|
RE: New Giant Scale Gassers for OMP this March!
I may have to come home from the Toledo show with a new Extra.
Posted on: 1/11/2009 8:33 PM by Author "carmerxr400"
in the forum "OMP - Ohio Model Products Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8347138
RE: OMP Hybrid Winter project finally done
I have a NX 22x8 on the DL. It tacked at 7300 RPM. I had the motor on a Wild hare 300 Extra to brake it in.
Posted on: 6/16/2008 6:22 PM by Author "carmerxr400"
in the forum "OMP - Ohio Model Products Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=7512338
RE: OMP Hybrid Winter project finally done
[quote]ORIGINAL: carmerxr400 I finally got my winter project done OMP Hybrid with a DL 50. I will maiden it as soon as the wind quits blowing. [/quote] The wind slowed down enough so I could put the maiden flight on my Hybrid. I had high expectations for this plane after reading all the other posts about the Hybrid. Well.......it exceeded what I was hopeing it would do. The CG was a little tail
Posted on: 5/18/2008 3:56 PM by Author "carmerxr400"
in the forum "OMP - Ohio Model Products Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=7511083
OMP Hybrid Winter project finally done
I finally got my winter project done OMP Hybrid with a DL 50. I will maiden it as soon as the wind quits blowing.
Posted on: 5/13/2008 5:29 PM by Author "carmerxr400"
in the forum "OMP - Ohio Model Products Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=7492068
RE: Lanier Extra 330 94" ARF
Well the brown truck dropped off 3 boxes today I checked it all over and my new Extra 330 shows no damage from shipping. The covering has a lot of wrinkles in it but I think they will come out. The only thing that I see that I don’t like is all of the control surface trailing edges are warped. There is not a straight one in the bunch. I put the wing tube into the wings and found a bad burr at the cut end it filed off ok. I’ll work on the trailing edges to see what I can do with them. Any suggestions would be appreciated.
Posted on: 4/2/2008 8:26 PM by Author "carmerxr400"
in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=7323983
RE: Lanier Extra 330 94" ARF
I Also jumped on the bandwagon and bought the 94" 330 .I have the 87"Extra 330 with an Evolution 58GX2 in it and that motor has lots of power I think that if the 94" comes in at 20 pounds a 58Gx would work.
Posted on: 3/30/2008 12:13 PM by Author "carmerxr400"
in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=7305605
RE: What's your favorite beater plane?
My favorite beater plane is a Kaos ARF. They fly great in the wind and land short. I have a SPAD that I will fly in just about any wind but I can't say it flys great but it flys.[:D]
Posted on: 3/4/2008 8:57 PM by Author "carmerxr400"
in the forum "Sport Flying"
http://www.rcuniverse.com/forum/fb.asp?m=7175954
RE: LANIER GIANT EXTRA 87" $299
I have been flying one for a year with an evo58 in it. Flys great I got 3rd in IMAC Basic class with it. It will 3D good also.
Posted on: 1/16/2008 9:09 PM by Author "carmerxr400"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=6919575
RE: Hybrid w/DL50 pics
How did the CG come out. I have read that the Hybrid comes out a little tail heavy with a DA-DL setup. I have the fuse all done on mine and I'm going to start on the wings this weekend. I will be putting a DL in it. How did you get to the throttle and choke linkage to hook them up.
Posted on: 12/17/2007 10:11 PM by Author "carmerxr400"
in the forum "OMP - Ohio Model Products Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=6771176
RE: *GP Giant Aeromaster $100.00 Off*
The Brown truck dropped mine GP Aeromaster off last night.[;)] I looked it over a few more wrinkles than I normally see on an ARF. I think that they will shrink out ok. Best of all no broken parts like the last 2 ARF's that I receive.
Posted on: 12/8/2007 8:28 AM by Author "carmerxr400"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=6729448
RE: Lets put my OS 46 AX on something....
I have an OS 46 on a Precision Areobatics Bad Boy at 4 pounds 10oz it pulls it great. First plane that I could tail touch[X(] Price is not bad on it at Atlantahobby. I use an APC 12.25x3.75 with a Tower Hobbies muffler
Posted on: 12/2/2007 10:05 AM by Author "carmerxr400"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=6703084
RE: Giant Aeromaster
I orderd one from Tower Hobbies at $249.00 and the $30.00 off code with Tower Hobbies $15 Gift Certificate with the purchase of a Great Planes Giant Aeromaster ARF ( http://www.towerhobbies.com/products/greatplanes/gpma1225.html )and free shipping I figured I could not go wrong.I will probably put a DL 50 in it. I have one now and it is a great motor. What servos should I be looking for. I use Hitec Digital MG servos in all my other large planes.
Posted on: 12/2/2007 9:48 AM by Author "carmerxr400"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=6703033
RE: Let's try again DL-50
A fuel dot for the LED great idea I was not going to use the LED but now I will.
Posted on: 9/29/2007 3:24 PM by Author "carmerxr400"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=6428790
RE: DL50 props and RPM
What brand and size prop: NX 22-8 Bission wrap around pitts muffler, has a nice sound. How many gallons of fuel through the motor: 4 Gallons What brand and ratio of oil: Klotz model lube 40to1 What's you RPM: 7200 Elevation 750ft Temp 80 degree
Posted on: 9/27/2007 10:19 PM by Author "carmerxr400"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=6422914
RE: Let's try again DL-50
I'm using a NX 22-8 the spool up is good. Getting 7200 rpm with a bisson pitts muffler. Pittsguy hows is that Yak flying with half of one wing[:D] I bet that fence jumped at your plane.[:-]
Posted on: 8/28/2007 8:24 AM by Author "carmerxr400"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=6295524
RE: Extreme Flight Extra 300, 50cc, 88.5inch Wingspan, Build !!!!!!!
I WANT one and I know it will fly great because it is an Extreme flight. I'm still flying an original 68in yak.
Posted on: 8/24/2007 7:32 PM by Author "carmerxr400"
in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=6282751
RE: Let's try again DL-50
[quote]ORIGINAL: closetguy [quote]ORIGINAL: carmerxr400 Well I got my DL50 mounted in my Wild Hare Extra 300 LX and a prop on it. 15 flips to prime it and 3 with choke on, a pop choke off, 2 more and it came to life for the first time. I was expecting more vibration but I think that it is smoother than the ZDZ50NG that I took out after the cylinder broke at the mounting lugs. [/quote] how did
Posted on: 8/11/2007 9:08 AM by Author "carmerxr400"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=6223961
RE: Let's try again DL-50
0
Posted on: 8/11/2007 9:02 AM by Author "carmerxr400"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=6223949
RE: Let's try again DL-50
Well I got my DL50 mounted in my Wild Hare Extra 300 LX and a prop on it. 15 flips to prime it and 3 with choke on, a pop choke off, 2 more and it came to life for the first time. I was expecting more vibration but I think that it is smoother than the ZDZ50NG that I took out after the cylinder broke at the mounting lugs.
Posted on: 8/9/2007 10:31 PM by Author "carmerxr400"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=6218683
RE: Let's try again DL-50
[quote]ORIGINAL: aerobob [quote]ORIGINAL: carmerxr400 I got my DL 50 today took fedex a while to get it here. Thanks Bob it looks good. I’m replacing a zdz 50ng the BISSON PITTS MUFFLER that was on the zdz fits the DL 50. Questing is how much RPM with a 22-8 will I lose with the Bisson pitts muffler. Sound is not the problem the pitts just fits the cowl nice. [/quote] Exhaust port, bolt size
Posted on: 8/8/2007 10:42 PM by Author "carmerxr400"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=6214322
RE: Let's try again DL-50
I got my DL 50 today took fedex a while to get it here. Thanks Bob it looks good. I’m replacing a zdz 50ng the BISSON PITTS MUFFLER that was on the zdz fits the DL 50. Questing is how much RPM with a 22-8 will I lose with the Bisson pitts muffler. Sound is not the problem the pitts just fits the cowl nice.
Posted on: 8/8/2007 10:26 PM by Author "carmerxr400"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=6214259
RE: *RC Slang*
It's great when I pull it out at the last second.[:)]
Posted on: 7/4/2007 4:00 PM by Author "carmerxr400"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=6070657
RE: FLYBOYS,,the movie
Yes I saw it on the big screen and it was good. I will buy the DVD.
Posted on: 1/28/2007 3:14 PM by Author "carmerxr400"
in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=5336092
RE: Savage X 17mm wheels on a Savage SS.
Thank's I got the parts orderd.
Posted on: 1/19/2007 10:29 PM by Author "carmerxr400"
in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=5292686
Savage X 17mm wheels on a Savage SS.
What do I need to use 17mm hex wheels on my Savage ss that has 14mm hex drive on it now. Do I just need the 86804 HEX WHEEL HUB 17mm (SILVER) from HPI. Thanks.
Posted on: 1/18/2007 8:43 PM by Author "carmerxr400"
in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=5286957
RE: ZDZ 50NG carb
I got a wt201 and installed it. The 50NG starts better than it ever has. 1 flip from behind when warm and the cold starts are good. The mid range is cleaner also.
Posted on: 12/1/2006 8:31 PM by Author "carmerxr400"
in the forum "ZDZ & RCS Support"
http://www.rcuniverse.com/forum/fb.asp?m=5063903
ZDZ 50NG carb
What is the # of the Walbro carb that you recomend for the ZDZ 50NG. Is it the WT201. Thanks.
Posted on: 9/6/2006 12:57 PM by Author "carmerxr400"
in the forum "ZDZ & RCS Support"
http://www.rcuniverse.com/forum/fb.asp?m=4717233
RE: Official HPI MT2 Thread
WHAT IS THE TOWER PART # FOR THE SHIM WASHERS FOR THE DIFFERENTIAL MINE SEEM A LITTLE LOOSE. Thanks.Great Thread.
Posted on: 8/30/2006 9:54 PM by Author "carmerxr400"
in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=4691563
RE: car choice
I have both and they are both great cars. The rc10gt is easy to keep going fewer parts than the mt2.
Posted on: 8/18/2006 9:56 PM by Author "carmerxr400"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=4640853
RE: How close is to close for tx's on the same channel
Thanks for all the input I think that pulling the pin maybe the best way to handle it for now. Maybe we will try to find a channel thay no one is using and see if he will change to that channel. And yes he came to us to let the club know that he was flying close to the field so I think that he will work with the club.
Posted on: 6/28/2006 9:39 PM by Author "carmerxr400"
in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=4442741
| 
