|
RE: sceadu into the pool.......
thanks dooleyej , all things has been dried,and works well, i will fly next weekend.
Posted on: 11/3/2009 10:07 AM by Author "checho4"
in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=9224850
sceadu into the pool.......
Last sunday , i was flying on farm , and leaving from a loop , i dont leave with altitude and land-crash in the pool. I get down all electronic parts , and the engine . The servos were disarmed and dried by one heat gun.also the gyro and the receiver. finally , i reconect all things , and its works perfect. i just want to told you mi little history . regards all Sergio.
Posted on: 10/27/2009 10:54 PM by Author "checho4"
in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=9208001
RE: Glitching = crash, any reccomendations?
have you try with a PCM Recevier?
Posted on: 9/28/2009 9:01 PM by Author "checho4"
in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=9131400
Sceadu 37 Tail troubles
Hi , I have lose the tail a few months ago , the fut 9254 tail servo , failed , fortunly , i didnot crash my chopper. I tried with a JR 8231 Digital servo , and the tails spins out of control when i put throttle, i changed the servo , i put the 9254 , and the trouble continue. I checked the gyro , it works it make corrections when i lift with my hands the heli and try to spin to the rigght or left. I also checked the gyro direction , its ok. I also checek the servo direction , its ok too. i have changed the tail blades , i put the 82 mm tail blades,(the raptor tail blades). Any suggestion? Thanks
Posted on: 8/15/2009 4:52 PM by Author "checho4"
in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=9018683
RE: 401 Gyro with
Thanks for repply. I am a newbee at helicopters , but reading about the 401 gyro , and reading the manual , i found , that if i want to use a slow speed servos , i must use the delay. Pleas correct me if i am wrong. Thanks again. Sergio.
Posted on: 7/8/2009 3:54 PM by Author "checho4"
in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=8916641
RE: 401 Gyro with
My JR digital servo its a DS8231. So the question is , in wich value can i put the delay????? i read that i can start with 40 , but , exactly , wich value its the best???(servo speed is 0.22 Sec) i know that finnaly i must buy a ultra speed servo( like de FUT 9254 ) But i fly with JR , and i prefer JR servos , any sugestion???
Posted on: 7/8/2009 2:46 PM by Author "checho4"
in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=8916474
401 Gyro with
My 9254 fail las week, on my sceadu 50 , and i lose the tail flying , the heli lands , and dont crash I have one JR Digital servo , That i use for presicion flight (pattern planes) , can i put it to the tail on heli , and it will work???? What is the maximun angular velocity that the 401 supports?the 9254 has 60° speed: .08 sec @ 4.8v Thanks for reply.
Posted on: 6/29/2009 10:40 PM by Author "checho4"
in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=8892877
RE: Gyro compatability
any body knows if the 401 works with JR 8231 (.60° speed: .22 sec @ 4.8v)
Posted on: 6/29/2009 10:40 PM by Author "checho4"
in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=8892904
sceadu 30 and 50
Hi all What is the difference between the sceadu 30 and the sceadu 50???? if i buy the 30 , with an 30 size engine , can i upgrade my engine for 50 size later?or must i have a lot of changes? Thanks. Sergio
Posted on: 3/5/2009 12:05 AM by Author "checho4"
in the forum "Hirobo Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8545440
RE: new at 3D Fliying
i have seen that , and if you tellme that some people has done the tunnel pipe i thing that its good.do you have more details aboaut the tunnel pipes??? Thanks . Sergio
Posted on: 2/4/2009 1:54 PM by Author "checho4"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=8437992
RE: new at 3D Fliying
i need to find some plane that has the tunnel pipe becuose the range power of the 140 rx with the pipe its very good.and i dont know if the engine with a muffler works good. Thanks, Sergio
Posted on: 2/4/2009 1:47 PM by Author "checho4"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=8437960
MOVED: new at 3D Fliying
3D Flying!: http://www.rcuniverse.com/forum/fb.asp?m=8429801
Posted on: 2/3/2009 3:10 AM by Author "checho4"
in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=8433341
RE: OS 140 RX With muffler
hi again, what abaout this??? Slimline Inverted 4-Stroke OS 120/140 Pitts Muffler http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXVNM0&P=7 thanks, Sergio Velasquez
Posted on: 2/2/2009 1:49 PM by Author "checho4"
in the forum "O.S. Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=8430207
RE: OS 140 RX With muffler
so , if i make my own header thath get into the bisson(or something like that) it can work well? the distance does not matter?
Posted on: 2/2/2009 1:27 PM by Author "checho4"
in the forum "O.S. Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=8430137
new at 3D Fliying
Hi all i want to get into 3D giant planes , i am a pattern pilot , and i have one O.S. 140 RX TO TRY with 3d. the question is , what kind of plane can i get that this engine work?what kind of planes (yak ,extra or something) has the tunnel pipe(becouse the pipe its some long). Thanks for help. Sergio Velásquez.
Posted on: 2/2/2009 11:45 AM by Author "checho4"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=8429801
OS 140 RX With muffler
Hi ,all i have one 140 rx , and i want to put it on a 3D Plane (like YAK 54 Or Extra or somethinh plane like that), the problem is becouse that planes dont have pipe tunnel , can we use a mufller like bissom or a mini pipe? or the engine dont work ?. Thanks, Sergio Velásquez.
Posted on: 2/1/2009 1:34 PM by Author "checho4"
in the forum "O.S. Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=8426669
RE: 2 cycle aerobatic minipipe Anyone ??
has any body tried it on an o.s. 140 rx???? any body are interest on buy one 140 rx??? i am selling one of mine.
Posted on: 2/1/2009 1:07 PM by Author "checho4"
in the forum "Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=8426580
any interested on 140rx?
Hi all, i want to sell my o.s. 140 rx With webra pipe and header.i can incluide in the package an old YS 120 with the hatori pipe. my email is svelasquez4@gmail.com Thanks
Posted on: 12/21/2008 9:35 PM by Author "checho4"
in the forum "Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=8269142
RE: altitude problem
I live at 5000 fts , and i have a Blade CP its fly cool here in medellin(mi house , for example), but my RC Club its located at 7000 fts , and the strust its low, but it flies.
Posted on: 11/29/2008 6:08 PM by Author "checho4"
in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=8195410
RE: Newbe at 3d electric flyiing
Thanks for reply, I have another question , what is the diference between yhe great planes rimfire outrunner class and the in runner rimfire , in power how is better , and why? Thanks Sergio.
Posted on: 11/23/2008 4:36 PM by Author "checho4"
in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=8175867
Newbe at 3d electric flyiing
I am a pattern pilot , and i want to try with Electric power 3d fliying , i have two lipo batteries (1250 and 910 )mAh , and i want to get in 3d electric fliying. Any sugestions??? like kind of motor , ESC , And off course , planes. Thanks, Sergio
Posted on: 11/19/2008 7:33 PM by Author "checho4"
in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=8164014
RE: CMPRO LEO 110
[quote]ORIGINAL: checho4 Ok i fly my LEO With the OS 140 RX, 4.396Gr ,No carbon undercarriage becouse the propeller its too long , thats incredible, the power its UNLIMITED (Notice that i flight at 7000 feet), APC 17X12N and 15%cool power. the plane looks like a 4 stroke powered.i will post the pics this week , becouse mi camera get down. Regards, Sergio. [/quote]
Posted on: 9/21/2008 10:22 PM by Author "checho4"
in the forum "Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=7977494
RE: CMPRO LEO 110
Ok i fly my LEO With the OS 140 RX, 4.396Gr ,No carbon undercarriage becouse the propeller its too long , thats incredible, the power its UNLIMITED (Notice that i flight at 7000 feet), APC 17X12N and 15%cool power. the plane looks like a 4 stroke powered.i will post the pics this week , becouse mi camera get down. Regards, Sergio.
Posted on: 9/8/2008 3:25 PM by Author "checho4"
in the forum "Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=7933344
RE: Safe voltage for 5 cell NIMH
5.9V OR 6 for safety flight.I dont use regulator.and i have 1400 mAh, Ni-Cd.
Posted on: 8/31/2008 10:37 PM by Author "checho4"
in the forum "Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=7906655
RE: Dash 5
i haved one(2005) , the 60 version , its a excellent , i practice P05 WITH him , but its a too speedy plane like the new designs!
Posted on: 7/31/2008 1:45 PM by Author "checho4"
in the forum "Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=7793073
RE: CMPRO LEO 110
I will put an Os 140 RX , i actually have the 91 FX with OS pipe,but the power is too limitate couse i fligth at 5000 feet. i think to move 1 servo(maybe elevator servo) ,the receiver, and the battery back to get balance.i will post some pictures when the airplane will ready.
Posted on: 7/17/2008 11:04 PM by Author "checho4"
in the forum "Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=7743334
RE: Setting-up a F3A plane - Beginner need advise
I have one , with a o.s.91 fx , i recommend you to put a 4 stroke like an Old YS 120 OR OS 120 AX . The tunned pipe , mi OS 91 FX Need it to have a lot of power , if not , thhe plane wil be a trainer.
Posted on: 4/16/2008 6:23 PM by Author "checho4"
in the forum "Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=7383202
OS91FX+TUNNED PIPE
I Have one on a LEO F3A 110 , with an O.S.+ Tunned pipe + 10% nitro + 14x6 APC , rpms are at 10580 , y fly at 2300 FT. what prop do you thing that works well? how about a 15x10APC , maybe 14x10? Thanks for reply. Sergio.
Posted on: 1/22/2008 1:03 PM by Author "checho4"
in the forum "O.S. Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=6950233
RE: Ys120 FZ manual
i have it in a PDF archive , do you have msn?? or mail to send it. Sergio
Posted on: 7/11/2007 10:47 PM by Author "checho4"
in the forum "Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=6100446
RE: E-FLIGHT BLADE CP
Thanks for reply , i´ll go find the paint stirring sticks. But i´m interested in the treath about make de wood blades.
Posted on: 7/11/2007 10:44 AM by Author "checho4"
in the forum "E-Flite Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=6097541
| 
