RE: DLE-30 and the new baby planes
Tom what will the new colour schemes be and how can i get one of these in australia?
Posted on: 9/7/2009 8:27 PM by Author "bjnginge" in the forum "WildHare R/C Support"
http://www.rcuniverse.com/forum/fb.asp?m=9077131

RE: NEW DLE30!
Wow thos are good numbers.My 43cc only spins a 20x8 at 7000. My dle30 is ordered and on they way[:D].This engine should pull the c&@p out of a 70 inch plane[>:]
Posted on: 8/21/2009 1:10 AM by Author "bjnginge" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9032764

RE: NEW SYSSA 30CC GASSER MADE IN THE USA
Hi there,i wanted to ask if these will have a choke because i have a 26CC rear induction of another brand without a choke.Its a real pain because you have to take the hatch off and choke it with your finger every time
Posted on: 6/23/2009 11:32 AM by Author "bjnginge" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8872891

RE: Cermark SS-77, Scale Series 77
I just bought one of these to go with a spe 43 i had.I could only get the blue colour from peakmodel.hopfully should be here next week.How well do they fly with the spe?
Posted on: 6/3/2009 11:07 PM by Author "bjnginge" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=8823971

RE: mugi evo motor information need ?
G'day,i fist used a TowerPro Brushless Outrunner 2408-21 and it flew well but need more speed, then swapped to a turnigy HXT 2835 (380S) 2700kv Brushless Inrunner and now the thing is @#$%*&^ quick.I love it
Posted on: 5/22/2009 8:33 AM by Author "bjnginge" in the forum "Electric General Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=8789639

RE: One Tough FFF Delta...Build It!
thanks,i built it out of 3mm corro and it seams hard to balance,might have to try and get some 2mm.
Posted on: 4/12/2009 10:13 PM by Author "bjnginge" in the forum "Foamies! - RC Electric Foam Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=8675281

RE: One Tough FFF Delta...Build It!
This post is old i know but i just stumbled into one of these.Is anyone still building any?My question is i have a brushless inrunner on its way,it weighs 100 grams,am i going to have trouble with cog and should i mount the motor further forward and slot the wing.Bye the way it is made out of corroplast.
Posted on: 4/10/2009 8:53 AM by Author "bjnginge" in the forum "Foamies! - RC Electric Foam Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=8667191

RE: Peakmodel Extra 260 25%
So far i have thrashed my extra with a peak 26,very agressive flying and i have only damaged it from a dead stick landing (my fault ).i have added bracing and some epoxy from day one to make sure it was a bit tougher.So after about a few hundred flights i through the spe43 in it (nearly the same weight). Will get to fly again in a few weeks and hope to thrash it for another 100 flights.By the way i have a wild hare yak with a dl50 in it and the extra is still fun to fly!
Posted on: 8/1/2008 7:36 AM by Author "bjnginge" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=7795761

RE: CG QUESTION ON WILDHARE YAK
Thanks for your help tom
Posted on: 6/18/2008 5:54 AM by Author "bjnginge" in the forum "WildHare R/C Support"
http://www.rcuniverse.com/forum/fb.asp?m=7632387

CG QUESTION ON WILDHARE YAK
G'day i am finishing the build on my wildhare yak and the instructions say balance at 3.25 inches back from the leading edge at wingtip.Is ther any reason for this as all my other planes are measured next to the fuse.[8|]Also shold it be measured inverted or does it not matter with the wing type.Thanks fellas [;)]
Posted on: 6/17/2008 5:57 AM by Author "bjnginge" in the forum "WildHare R/C Support"
http://www.rcuniverse.com/forum/fb.asp?m=7628171

RE: Pick for Chinese 26cc Engine?
G'day i've got a peak26 and its a sweet little gasser,turns a 17x8 at 7600.put about 2 gallons (converted that in my head for the unmetric ) thru it and i couldn't be happier.It prop hangs the 72 inch extra at half throttle and pulls out vertically.a few older members at my club cant stop saying how good it pulls,all the us engines we get here are to heavy or over priced.
Posted on: 4/6/2008 10:45 AM by Author "bjnginge" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=7340718

RE: Help with 50cc misfire/pop and flame out
I think it could be a combination of ignition problem(ignition module,plug lead etc)and failsafe.in the video when it pops on the ground the carb tuning sounds ok but it really fights itself like its firing to early with spark timing.
Posted on: 4/6/2008 8:46 AM by Author "bjnginge" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=7340358

SPE40 & DL50 vibration tests
Has anyone compared the vibration levels of a SPE40 and DL50?I'm curious if they are about the same or is one better than the other?[8|]
Posted on: 10/21/2007 7:06 AM by Author "bjnginge" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=6518229

what size plane for my 26cc gasser?
Ive got my self a peak 26cc gasser with a weight of about 1050grams,would this fit a 120 size arf or would i have to go bigger say 160 size.can anyone help as im new to gas[:o]
Posted on: 10/12/2007 9:38 PM by Author "bjnginge" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=6483453

saito or 26cc gasser in my chippy
I just bought a peak 26 and was going to buy a 120 size plane to put it in,but then i looked at my wm 90s chippy[>:]it already has a saito 91 in it but i would like to go gas,so what do u think to big?
Posted on: 10/11/2007 4:50 AM by Author "bjnginge" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=6476307

RE: Best 23cc-26cc engine for Goldberg Sukhoi?
peak models do a peak 26cc with a rear mounted carb,they recon it makes more power than a spe26.i just got one,will test run it tomorrow mabey.i just dont know what to put it in[8|]
Posted on: 10/10/2007 6:05 AM by Author "bjnginge" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=6472388

RE: SPE 40cc Problems
[quote]ORIGINAL: Ozmodeller Guys Anyone had experience with the following with this engine: Turning over by hand a notchy feeling as the piston comes to TDC, Looking through the spark plug hole and it appears that the piston is hitting the combustion chamber, Some scoring on the piston on either side of the exhaust port, and the engine is brand new! Thanks in advance Peter [/quote] I had the same problem with mine,i sent it back and received a new one.so far so good,i haven't started it yet.
Posted on: 10/8/2007 7:11 AM by Author "bjnginge" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=6463445

Thanks peakmodel
Just want to say thanks to peakmodel,i bought a spe40 that was faulty (the piston was hitting the head).they have gone out of there way to help me and pay the postage back as well.very happy thanks[:D]
Posted on: 9/30/2007 5:25 AM by Author "bjnginge" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=6430810

RE: new engine stuffed.thanks peakmodel!
Update on the spe40.Way from peakmodel has been very good.He has answered my problems quickly they are sending me out another spe40 and are going to cover the cost of transport as well.I think this is great as most companies would not do that.thanks peakmodel.
Posted on: 9/30/2007 5:16 AM by Author "bjnginge" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=6430797

RE: new engine stuffed.thanks peakmodel!
Thanks for the info craig.im still trying to get a replacement first as i dont think you should have to mod a brand new engine.i will see what happens first with peak and go from there[;)]
Posted on: 9/27/2007 4:45 AM by Author "bjnginge" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=6419434

RE: new engine stuffed.thanks peakmodel!
It's a spe40,with the plug out it seams that the piston is hitting the head.They say if i buy another engine(was looking at a peak26)then they will take the shipping price of sending it back off the price of the 26.i dont know if i want another engine yet[8|]what do you guys think,a peak26 or the spe26?or should i try some thicker gasket under the barrel
Posted on: 9/27/2007 12:38 AM by Author "bjnginge" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=6419100

new engine stuffed.thanks peakmodel!
G'day all just opened the box from peakmodel,my first gasser so excited then sad.While checking it over i found that it wont turn over by hand.It seems that the piston is hitting the head.when i informed peakmodel the response was for ME to dissasemble the engine,and repair.i dont know how to fix this but i would say STAY AWAY FROM PEAKMODEL.guess i will have to try to fix this pile of s**t.[&o]
Posted on: 9/26/2007 7:06 AM by Author "bjnginge" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=6415302

Ace servos,any good?
G'day i'm looking at buying some servos for my 25% extra and would love to know if they are any good.They are 1313 digital coreless.thinking of using them on all surfaces.what do u think?[8|]
Posted on: 9/25/2007 7:02 AM by Author "bjnginge" in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=6411077

RE: SPE 40cc
I'm reading with intrest roy as my spe should be here this week.[:D]sounds like this engine will need a good run in and tune,keep us posted on your progress mate.Also how does she fly mate?
Posted on: 9/22/2007 7:08 AM by Author "bjnginge" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=6399392

RE: Peakmodel Extra 260 25%
i agree nitro is like liquid gold here[:(]
Posted on: 8/30/2007 6:32 AM by Author "bjnginge" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=6305937

RE: Peakmodel Extra 260 25%
ordered mine last night but they are all out of spe 40cc engines[&o]so i'll have to wait about 4 weeks aparently for the factory to supply more[:o]oh well i guess it will give me time to get servos and start the build.by the way what are you using for servos,i was thinking of going hitec metal gears.
Posted on: 8/30/2007 2:08 AM by Author "bjnginge" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=6305613

RE: Peakmodel Extra 260 25%
It's great reading your posts fellas,I,ve got the go ahead from the other half so i,ll order mine tonight[:D]I would love to see some pictures especialiy the two elevator servos
Posted on: 8/29/2007 5:15 AM by Author "bjnginge" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=6301500

RE: Peakmodel Extra 260 25%
im still not sure which engine to go for!! i want to order but cant decide weather the 26CC will be enough or should i go for the 40CC and cope with the extra weight?how would the wing loading be?can anybody help me choose[:o]
Posted on: 8/26/2007 6:01 AM by Author "bjnginge" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=6287914

RE: Peakmodel Extra 260 25%
i think ill go for the 40cc it isnt that much more weight,hopefully cg wont be a prob.besides more power is always a good thing
Posted on: 8/25/2007 6:50 AM by Author "bjnginge" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=6284388

RE: Peakmodel Extra 260 25%
that the peak makes a bit better power is this true?im a bit confused about which engine to go for the SPE 26 or the PEAK 26. does anybody know the difference and which is better.i head somewhere
Posted on: 8/25/2007 6:11 AM by Author "bjnginge" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=6284346