RE: HELP needed motor question
The new CEN motors are by Corsa. http://www.rev-line.com/28engine.html
Posted on: 6/29/2009 2:44 PM by Author "cablek" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=8891254

RE: gst shock caps keep popping off
Try using some teflon plumbers tape on the threads.
Posted on: 4/29/2009 8:31 AM by Author "cablek" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=8725276

Full Assembly Manual
Does anyone out there know if a full assembly manual exists for the MGT 8.0? I have the exploded view and the standard manual, but neither has step by step instructions. I completly tore down my truck and I am needing a little help putting it back together. Thanks!
Posted on: 3/17/2009 10:05 AM by Author "cablek" in the forum "Team Associated - Monster GT"
http://www.rcuniverse.com/forum/fb.asp?m=8586968

RE: GST 7.7 NOT MADE TO RUN, BUT NICE TO LOOK AT!!!
I doubt it. However, I own both trucks so I can check for you tonight.
Posted on: 2/19/2009 1:07 PM by Author "cablek" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=8494893

RE: My gst 7.7 won't shift
The link that you posted says to set the LSN at 2.5 in from flush. Is this correct? I have seen other documents that say from flush to 1 turn out. Can anyone out there definitivly say which setting is correct? Thanks Keith
Posted on: 1/29/2009 7:46 PM by Author "cablek" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=8417014

RE: help
Does anyone have a recomendation on where to find 500k fluid?
Posted on: 1/22/2009 12:36 PM by Author "cablek" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=8388012

RE: Motor Swaps
Has anyone out there put a .28 in a CT5? I have seen the videos so I know that it can be done. I am just curious about the exhaust header and whether the motor mounts needed to be modded. Any advice will be much appreciated! Keith Cable
Posted on: 1/5/2009 4:27 PM by Author "cablek" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=8322157

RE: I want to make a twin engined GST 7.7
Ebay...
Posted on: 12/16/2008 4:14 PM by Author "cablek" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=8252286

RE: Motor Swaps
Very cool! What motor mount did you use? Did it require any modding? Thanks...
Posted on: 10/23/2008 11:26 AM by Author "cablek" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=8077292

Motor Swaps
I have a few questions that I was hoping the "brain trust" could help me with. 1. I bought a Corsa 5.0 off ebay. For some reason I had it in my head that this the new motor for the GST7.7. I was wrong. So now that I'm stuck with it, I think that I am going to install it in my Matrix Arena TR. Will it just drop in? 2. Assuming that the Corsa 5.0 will work in my Matrix Arena, can I use my SH28 in my CT5? If so, will it just drop in? Thanks in advance for any advice you may be able to provide. Keith Cable
Posted on: 10/23/2008 9:07 AM by Author "cablek" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=8073395

RE: IV Ti has gone bonkers
It could also be a bad gyro or broken solder joint. You could try hitting all of the solder joints with a little heat from a soldering iron. If that does not work Mike from spectrolutions will fix it for a $50 flat fee. http://www.spectrolutions.com/ Keith Cable
Posted on: 10/10/2008 8:40 AM by Author "cablek" in the forum "Draganfly Innovations Products"
http://www.rcuniverse.com/forum/fb.asp?m=8035847

RE: Electronics help
They filter out the RF noise created by the motors. Without them you risk a serious crash caused by the interference. I would not fly the DF with even the smallest crack! They are too cheap to risk a crash by not using them.
Posted on: 9/22/2008 12:17 PM by Author "cablek" in the forum "Draganfly Innovations Products"
http://www.rcuniverse.com/forum/fb.asp?m=7979235

RE: New TI-V owner
What simulator are you using?
Posted on: 9/8/2008 2:41 PM by Author "cablek" in the forum "Draganfly Innovations Products"
http://www.rcuniverse.com/forum/fb.asp?m=7933215

CT-5 Transmission
My Ct-5 is all of a sudden running like its stuck in second. It is very sluggish. In fact it barly rolls until the motor is winding out. Any good tutorials on rebulding the tranny out there? Should the first and second spur gear spin independantly or should they be locked together? Thanks...
Posted on: 9/2/2008 12:03 PM by Author "cablek" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=7911797

RE: GST 7.7 shifting (WOULD LIKE RESPONSE FROM CEN)
For the record I have reached out to Alex twice looking for some transmission advice. He has ignored my email both times.
Posted on: 7/2/2008 1:48 PM by Author "cablek" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=7686144

RE: GST 3rd gear clutch mod
I second that!
Posted on: 5/21/2008 5:11 PM by Author "cablek" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=7524429

RE: got my ofna primer pump today
That would be awesome!!!!!
Posted on: 5/8/2008 8:57 AM by Author "cablek" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=7470780

RE: ERROR ON CEN SITE
I pointed out the same issue with the GST document, to CEN, a few months ago. My engine seems to run best with the LSN closer to flush. Does anyone out there think that this is too lean?
Posted on: 5/7/2008 3:30 PM by Author "cablek" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=7467731

RE: got my ofna primer pump today
How do you take the stone out?
Posted on: 5/7/2008 2:31 PM by Author "cablek" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=7467457

What diff fluid to use?
I have read some post that refer to using Kyosho 500K diff fluid for the center diff. Can anyone confirm if the following link is the correct fluid? [link]http://www.shopkyosho.com/product/part_number=SIL500000/410.0.25387.25439.0.0.0[/link]
Posted on: 5/5/2008 5:13 PM by Author "cablek" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=7459335

RE: Default position for 2nd and 3rd gear adjustment screws
Now I get it. I'm an idiot. Now that I have totally screwed up the set screws, Any suggestions for getting them back to where they need to be with out pulling the tranny and clutch?
Posted on: 5/2/2008 1:28 PM by Author "cablek" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=7448062

RE: Default position for 2nd and 3rd gear adjustment screws
no need to apologize. I feel like at one time the CEN shift adjustment document had the default positions. however it currently does not. maybe CEN can shed some light.
Posted on: 5/2/2008 11:41 AM by Author "cablek" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=7447702

RE: Default position for 2nd and 3rd gear adjustment screws
Are you refering to full turns or 1/8 turns? If you are refering to full turns, I don't think that is correct. The scews are binding on the housing at around 3 full turns.
Posted on: 5/2/2008 11:27 AM by Author "cablek" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=7447646

Default position for 2nd and 3rd gear adjustment screws
Can anyone out there suggest a good starting point for the 2nd and 3rd gear adjustment scews? I called CEN and the tech said that 2nd should be 2.5 turns out from bottom and 3rd should be 3.5. This cant be right because this causes the screws to bind on the housing. I'm hoping to revert the shift points without pulling the tranny. Thanks...
Posted on: 5/1/2008 8:33 PM by Author "cablek" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=7445530

RE: GST 7.7 NOT MADE TO RUN, BUT NICE TO LOOK AT!!!
If he spent half as much time trying to find a solution as he spent complaining about the problem, I have a feeling that he would love the GST as much as the rest of us. Jamie, next time you have an issue try asking for help instead of instantly talking smack about the truck and the forum. "You get more flys with honey than with vinegar."
Posted on: 4/30/2008 3:24 PM by Author "cablek" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=7419204

#3 or #5 glow plugs
I just recieved some CEN #3 glow plugs that I ordered off of Ebay. I have been using #5's till now. What's the difference? Can I use a #3 in a GST 7.7, Matrix TR or a CT5?
Posted on: 4/25/2008 2:39 PM by Author "cablek" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=7418748

RE: GST roll cage....
I have this same roll cage. I have yet to be able to even scratch it. In my opinion it has ths most bang for the buck.
Posted on: 3/25/2008 3:59 PM by Author "cablek" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=7280963

RE: To Roto Start Or Not To Roto Start...
That's the way I am leaning.
Posted on: 3/19/2008 10:11 AM by Author "cablek" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=7248692

To Roto Start Or Not To Roto Start...
I have installed the roto start and I'm not sure if I like it. It seems to me that it would be easier to just to keep the pull starter on. I hate having to lug that thing around. On top of that, it started to smoke the last time I used it. It now does not have enough power to turn the engine over. I'm fairly sure that the device was defective I only used it twice and did not crank on the motor very long. I'm toying with just putting the pull start back on. Any thoughts?
Posted on: 3/19/2008 10:02 AM by Author "cablek" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=7248665

RE: Help a newbie tune his GST 7.7
Mine just arrived yesterday. I plan on installing it over the weekend. Will I need to lean both the low and high speed mixture?
Posted on: 3/13/2008 3:13 PM by Author "cablek" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=7219176