fatuba has the latest and graetest HH gyro but it cost around $189.00 hope this helped. Fly safe and have fun Always keep your eye on the birdy I started flying helis 16 months ago and my wallet is still empty
Posted on: 1/20/2008 1:19 PM by Author "beltcp flyer" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=6938900

RE: ........."BELT-CP THREAD"........
you can get the gear with the one way bearing installed at http://www.rc711.com/shop/index.php and if you look at the bearing at the bottom there will be an arrow eatched at the bottom face of the bearing and also wrighting at the bottom like HF0612 or something like that which is flat compared to the top face of the bearing which is slightly rounded, insert it in the gear with the bottom going in first, the bottom bearing being defined with the arrow and wrighting and flat side . You should also be able to notice that the bottom of the bearnig although it is flat faced it has more of a beval
Posted on: 1/12/2008 7:27 PM by Author "beltcp flyer" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=6896847

RE: ........."BELT-CP THREAD"........
here is a picture of switches for my stock radio hope this will help
Posted on: 1/11/2008 12:38 PM by Author "beltcp flyer" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=6890421

RE: ........."BELT-CP THREAD"........
hey take a look at this 4 yr old flying a 90 size gaser he is now 11 i think but check it out http://www.youtube.com/watch?v=tIIj27vxWjw
Posted on: 1/5/2008 11:43 AM by Author "beltcp flyer" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=6857620

RE: ........."BELT-CP THREAD"........
yea I was just thinking that same thing but that don't make any difference, so what happens when you try to hover, it justs spins have you tried adjusting the tail servo sliding it forward or backward like it shows in the manual
Posted on: 12/29/2007 12:27 PM by Author "beltcp flyer" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=6821181

RE: ........."BELT-CP THREAD"........
ok when you push the right stick forwad the swash plate should tip forward and when you pull the stick backward the swashplate should tip backward if you push to the left swashplate should tip left and right should tip right left stick should be throttle up and left yaw and right yaw it sounds to me like you have the switches wrong on the radio ok just got your message about the switches
Posted on: 12/29/2007 11:58 AM by Author "beltcp flyer" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=6821139

RE: ........."BELT-CP THREAD"........
[quote]ORIGINAL: beltcp flyer are you saying when you move the right stick foward or backward that it tips right or yaws (spins ) right also what position is your gyro reversing switch mine is in reverse I will send you a pic or the radio switches [/quote]
Posted on: 12/29/2007 11:49 AM by Author "beltcp flyer" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=6821085