RE: somthing for the saito 125a
thanks i have been reading that you should use a 16x6 porp for 3D when i get a bit better i wil change it. thanks
Posted on: 7/8/2009 6:47 AM by Author "chris93" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=8915582

RE: somthing for the saito 125a
thanks for the info not so keen on profiles. thought they had changed the wing design with the 100 so it doesnt tip stall much. im only using a 15x8 prop at the moment would a 16" prop be better for 3D ?? thanks :)
Posted on: 7/6/2009 10:04 AM by Author "chris93" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=8910392

RE: somthing for the saito 125a
cheers for the ideas. not sure about the primonot really my thing but thanks. the aeroworks yak sounds interesting. any one know anything about the funtana 100 that hanger 9 did?? thanks
Posted on: 7/2/2009 3:51 PM by Author "chris93" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=8900717

somthing for the saito 125a
having just crashed my seagull edge 540 i need somthing new for the saito, something like an extra 300, funtana etc hanger 9 would be nice anyone got any ideas thanks chris
Posted on: 6/30/2009 5:49 AM by Author "chris93" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=8893910

RE: Seagull edge 540 60 size
umm i running a 15x8 and i m sure the engine is run in. the transition from idle to full power is good when holding nose up
Posted on: 5/17/2009 4:20 PM by Author "chris93" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=8776654

RE: seagull edge 540 with smoke :)
Thanks. i bort a pete tindal smoke system over here in the uk. this is what it comes with http://www.petetindal.co.uk/Smoke%20System/ heres my set up its a bit tight i know sorry about poor quality [IMG]http://i710.photobucket.com/albums/ww107/edge_05/Image549.jpg[/IMG] here is where the injector goes into the exhaust [IMG]http://i710.photobucket.com/albums/ww107/edge_05/Image547.jpg[/IMG] I started by drilling the exhaust and tapping it to get a thread for the longer injector to screw into. I made sure the two holes in the injector where not pointing into the exhaust valve. And then fixed it in place with two nuts on each side of the injector. But remember to put two nuts on the side the tube connects to or you will have to take the injector off and put them on. I then straped the pump and tank into the fuselage making sure it didnt effect the cg and connected it all up with fuel tube and using the given tube from the pump outlet to the exhaust. I pluged the pump into a spare channel on the recever, put some smoke oil in it, fire up the engine and flicked the switch. im yet to mix it with another channel though. hope this helps if you want some more detailed pictures just ask. thanks chris.
Posted on: 4/5/2009 7:48 AM by Author "chris93" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=8650111

seagull edge 540 with smoke :)
alright, just thought i post a short vid of my edge with smoke as i was amazed at the amount i got from a four stroke (saito 125) http://www.youtube.com/watch?v=TSICiyyVO1k&feature=channel_page what you think? thanks chris
Posted on: 4/3/2009 8:53 AM by Author "chris93" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=8644458

Seagull edge 540 60 size
hello ive put a saito 125 in my edge athough ive just started prop hanging it will only hang if you are at full power, but if you gradualy build the power it coffs and spluters then stalls. any ideas? thanks chris
Posted on: 3/15/2009 1:00 PM by Author "chris93" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=8580297

RE: Moki 210
wahey [:D]got the moki started, just finished packing it away did what you said but put a drop of nitro down the carb to give it a boost, just needs a little more tuing and it should be flying soon thanks for the help. just incase your curious its in a hanger 9 sundowner. thanks again chris[:D]
Posted on: 11/24/2008 11:19 AM by Author "chris93" in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=8178278

RE: Moki 210
thanks for the advise guys i will see if thats works thanks
Posted on: 11/23/2008 12:52 PM by Author "chris93" in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=8175283

RE: Moki 210
It did once when i put some fuel down the glow plug hole but apart from that no.
Posted on: 11/22/2008 9:46 AM by Author "chris93" in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=8171781

Moki 210
HI, im having trouble starting my moki 210 im not running any pumps and im running it on 0% fuel any ideas thanks chris
Posted on: 11/22/2008 8:32 AM by Author "chris93" in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=8171652

RE: The BEST Smoke System
I have found that pete tindal's smoke systems are good just put one on my edge 540 with a saito 1.25fa great smoke [:D] will add picture soon.
Posted on: 11/17/2008 11:18 AM by Author "chris93" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=8155754