|
RE: C-ARF Ultra Flash build Thread + Video
Some of my Ultra Flash pics;
Posted on: 7/16/2011 8:36 PM by Author "canenr"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10624126
RE: C-ARF Ultra Flash build Thread + Video
Need some advice? Where did you guys install and mount your airtanks(retracts and brakes)? Need some ideas.
Posted on: 7/15/2011 10:47 PM by Author "canenr"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10623408
RE: C-ARF Ultra Flash build Thread + Video
Thanks for the return feedback. Again thank you.
Posted on: 6/17/2011 11:15 PM by Author "canenr"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10579871
RE: C-ARF Ultra Flash build Thread + Video
Hi guys, anyone installed or installing the strut(landing gear) covers or fibreglass leg covers(between the wheel well and retract mount) in the wings. Any problems flying the UF without any of the two?
Posted on: 6/12/2011 9:49 PM by Author "canenr"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10570727
RE: C-ARF Ultra Flash build Thread + Video
I find attaching the bellmouth to the pipe with screws, not a clean install . Any you guys attaching the bellmouth to the pipe with pop rivets? If so Aluminum or Stainless pop rivets? And what size you using?
Posted on: 6/10/2011 3:01 PM by Author "canenr"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10567146
RE: ANYOPNE KNOW HOW TO GET IN TOUCH WITH GREAT NORTHERN MODELS?
Call Dreamworks.
Posted on: 5/30/2011 8:05 PM by Author "canenr"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10549143
RE: C-ARF Ultra Flash build Thread + Video
I thought the packers were used under the fuse fuel tank only for proper position of the tank mount. And were not used on final assembly to allow fuel tank to expand if needed. Thats a just a guess on my part. Thanks on the quick reply. I will wash out the tanks with kero and then assemble. I will try to post some pics of the Prolink landing gear.
Posted on: 5/27/2011 9:35 PM by Author "canenr"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10544365
RE: C-ARF Ultra Flash build Thread + Video
Dreamworks Prolink retracts and struts work and look great, but require some work to the airframe for perfect fit. Just retract mount needed trimming, everything else fit perfect.
Posted on: 5/27/2011 8:30 PM by Author "canenr"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10544283
RE: C-ARF Ultra Flash build Thread + Video
Has anyone wash out the fuel tanks(give them a cleaning) before assembly? I washed them out(fuse and wing tanks) with mild soap and water, and the tanks will not dry out, its been almost a week. I don't want to assemble them till all moisture is gone. Its the last thing to be done before first fire up. Also do the packers stay under the fuse fuel tank on final assembly?
Posted on: 5/27/2011 8:24 PM by Author "canenr"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10544273
RE: C-ARF Ultra Flash build Thread + Video
Thank you, for the quick feedback guys I also checked the earlier forum postings on the same subject I am dealing with, and found some answers to my questions.
Posted on: 5/14/2011 9:50 PM by Author "canenr"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10520536
RE: C-ARF Ultra Flash build Thread + Video
Another question, my inner tailpipe is 13mm(CARF is recommending 6-8mm which I can't see it happening) from the outer pipe at the tailcone. the outer pipe is about 1-2mm from the tailcone(fibreglass end). Bellmouth to inner pipe is mounted to a minimum(CARF recommends starting at 10mm and then adjust). the outter edge of the bellmouth is flush with bulkhead F6. I can"t see it getting the gap closer. Hows everyones setup or is it me?
Posted on: 5/14/2011 9:37 AM by Author "canenr"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10519354
RE: C-ARF Ultra Flash build Thread + Video
Installing a Jetcat P160sx, I notice I'm not requiring any engine spacers(CARF recommends 5mm spacer for Jetcat engines), looking thru center of tail pipe at turbine it looks centered. Anyone having to do the same? Also the manual shows using packers between fuel tank(fuse) and front fuel tank support while assembling(building), would the packers be used on final assembly?
Posted on: 5/14/2011 7:42 AM by Author "canenr"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10519197
RE: C-ARF Ultra Flash build Thread + Video
That's the Italian version
Posted on: 3/25/2011 6:44 PM by Author "canenr"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10422944
Painting your jet?
What is the best way or what do most of you guys do when painting(or appling primer) your jet? Is it easier, or does it matter to paint the jet assembled(flaps, elevators, gear doors, hatch, etc.) or just paint(or prime) all parts separately and then assemble the aircraft. Concerned that all movable parts(elevators, rudder, gear doors, etc) will stick or no come apart after the paint(or pimer) is cured. Just looking for some advice. Thank you.
Posted on: 3/21/2011 10:16 PM by Author "canenr"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10415093
RE: C-ARF Ultra Flash build Thread + Video
Need to confirm on tire size that everyone is using in their Utra Flash. Best tire size for mains and nose?
Posted on: 3/10/2011 9:54 PM by Author "canenr"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10392520
RE: Yellow Twin 18 Build
Great work. The carbon layout in the fuse is that done at the factory(does it come that way?) or was it done by the builder? Enrico
Posted on: 2/26/2011 9:55 AM by Author "canenr"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10365167
RE: C-ARF Ultra Flash build Thread + Video
Your riite Dave. Sorry, worked late yesterday. should double check before opening my mouth.
Posted on: 2/17/2011 5:09 AM by Author "canenr"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10342393
RE: C-ARF Ultra Flash build Thread + Video
Ron v U, great install. On the third picture, the tail shot I was wondering what is the white patch(fibreglass) in the servo holes? I see you got JR8711 servos in the tail(elevators)? And are you using the wing tank(plus fuse tank) with the P160sx?
Posted on: 2/16/2011 4:36 PM by Author "canenr"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10341311
RE: C-ARF Ultra Flash build Thread + Video
It seems to me a little of both(height and heading). Don't get me wrong its a impressive flying machine. Also fast, thats why I'm wondering about the business end(powerplant) of the aircraft. I'm installing a JC Cheetah in mine, just wondering what he has? Check it out, its on Speedword/DesertStorm Rollcall forum on RCU. Would like to know what he thinks of the Ultra Flash, his comments?
Posted on: 2/11/2011 10:05 AM by Author "canenr"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10328524
RE: C-ARF Ultra Flash build Thread + Video
Just watched a video of Shui flying his Ultra Flash at Speedworld/DesertStorm Fun Fly. Anyone know what Shui has for power in his UF? Whats he have for equipment in that thing? Also it looked like on the video that the UF was having a hard time maintaining a knife edge. I know its not Shui.
Posted on: 2/11/2011 9:30 AM by Author "canenr"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10328462
RE: C-ARF Ultra Flash build Thread + Video
"tahfiet" real nice install and cograts on your first flight with your Ultra Flash. Quick question if I may ask. What type of retract and landing strut with wheels are you using? It looks very sturdy. Thanks,
Posted on: 2/10/2011 10:12 PM by Author "canenr"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10327708
RE: C-ARF Ultra Flash build Thread + Video
That was my second choice in colour scheme. Looks great. Is that the original Flash wing standing in the corner?
Posted on: 1/27/2011 6:05 PM by Author "canenr"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10294110
RE: C-ARF Ultra Flash build Thread + Video
So far the plan is: Jet Central Cheetah turbine 31lbs JR8411 servos all around Dreamworks ProLink struts and wheels Futaba 12Z radio
Posted on: 1/27/2011 3:32 PM by Author "canenr"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10293668
RE: C-ARF Ultra Flash build Thread + Video
Just like my CARF Eurosport, beautiful kit. Comes with everything and excellent fit. Thank you Andy Kane.
Posted on: 1/27/2011 3:28 PM by Author "canenr"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10293656
RE: C-ARF Ultra Flash build Thread + Video
Look what showed up at my front door!
Posted on: 1/27/2011 2:17 PM by Author "canenr"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10293454
RE: C-ARF Flash Build Thread for All Flash's being built this winter
New winter project.
Posted on: 1/27/2011 2:13 PM by Author "canenr"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10293443
RE: Does anyone really build any more?
Got a NIB Synergy N9 Heli for trade.
Posted on: 1/22/2011 12:27 AM by Author "canenr"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10279740
RE: Firebird!!!
Excellent workmanship.
Posted on: 1/15/2011 6:49 AM by Author "canenr"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10264962
RE: Firebird!!!
Best Firebird thread on rcu I've seen yet. Great workmanship! Keep it coming.
Posted on: 12/30/2010 10:51 PM by Author "canenr"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10229043
RE: Firebird!!!
This is a great build on the Firebird. Very well done and detailed. Keep it coming.
Posted on: 12/29/2010 8:23 PM by Author "canenr"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10226516
| 
