RE: Details for scale A-10 canopy system
I have the instructions but I cannot tell from them how to install that servo
Posted on: 8/16/2012 3:31 PM by Author "benitez195" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11196179

Details for scale A-10 canopy system
I am looking for someone that has installed the canopy system from Details for scale for the A-10 from Mibo I am having a bit of trouble trying to figure out were to install the servo that will raise and lower the canopy if anyone has some pics that they can send me that will show how it mounts I will appreciate it alot
Posted on: 8/16/2012 2:27 PM by Author "benitez195" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11196121

RE: 1/5.5 Scale SU-34
Joe call Will 305-904-1672 his dad does this kind of work
Posted on: 2/1/2012 4:14 PM by Author "benitez195" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10939142

RE: Attention Jet Central Mammoth users
Hello George I have a Mammoth on the Flyeagle F-15 and weights 62 lbs it originally had a Rhyno and would fly it but needed lost of runway and with the Mammoth now its amazing how it flyes.I have over 10 hrs of running time on the engine and I have not had a single issue with it and power wise its amamzing at the verticle on my plane I cannot say how satisfied I am with this engine.
Posted on: 4/3/2011 6:33 AM by Author "benitez195" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10439754

RE: The new Tornado sport jet
Nice job Henry and the flights were awsome no bad habbits on the Airplane and easy layout again awsome job.
Posted on: 11/16/2010 8:15 AM by Author "benitez195" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10138576

RE: The new Tornado sport jet
Today i got to see the prototype up close and it looks very nice evething ready to drop in place even a beginner can put this one together and the workmanship is great nice work guys
Posted on: 11/4/2010 6:50 PM by Author "benitez195" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10115707

RE: It must have snowed in hell today...
I happened to own two Jetcentral engines and i would not trade or sell them for anything else very satisfied with them and if i need to speak to Eric he is always there not that i have needed him for any problems with my egines
Posted on: 10/7/2010 5:40 PM by Author "benitez195" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10054283

RE: Jet Legend Buyers Beware
Pablo my problem is not with you or the company you work for but i do have a problem with Jet Legend blaming everything on pilot error specially when the two people that you work for and 5 other very expirienced pilot were there watching the plane straight and level just crash i can asure you as well as the other pilots that were there will atest to the fact that pilot error was not the factor and also since you brought up the subject of good faith i lost $9000.00 dollars in this kit cost you $825.00 thats a big difference and we both know the reason why this was done which i wont mention it but if it wasnt becouse of that i probably would be like averyone else stuck with the same from Jet Legend.
Posted on: 3/6/2010 9:07 AM by Author "benitez195" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9558947

RE: Jet Legend Buyers Beware
Here are the pictures of whats left of my f-15 and im sorry that i could not get you anything else due to fact that the rest burned to crisp
Posted on: 3/4/2010 7:56 PM by Author "benitez195" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9555397

RE: Jet Legend Buyers Beware
Rob for your information and others like Mr Yang Zicheng the rep for our area wich is owned by 2 people were present when my flight was going on and they saw my airplane at a straight and level flight just go out of control and crashed when i pick up what was left he saw what failed in the elevator and when he notified them of the crashed there response was that its part of the hobby so apparently the only thing that JL cares about is taking our money.
Posted on: 3/3/2010 8:36 PM by Author "benitez195" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9552718

RE: Jet Legend Buyers Beware
Jeff when i contacted them their reply was that their airplanes were fine as is and were not changing anything that they were not aware of any problems but as you can see they lied because they have been contacted and have not done a thing about it
Posted on: 3/2/2010 4:34 PM by Author "benitez195" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9549154

RE: Jet Legend Buyers Beware
dubd i kept the elevator stab and i even sent them the pictures and still have sitting in my garage
Posted on: 3/1/2010 7:52 PM by Author "benitez195" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9546774

RE: Jet Legend Buyers Beware
joel i contacted them to see what they were going to do about it and i was told that its part of the hobbie and i lost everything because my airplanes was full of fuel and everything burned to a crisp
Posted on: 3/1/2010 7:51 PM by Author "benitez195" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9546769

Jet Legend Buyers Beware
Well, here we go again. Modelers losing our planes because of a manufacturers inadequate designs and structural failures. This is not the first time for Jet Legend. I had their new large F-15B with a new Jet Cat 160. On the fifth flight, a level flight at a cruise speed, one or both elevators failed causing a catastrophic crash; a complete loss of everything, turbine, radio, batteries, the whole works. What we were able to determine was there was a failure in one of the elevators. The design of the internal structure is weak and is very inadequate. Not only a poor design but the glue did not stick to the metal tube spar and the pins that hold the spar from rotating inside the elevator stabs were missing. I contacted Jet Legend to let them know in hopes of recuperating something, as this was completely their fault. Bottom line is that they don’t care nor would admit to their failures. Just recently a friend of mine lost his Jet Legend L-39 from the wing folding in-flight, obviously, another design problem. It is time we modelers stop buying products from Jet Legend. We are throwing away thousands of our dollars, because they don’t want to spend their time and money on proper Research and Development. Many people will lose their jets because of inadequate designs from companies like Jet Legend, and be willing to accept the fact that “things can happen.� Well, failures don’t just happen from companies that spend the time to research a product and it's quality. In my opinion, based observations of mine and my friends L-39, you are taking a chance with Jet Legend. Well, it is time we say, no more to Jet Legend. Jet Legends doesn't have what it takes to consistently produce products that won’t fail and back up their product when someone looses everything due to their structural failures. We work hard for our money and we don’t need to waste it on junk. Don’t let them take your money so that someday you won't have to say, I wish I had listened to the warning about Jet Legend.
Posted on: 3/1/2010 5:39 PM by Author "benitez195" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9546375

RE: Bad news I'm afraid
R.I.P Johnny you will be missed by many and our thoughts and prayers are with your family
Posted on: 11/26/2009 5:04 PM by Author "benitez195" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9283158

weatronics troubleshoot
Does anyone know how to set up the weatronics 12-20R (THAT DOESNT HAVE A GYRO INTERNALLY) with and external gyro. I cant seem to figure it out.
Posted on: 8/2/2008 7:06 PM by Author "benitez195" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7801135

skymaster f-15 struts
Does anyone know where i can get a set of main gear struts for a skymaster f-15. Eric the rep is out of the country and i was wondering if there is anyone else i can talk to.
Posted on: 9/22/2007 5:40 PM by Author "benitez195" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6401009

Mibo A-10 Gen 3 Manual or pics??
I ordered and recieved a Mibo A-10 Generation 3 and needed to see if anyone has pictures or some kind of manual to aid me in the building of this aircraft. It did not come with any reference pictures or a manual. I have the composite version. No wood. Any help would be appreciated. Thanks
Posted on: 9/22/2007 11:51 AM by Author "benitez195" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6399975