RE: Ofna Cd3- Where's it at???
[quote]ORIGINAL: jikkuria im not sure on the pipe, but im a fan of picco motors. is it safe to assume that a 150 oz. steering servo would be more than enough for a 1/10 road car? [/quote] Yeah a 150oz, servo may be more than you need. The G4S RTR comes stock with 2 Futaba S3003 which is like 35oz and they seem pretty adequate. I upgraded to spektrum Z590 and Z250 for steering and throttle respectively, the car responds quicker and more precise!!
Posted on: 1/17/2010 10:41 AM by Author "charlieboy" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9423131

RE: Kyosho V One RRR
Does anyone know which CVDs are compatible with those on the V-one RRR??
Posted on: 1/17/2010 10:33 AM by Author "charlieboy" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9423106

Walkera 59#DQ Coast Guard
Has anyone gotten this Heli, I just happened to stumble on it online and fell in love with the realism. Not sure you'll be able to perform 3D stunts with it, but seems it would be great for a beginner. Can someone give me their impressions of this chopper?!? [link=http://www.walkera.com/en1/particular.jsp?pn=Z259DQ001]Walkera 59#DQ[/link] you can also find a few vids on youtube
Posted on: 12/31/2009 11:44 AM by Author "charlieboy" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=9374929

RE: Team MAgic G4II Concept car
[quote]ORIGINAL: f575gtc looks like the dropped a few ideas from the prototype into the named G4RS 2009 (what the G4 II is now called). ill wait to see what the end users say about it before I buy mine. [/quote] I'm in a wait and see mode as well, especially because i currently own two G4 s.
Posted on: 6/20/2009 4:14 PM by Author "charlieboy" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=8867358

RE: Team MAgic G4II Concept car
Has anyone acquired one of these cars as yet?!?
Posted on: 6/15/2009 6:05 PM by Author "charlieboy" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=8854481

RE: T-Maxx Trans.
Try Byron Gen its the best fuel on the market, more power cooler temps, its an excellent blend!! I currently run a t-maxx with OS 18 TM, i think i may need to mod my trans because i've broken a few of the pins that lock the gears to the shaft inside the trans.
Posted on: 10/9/2008 6:48 PM by Author "charlieboy" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=8034292

RE: Team Magic G4S
[quote]ORIGINAL: ferrarimk13 honestly, everyone knows im a huge TM fan, but i have to say the NT1 is the best out there at this moment, and you cant go wrong with it. The Hudys know their stuff [/quote] Is there any parts support for this car over here in the West!?!
Posted on: 4/26/2008 6:39 PM by Author "charlieboy" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=7423304

RE: OFFICIAL KYOSHO THREAD: V1 and FW-05 series
[quote]ORIGINAL: 72xmulch hey guys... whats the general consensus on the DBX? [/quote] What is the DBX!?!
Posted on: 4/26/2008 6:00 PM by Author "charlieboy" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=7423167

RE: starting a tmaxx when hot
[quote]ORIGINAL: iamnot a poor tune will do the same thing in my experience if the pinch - or lack of is the problem it's not long before it just starts to die once it's warmed up if your's has been doing this for a while it's probably tuning if it's just started doing it reset to factory settings and retune anyway it's free and may fix the issue... [/quote] I totally agree, i don't think you need a new piston and sleeve or a new engine unless you really want to buy one. Its likely your low speed needle setting is too lean, so it won't start when hot. Reset both needles to factory settings.
Posted on: 4/26/2008 4:43 PM by Author "charlieboy" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=7422912

RE: SH .28
Depends on the climate in your area for the glow plug, i'm running a medium temp GP, Mccoy MC8, OFNA medium or the best yet OS8 ! Needle settings are gonna be hard to tell, reffer to your manual (don't quite remember if it has the stock settings).
Posted on: 4/18/2008 11:53 AM by Author "charlieboy" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=7389000

RE: Team Magic G4S
Thats a great price whats the cost with shipping?? i think you may need to change the body to a sedan body if and when you buy it. The lola bodies are not allowed for most 1/10 racing ie if you plan to race!
Posted on: 4/18/2008 11:37 AM by Author "charlieboy" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=7388936

RE: best pipe on Revo
Looks quite ugly to me, get a THS pipe sounds throaty and produces great bottom-mid range power! https://secure.handzon.com/itechapp/admin/checkout/?storeid=1531&prodid=70455&storereferer=http://www.thsracing.com/110-carstrucks.html
Posted on: 4/18/2008 11:26 AM by Author "charlieboy" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=7388896

RE: Best hi-torq Servo for under 40$
[quote]ORIGINAL: Macanan I got 2 of them, and so far they are really good haven't had one problem out of them [/quote] Looks like a super good deal, how long have you had them in working condition and what do you use them for??!
Posted on: 4/16/2008 5:38 PM by Author "charlieboy" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=7382967

RE: Belts vs. drive shaft for RC Nitro On-road cars
[quote]ORIGINAL: RedcatRacing Here is a belt driven 1/8 scale car we are in the process of testing right now. Our Typhoon will be available next month, but the one pictured below is geared specifically towards racing and speed. Will let you all know if we decide to carry it. Darin [/quote] Darin, i think you should carry a 1/8 scale on-road high speed car, i''m in the market for one right now and the choices are not many. The Kyosho Evolva and the Mugen MRX- 3 or MRX-4 are possible suspects, but the prices are quite high!! HPI also has the 1/8 scale Proceed, but it has been discontinued i don''t think HPI supports it anymore. Keep us posted on your plans with this car, i may delay my purchase until next month, can you give us a sneep peak on this one?? Engine size, electronics body type etc ?!? As regards the debate, belt drive or shaft drive, belt drive is a better choice for on-road cars because it makes for a more balanced car. The momentum caused by the rotating shaft at high speeds usually cause the chassis to be less stable, manufacturers tend to offset the instabilites by placing the engine and gas tank on the same side in order to compensate for the rotation of the shaft. Shaft drive has the advantage of being more reliable, less likely to have pebbles or dirt damage your drive train. But if you want a really good performance and handling (a car to race) get a proven belt drive!
Posted on: 4/15/2008 12:26 PM by Author "charlieboy" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=7376868

RE: OFFICIAL KYOSHO THREAD: V1 and FW-05 series
[quote]ORIGINAL: GYNAIKAS 10000 is not heavyweight...try 20000 or maybe more and you''''ll notice much difference... [/quote] What are your specs on the set-up of this car (FW-05)?!?
Posted on: 4/15/2008 11:50 AM by Author "charlieboy" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=7376725

RE: Team Magic G4S
I''m telling you dude its that good..........
Posted on: 4/15/2008 11:44 AM by Author "charlieboy" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=7376704

RE: Team Magic G4S
[quote]ORIGINAL: TRINI-LUCIAN i know stock motors are generally lacking, but i would like to know if anyone here has specs on the engine in terms of hp, rpm and possible top speed with stock gearing..... The G4s rtr i think has set the standard for on road nitro rtr''s, if the onroad sport is to surge ahead of the dirt dudes and bashers... Think of it...an ifmar approved rtr with kit quality parts within a package! This factored in with economies of scale could present a higher quality experience to new folks while keeping it within reasonable cost! what yall think? [/quote] The stock motor may seem weak (non-turbo .12), but in my opinion it lacks nothing besides a good pipe. I ran my G4S over the weekend and kicked the pants off a few evolvas (yeah 1/8 scale big boys) and V-0ne RRRs. The car''s handling is insane, i''m the same speed as the evolvas (picco .21) on the straight aways, faster going into the corners, my disavantage is exiting corners with the evolvas (their extra wide rear-end clearly). Wow, i can''t believe a little 1/10 car could be this good!!
Posted on: 4/14/2008 8:41 PM by Author "charlieboy" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=7374012

RE: OFFICIAL KYOSHO THREAD: V1 and FW-05 series
[quote]ORIGINAL: jayrguidaben hey guys, i have a fw 05t plus and i wanna know a good alignment on toe and camber in front and rear. i have foam tires already. just want to know ur setup. im gonna run it on the race track. thanks [/quote] Yeah i need these settings too, or where can i find them?!?!
Posted on: 4/14/2008 8:27 PM by Author "charlieboy" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=7373942

RE: Traxxas t-maxx REVvED, RADIO CHOICES??
You can get this radio Airtronics MX-3, i have two and have had no issues, its advanced but still very easy to use!! Not as popular as the futaba and other but you will be amazed at how well it works!! http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXCHA8**
Posted on: 4/13/2008 12:50 AM by Author "charlieboy" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=7369721

RE: Team Magic G4S
Anyone know where i can get one of the stock engines SH .12 for the G4S?? I bought a rolling chassis, to use for parts but the roller was so impressive i'm gonna get a motor and pipe and use it as a backup car. It came complete with a mazda 6 body, spektrum reciever and high torque servos.
Posted on: 4/10/2008 8:01 PM by Author "charlieboy" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=7363002

RE: robinson racing steel spur gear on a t-maxx
I'm not sure why you'd need to modify the shaft, but if its bent replace it. I had the problem with the RR spur brushing against the battery box tho. the clearance in that area is quite close. I took off the battery box cover and used a saw and a dremel to cut a piece off, been working perfect since!!
Posted on: 4/9/2008 12:28 PM by Author "charlieboy" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=7356221

RE: Byrons Gen2
I'm a Byrons Fuel dealer, i guess i should not be posting on this one, but this fully is truely the boss or RC fuels. You can run leaner and cooler than all other with GEN2 !!
Posted on: 4/9/2008 12:22 PM by Author "charlieboy" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=7356187

RE: o.s. .21 tm?
Yeah, i agree the OS 21TM is a rip off, wayyy toooo expensive!!
Posted on: 4/1/2008 8:34 PM by Author "charlieboy" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=7318680

RE: OFFICIAL KYOSHO THREAD: V1 and FW-05 series
[quote]ORIGINAL: mtbkym01 Hong Kong rocks for parts.......I've been to about 18 stores so far, and have picked up: 1 x Picco JLR .12 Evo3 Red Dot 1 x Picco 2607 pipe 1 x Spektrum Sr3001 reciever 1 x Futaba S9451 Servo 1 x Thunder Tiger Starter Box 2 x 200mm bodies (Mazda 6 & DNA 3) 5 sets front tyres 5 sets rear tyres various other V-One RRR spares and hop ups Just gotta put it all together when I get home now. [/quote] Give us the links to your hong Kong Site Pls !?!
Posted on: 3/25/2008 7:11 PM by Author "charlieboy" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=7281880

RE: 2.5 glowplug
Its very likely your running lean or as was said before, you have an airleak!
Posted on: 3/25/2008 6:52 PM by Author "charlieboy" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=7281775

RE: Tires and wheels
[quote]ORIGINAL: HILLFINGER Links below. Wheels --> [b][size=4][link=http://www.impaktrc.com/product_info.php?products_id=1040]Pro-Line Velocity Wheels (Maxx, 17mm hex, 1/2" offset, black)[/link][/size][/b] Tires --> [b][size=4][link=http://www.impaktrc.com/product_info.php?products_id=477]Pro-Line Badlands MT (Maxx)[/link][/size][/b] They are 17mm If you are needing hex adapters, wheels, & tires or just wheels & tires www.impaktrc.com has a nice bundle that can save you a few bucks. Bundle --> [b][size=4][link=http://www.impaktrc.com/product_info.php?cPath=67&products_id=680]17mm Wheel / MT Series Bundle[/link][/size][/b] [image]http://ui13.gamespot.com/1836/revo31.jpg[/image] [/quote] That is a mean looking body what is it called!?!
Posted on: 3/19/2008 5:33 AM by Author "charlieboy" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=7248053

RE: WANTED: Awsome paint job, will pay lots of $$$ =)
Nice nice nice, i love the beetle with the green and silver, its seems simple but i can see its not an easy job!! One question, how did you learn to paint like that?!?
Posted on: 3/11/2008 6:37 PM by Author "charlieboy" in the forum "RC Painting, Detailing & Bodies"
http://www.rcuniverse.com/forum/fb.asp?m=7210458

RE: My First Body......Your feedbacks Please
[quote]ORIGINAL: brett65 Looks good man! Too bad you ruined it by putting it on a t-maxx. Just kidding![:D] It does look sweet. [/quote] Haha ha, i'm hoping all the guys who like you don't think very highly of the maxx will give it a 2nd thought when they see this body!!
Posted on: 3/11/2008 6:28 PM by Author "charlieboy" in the forum "RC Painting, Detailing & Bodies"
http://www.rcuniverse.com/forum/fb.asp?m=7210417

RE: My First Body - Crowd Pleazer 2.0
I have a few question for you or whoever can answer: 1. Does the picture have to be on vinyl sticker paper or can it be like a pic from a magazine? 2. Why did you apply the decals to the body first? 3. If the paper is vinyl, why did you apply masking tape to it when painting? 4. Wouldn't it be good to cut and trim the body before you paint it??
Posted on: 3/11/2008 6:22 PM by Author "charlieboy" in the forum "RC Painting, Detailing & Bodies"
http://www.rcuniverse.com/forum/fb.asp?m=7210384

RE: OFFICIAL KYOSHO THREAD: V1 and FW-05 series
[quote]ORIGINAL: TheVIP Hello Charlieboy, I live in the USA so I purchased it at www.ultimatehobbies.com. This is the only place on the web which had the car. The local hobby shops did not stock the car or will ever stock it. It was about $300 shipped to my home in California. I was debating whether to get the FW-05T+ or the FW-06; but I got the newer one instead because it was just the newer
Posted on: 3/11/2008 12:56 PM by Author "charlieboy" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=7208939