|
RE: Best type of car for grass
It appears that the inner and outer foam air filters are not installed. Do I need to put oil on both of the inner and outer foam pieces? And how much oil do I put on the foam? Thank you, Bjfrankl
Posted on: 9/17/2012 3:25 PM by Author "bjfrankl"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=11231541
RE: Best type of car for grass
Do I need to put air fliter oil on the foam filter before I run the car for the first time, or has this already been done at the factory? Thank you, Bjfrankl
Posted on: 9/15/2012 5:34 PM by Author "bjfrankl"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=11229631
RE: Best type of car for grass
I almost ordered a Savage, but I liked the Hyper 7's price, escpecially since this is my first rc car. I'm still second-guessing myself because it was a hard decision. I'm sure that I will buy a monstor truck at some point. Any advice for running my Hyper 7 for the first time? For example, breaking in the engine, the best fuel to use, etc.? Bjfrankl
Posted on: 9/13/2012 7:44 PM by Author "bjfrankl"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=11227881
RE: Best type of car for grass
, and this was my first nitro car so I didn't want to spend more than $300-400. Bjfrankl
Posted on: 9/12/2012 7:32 PM by Author "bjfrankl"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=11226783
RE: Best type of car for grass
is a monster truck because of its high clearance. Bjfrankl
Posted on: 9/10/2012 9:13 PM by Author "bjfrankl"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=11224577
RE: Best type of car for grass
, but this will be my first nitro rc car. Thank you, Bjfrankl
Posted on: 9/10/2012 10:45 AM by Author "bjfrankl"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=11223873
Best type of car for grass
Hello - What is the best type of car for handling grass? Will an 1/8 scale buggy handle the grass? Or should I be looking for a stadium truck or monstor truck for more ground clearance. I am thinking about purchasing a Hyper 7, but I want to be sure that it will handle the grass okay before I buy it. Thank you, Bjfrankl
Posted on: 9/9/2012 11:38 AM by Author "bjfrankl"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=11222848
Nitro Boats
Hello - I owned a couple of nitro boats a fews years ago but sold them because I got into rc airplanes. I've thought about buying another nitro rc boat, but it looks like Horizon Hobby no longer offers nitro boats on its webiste. I know Tower Hobbies offers nitro boats, but I am curios to know why Horizon Hobby does not. Any thoughts? Thank you, Bjfrankl
Posted on: 6/30/2012 11:03 AM by Author "bjfrankl"
in the forum "RC Boats General Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=11137731
Plane for Evolution 36 Control Line Engine
Hello - I have an Evolution 36 Control Line engine, and I am looking for a plane for this engine. Any suggestions? Bjfrankl
Posted on: 5/13/2012 11:31 AM by Author "bjfrankl"
in the forum "Control Lines"
http://www.rcuniverse.com/forum/fb.asp?m=11079260
RE: First Nitro RC
Thank you for all of the replies. I am going to purchase either the Traxxas Rustler or the Hyper 7. Bjfrankl
Posted on: 4/18/2012 8:49 PM by Author "bjfrankl"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=11048033
RE: First Nitro RC
, and he seems to like it. Bjfrankl
Posted on: 4/17/2012 10:16 AM by Author "bjfrankl"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=11045783
First Nitro RC
Hello - I currently fly rc airplanes and am intersted in purchasing my first nitro rc car. I would like a car that can handle grass, dirt, and paved roads. Any suggestions? So far I have been looking into the following: HPI Racing RS4 MT2 G 3.0 HPI Racing 1/10 10T 2WD Traxxas Rustler Thank you, Bjfrankl
Posted on: 4/16/2012 8:40 PM by Author "bjfrankl"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=11045116
RE: im new here just flew my first CL in 30 years!
, but I have always wanted to try control line. Bjfrankl
Posted on: 9/12/2011 8:08 PM by Author "bjfrankl"
in the forum "Control Lines"
http://www.rcuniverse.com/forum/fb.asp?m=10713858
.049 Engine
I currently fly a Brodak .049 engine (which runs very well), but I am curious if there are other companies out there manufacturing .049 engines?? Bjfrankl
Posted on: 9/11/2011 5:18 PM by Author "bjfrankl"
in the forum "Control Lines"
http://www.rcuniverse.com/forum/fb.asp?m=10711900
Fuel Tank Setup
was getting enough fuel. Thanks, Bjfrankl
Posted on: 8/20/2011 6:23 PM by Author "bjfrankl"
in the forum "Control Lines"
http://www.rcuniverse.com/forum/fb.asp?m=10679359
RE: Brodak Baby Clown ARF Landing Gear
I figured the landing gear out. The piece of wood goes into the slot to hold the landing gear in place. I used a few drops of CA to hold it. I fly RC planes, so this is my first control line plane. I am going to a nearby club on Tuesday to get some help with flying the plane. Thanks for all the input. Bjfrankl
Posted on: 8/18/2011 7:28 PM by Author "bjfrankl"
in the forum "Control Lines"
http://www.rcuniverse.com/forum/fb.asp?m=10676864
RE: Brodak Baby Clown ARF Landing Gear
Thank you for the reply. My instructions say to insert a wood collar onto the landing gear before inserting the landing gear into the slot in the fuselage. The slot appears to be too big for just inserting the landing gear into the fuselage. There is a small piece of wood, but it doesn't look like a collar. Bjfrankl
Posted on: 8/9/2011 7:39 PM by Author "bjfrankl"
in the forum "Control Lines"
http://www.rcuniverse.com/forum/fb.asp?m=10663536
RE: Brodak Baby Clown ARF Landing Gear
It is the current version.
Posted on: 8/7/2011 8:08 PM by Author "bjfrankl"
in the forum "Control Lines"
http://www.rcuniverse.com/forum/fb.asp?m=10660377
Brodak Baby Clown ARF Landing Gear
Hello- Is anyone familiar with the landing gear installtion on the Brodak Baby Clown ARF? After reading the instructions, I am unsure how to mount the landing gear to the fuselage. Thanks Bjfrankl
Posted on: 8/6/2011 9:10 PM by Author "bjfrankl"
in the forum "Control Lines"
http://www.rcuniverse.com/forum/fb.asp?m=10658980
Converting Trainer to Taildragger
Hello- I am going to convert my Avistar 40 to a taildragger, but I have some questions since I have not done this before: 1. How far forward/back should I mount the main landing gear? 2. What type of wood should I use for the main landing gear's mounting block inside of the fuselage? I have 1/8" plywood. Would that work? Thank you, Bjfrankl
Posted on: 6/14/2011 10:28 AM by Author "bjfrankl"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=10573624
Fuel Leak inside Escapade Fuselage
the the wood dry? Thanks Bjfrankl
Posted on: 4/8/2011 6:26 PM by Author "bjfrankl"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=10451913
RE: Rustler in the grass
new to the rc car scene. Bjfrankl
Posted on: 3/20/2011 9:13 PM by Author "bjfrankl"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10412951
RE: Rustler in the grass
I bought the electric brushed version today, but I am going to return it because I think that I will get bored with it. I haven't decided if I am going to get the nitro version yet or not. Bjfrankl
Posted on: 3/20/2011 7:33 PM by Author "bjfrankl"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10412751
Receiver location for Parkzone Stryker
Does anyone have any pics of their receiver setup in the Parkzone Stryker? I purchased the PNP version, and I am not sure where or how I should position my Spektrum AR6200 receiver in the jet. Thanks, Bjfrankl
Posted on: 3/19/2011 9:38 PM by Author "bjfrankl"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=10410868
Rustler in the grass
Hello- I am about ready to purchase Traxxas Nitro Rustler, but I want to be sure that this vehicle will perform well in grass. I will be running this vehicle mostly on grass. Bjfrankl
Posted on: 3/19/2011 5:47 PM by Author "bjfrankl"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10410493
Traxxas Nitro Sport or Traxxas Nitro Rustler
I have narrowed down my choice for a first nitro vehicle to a Traxxas Nitro Sport or a Traxxas Rustler. Any feedback on which car I should go with? Bjfrankl
Posted on: 3/13/2011 7:42 PM by Author "bjfrankl"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10398142
RE: What plane should I get? Tired of foamies!
a nitro plane. I would not recommend that you attempt to fly the plane on your own. Bjfrankl
Posted on: 3/9/2011 7:56 PM by Author "bjfrankl"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=10390130
RE: First Nitro Car
nearby. Bjfrankl
Posted on: 3/7/2011 9:10 PM by Author "bjfrankl"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10385935
First Nitro Car
Hello- I currently fly nitro rc airplanes, and I am thinking of getting a nitro car. Any suggestions for a good first nitro car? I would like something that I can run on different surfaces (grass, dirt, pavement,, etc.). Bjfrankl
Posted on: 3/5/2011 1:11 PM by Author "bjfrankl"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10380803
RE: Warped Vertical Fin
the fuselage. Bjfrankl
Posted on: 2/4/2011 4:28 PM by Author "bjfrankl"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=10312831
| 
