brushless motor different pip sounds
hi i have a e-sky belt cp2....anyway the brushless motor when i connect it it makes a serie of short pips,unfortunetely o throwed the manual for som months ago.i know it sounds so when somthing is wrong or idle upp mode is on.but its not so. it seems to fly normally.but it doesnt sound as usual like three slowly pips.what can the problem be?
Posted on: 4/23/2009 12:38 PM by Author "carlos6501" in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=8708636

90 muffler for OS engine -2screw holes?
HI guys i am quite beginner in this with nitro.i have this 90 muffler and it comes with 2 holes and 2 screws and an extra nipple...i guess i have to put the screws in this holes or use one of them with this nipple.but what is the purpose of it?could it be to get more smoke when i put extra fuel on it? sounds silly.....for the moment i put those 2 screws.seems better so
Posted on: 4/5/2009 5:33 AM by Author "carlos6501" in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=8650037

why not usual fuel in heli motor?91sz
hi guys i have now a trx-700 with a OS91SZ engine,the question is why i cant put normal fuel 98 with ofcourse proper oil proportion and may be a little of booster for gasoline.
Posted on: 3/27/2009 2:05 PM by Author "carlos6501" in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=8622121

Spycam - Zt-802
hi guys .i buyed the Spycam - Zt-802 to make movie from my heli.but when it came home(from japan)i discover the antenna cable was falling out.and i thought .well easy to put it back...but its so little everythingi dont see the place where the antena cable was conected(solded?).does any one have an illustration of ther internal connection ?is pitty bcs it should take some minut to repare if i only knew where to connect it. by the way how good is this camera working?.i was getting very poor signal before the antenna cable was falling out of the cam.
Posted on: 1/24/2009 8:00 AM by Author "carlos6501" in the forum "RC Helicopter Heaven Support"
http://www.rcuniverse.com/forum/fb.asp?m=8394655

kinetic 50
Hi people.! i plan to buy a kinetic 50 nitro heli .i am not too experienced.but thsy look good and quite cheap. i have 2 helis of e-sky (cp and king2). well what is the opinion of this kinetic 50? .i never try gas helis before.. somthing i have to have in mind.i guess those helis are more stronger.and more careful i must be with nitro motor forces.but somthing else important i must have in mind "let the birds fly up on the skyes"
Posted on: 9/11/2008 3:34 PM by Author "carlos6501" in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=7943961

MKS GY-292 gyro how it works?
Hej guys.i have this gyro now for the honey bee king II.but this extra cable(yellow one) has to be connected in channel 5 but in what position,yellow up or down?.it seems to work almost ok.but the heli begins to spinn it doesnt feel so precisly.and when i push fully in spin direction it corrects and get headlock but i loose it after a while.must the tail rudder be in max angle to stop the rotation?or is it very small movements required to correct rotation?
Posted on: 8/2/2008 10:15 AM by Author "carlos6501" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=7799719

measuring pitch angle !
i got a nice "pice of plastic" for measuring the pitch angle of main blades.coud sombody explain me how i have to use it? it looks like i need a libell but how i know the blades are in normal flight position?..heeelp!
Posted on: 7/23/2008 1:14 PM by Author "carlos6501" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=7763333

how about SJM helis?
HI guys i am a little bit dissapointed of a E-sky king II heli and i was looking for others .and when i saw those SJM helis i really get inlove on those birds! are they really so good as they look,i mean the mechanics and structure seems to be of high quality and robust.give me some opinion guys..i am begginer and may be is bad choice.but i am looking for a more advanced,(not cheap toys)and good quality
Posted on: 7/22/2008 4:07 PM by Author "carlos6501" in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=7760066

Gyro question for E.sky king II
Ok guys my gyro seems to went broken....can it be bcs i was putting another servo?(blue one transparentvery good servo btw!).the screwing place of plastic is junk .there was no plast anymore so i couldnt see what i screw.. i was trying to fly without gyro.....seems almost imposible. what gyro to recomend me? how about head lock gyro? but what market? e-skys are good? remember i am a simple beginner...still with pampers..[:)]
Posted on: 7/21/2008 2:22 PM by Author "carlos6501" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=7755448

RE: tracking in main blades....important!
EHHH i am a beginer..[:)] this info is most for "first timers" [:D]bcs i was reading many solutions for this problem,and no "expert"tells this thing.ofcourse bcs its obvious that the tracking on blades is already done i guess[;)]well this birds are very advanced small machines and everything has to be perfect for good flying.that is what makes this hobby so interesting. without misstakes nobody learns
Posted on: 7/20/2008 4:51 PM by Author "carlos6501" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=7752223

tracking in main blades....important!
As a beginner i am ;i must spread an important discover (for me anyway) i was having problems with heli rotation and i thought i had a bad gyro or somth. wrong in tail blades but not!.(i read many people here have same problem).solution: throw the heli and buy a new!......hehe just joking! the solution is to get main blades to run .on track.then you can almost hear and feel how smooth they rotate like without resistance or vibration.then the gyro can make its work.ofcourse it can be servo placement.or other things.but check always main blades tracking. let the birds fly upp in the sky
Posted on: 7/20/2008 4:15 PM by Author "carlos6501" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=7752120

what servo for E-sky?
i was buying other kind of servo for my honey bee king II(blue transparent ones..)a little struggle to make them fit.i had to reverse the direction in the sender.and worked very good and precisely,my surprise came when i begin to give throtle and the swash plate is going down by all the three servos!!!but this i cant revers anywhere!!.is this a classic "beginers mistake"?may be i need a programable sender or reciver??.do i have to buy the e-sky shit servos again?? then is better to change heli bcs nothing on it works good seems like.
Posted on: 7/19/2008 4:50 PM by Author "carlos6501" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=7749025

RE: gyro doesnt compensate innof?
Yes i was making metal upgrade on tail and main rotor (looks very good!).and i notice that moving the tail servo forwards,helps to stop the rotation,may be is this bcs it has a tendens to glide backwards again,no matter how hard i screw it... But when i move it fowards its very litle space for the servo to move .it seems to be a very accurate position to reach the ideal point. thanks anyway for very good advices. and this "professional gyro" then is not so professional then?but it compensates for rotation movements....so i have to get head lock gyro as i see. well i didnt fly without gyro but iwas mantaining the position of heli when giving throttle...big step to fly i guess.. But big helikopters "real ones" they dont have gyro or?
Posted on: 7/19/2008 4:33 PM by Author "carlos6501" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=7748979

RE: electric motor duration/live
you are very right! i have now a 40g brushless 3900 rpm and woooow! what a piece of engeneering!.i was stupid to buy almost 4 motors(brushed)this brushless doesnt even get warm.i didnt know it could be such a tremedous difference. Well ;we all have to learn by big mistakes! i still cant fly bcs of gyro problems.but i am so happy with the new motor.that i run it to max rpm holding the heli in my hand.what and unlimited power it has wow!
Posted on: 7/19/2008 9:11 AM by Author "carlos6501" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=7747972

RE: esky hh gyro help please
i got similar problem with giro when i adjust gyro to max or min position its like the giro connection gets off.=no red light.but i screw it back some mm and it lights again.but your gyro light was still on? or... well it seems like its not high quality in this gyro .may be we have to buy some more expensive thing....suggestions??
Posted on: 7/19/2008 8:53 AM by Author "carlos6501" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=7747933

gyro doesnt compensate innof?
i have a honey bee king 2 and it allways rotates is like the gyro doesnt give inoff response to stop the rotation,the gyro is in max gain...doesnt help. it is in "rev mode" i checked normal mode too and then is totally out of control. but i can see it works when i rotate the heli by hand,then the servo moves the tail rotorbladades in right direction.i was even putting max angle in the tail blades to get more response.but still not inoff..the tail servo angle is 90 degrees as in the instructions and moves good in both directions. i have the esky "professional gyro". another question is if its possible to fly without gyro.just connectig the tail servo directly to the reciver.it seems to give more response so,but quite more difficult to mantain the direction.
Posted on: 7/19/2008 8:43 AM by Author "carlos6501" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=7747915

what pinion for brushless motor?
NOw i was buying a brushless and next problem came with what pinion to put..i have Ek5-0005 for the honey bee king 2.and silly me didnt buy a pinion in my ordering .Now the question.wich one i choose 9T 10 T or 11 T,the really question is if all fit the same shaft diameter(2,3 mm)does it have big matter?.well i know that then higher T(more pinions)then lower rotation velocity on main blades.but highter moment(you call this tourque?).the thing is that my retailer here in sweden only have 10T and he put this is for belt-CP??...well its only a general hobbyes retailer they dont know so much about what they sell. well a lot of lines for such a little detail.sorry if i make you bored guys.but we all have to be begginner some time in life
Posted on: 7/16/2008 5:05 PM by Author "carlos6501" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=7738087

RE: electric motor duration/live
thanks so much for this extended information .i apreciate that alot. i was having now my 4 motor burned.or not working any more.they just went slower and slower until they died.you think i can get live on them again?.i will try this method bcs they still work if i help them to rotate but they dont respond anymore. anyway i was buying a brushless today bcs i was thinking is no rescue possible for this motors. but i will try this method you was telling it sounds very interesting. thanks again for all good info!
Posted on: 7/16/2008 4:36 PM by Author "carlos6501" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=7738009

thanks for helping!
Ahh..thankyou for the all help i was getting guys! is nice to be here and meeting so helpfull people!
Posted on: 7/13/2008 3:46 PM by Author "carlos6501" in the forum "RC Helicopter Heaven Support"
http://www.rcuniverse.com/forum/fb.asp?m=7726337

electric motor duration/live
electric motor duration/live Hej guys.i am beginner here.well i own a honey bee king II since 2 months(i make metal upgrade..wow!) and i have a lot to learn i feel.well now to my question. why does the el-motor(not brushless)get burned or useless so quick? i think i only use it 30 or 40 min each time. is this normal? . i thought i read somewhere that i can inmerse it in a liquid....before using it first time.what liquid?.how can i make it to hold longer?. another question..do i need to put some kind lubricant in motor?
Posted on: 7/13/2008 6:26 AM by Author "carlos6501" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=7724922

el-
hi my new el-motor doesnt have so long life just some hours.gets very warm.is this normal? . i read an article about to sumerge the motor in some kind of liquid to increase its live. is that truth? what liquid? help me!
Posted on: 7/9/2008 4:32 PM by Author "carlos6501" in the forum "RC Helicopter Heaven Support"
http://www.rcuniverse.com/forum/fb.asp?m=7712134

honey bee king II reciver questions
Ok i am rookie and i just realice how lite i know.i have some question to sombody who is not as stupid as me: each channel on reciver is for controlling a certain servo.i mean channel 1=ail , 2 =elev,3= speed kontroller,4 =gyro,6=pit. the question is if i can change some channels as i want? btw..what is channel "B" for?. Are there different kinds of recivers?i mean for mode 1 or mode 2 sender. my heli doesnt behave in the same way since i buy a new rec from Japan
Posted on: 6/10/2008 3:58 PM by Author "carlos6501" in the forum "RC Helicopter Heaven Support"
http://www.rcuniverse.com/forum/fb.asp?m=7603727

reciver to e.sky king 2
i live un sweden and i had to buy a new receiver (6CH) från japan.the thing is that now the channels doesnt korrepond with i was having before!i must learn again to fly heli with this different funktions in every chanel? here i have left throtel.or can i change in the reciver what servo they controll? is it some dip switch in my sender or in the reciver to correct this?.it seems like i cant change the funktion of each channel.bcs the servos behave very different.
Posted on: 6/6/2008 12:53 PM by Author "carlos6501" in the forum "RC Helicopter Heaven Support"
http://www.rcuniverse.com/forum/fb.asp?m=7587853