|
RE: Aurora 9Ch, Spectra Pro & Optima - FAQ & Undocumented Features - Mixes, Setups, Tips.
I bought my Aurora earlier this Spring. Gave it a password ( version 1.07 ). I do not remember my password. Have tried everything I can think of for an hour. Now what do I do? Thank you in advance.
Posted on: 9/3/2012 9:05 PM by Author "cjtyped"
in the forum "Hitec/MultiPlex Radios- Ask Hitec Customer Service"
http://www.rcuniverse.com/forum/fb.asp?m=11216458
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Hello, I am in need of a replacement cowling for my 72" Tiger Moth. Willing to pay for it plus shipping. Can you help me? I have had several NP planes and have been happy with them. The Tiger Moth is one of my 40 years in the hobby all time favorite. Thank You
Posted on: 7/26/2012 9:06 AM by Author "cjtyped"
in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=11170019
RE: Want aural altitude telemetry
I have all Hitec equipment, but only have the Eclipse transmitter. Can I use the telemetry with the Eclipse?
Posted on: 6/9/2012 4:29 AM by Author "cjtyped"
in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11112122
Want aural altitude telemetry
Mark my words, some day we will have to keep our planes below 500' agl. I really don't know WHY we need to go higher anyhow. But is t here any system of any kind that can TELL me while I am flying my altitude? I don't want to have to look away from my plane to see, and I don't want to have to rely on someone else reading for me while I am flying. Help? Thank you inn advance.
Posted on: 6/7/2012 4:49 PM by Author "cjtyped"
in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11110524
RE: Wallace Gear for WM J-3 Cub ARF….
I have dealt with this company several times, and have never been disappointed. cublandinggear.com has even at times called me personally to make sure I would get what I wanted. I have even used their gear on a Tiger Moth by turning the gear 180*. I highly recommend this company. Cheaper than Robart and high customer satisfaction goals.
Posted on: 5/4/2012 8:58 PM by Author "cjtyped"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=11068967
RE: BH Glasair 120
I have one of these I am about to maiden. Bought it at an auction. I am curious what to use for screws/bolts to hold the canopy....instructions do not indicate size or type. Can anyone help me? Thank You in advance.
Posted on: 4/29/2012 3:33 PM by Author "cjtyped"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=11061568
RE: Corrugated ailerons/elevators
Hi Les, The reason for the corrugations on the Cessna surfaces is to reduce weight and at the same time increase strength of the sheet metal.the sheet metal is very thin but the corrugations are very ueffactive.
Posted on: 4/20/2012 11:44 PM by Author "cjtyped"
in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11050690
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Hello, I need a cowling for my 1.2 Tigerr Moth. Can you help me?
Posted on: 2/20/2012 3:53 PM by Author "cjtyped"
in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=10968111
Multiengine telemetry
Wondering if anyone knows of this being available? I have this fantasy of flying my 421 and when an engine fails i would hear " right rudder" coming from my transmitter. Also wouldn't it be possible to have telemetry tell you when you were flying above a determined altitude? An exciting time for radio progress. Thank You in advance.
Posted on: 12/18/2011 11:19 AM by Author "cjtyped"
in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10865158
RE: Funny phrases at airflield
"he was so far behind the airplane, he needed binoculars just to see it"
Posted on: 12/13/2011 4:06 PM by Author "cjtyped"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=10858117
Telemetry and multiengines
I have sevral multiengine planes I will be flying next year. Wondering if any of the telemetry systems have the ability to indicate both engines' RPM, so that I can detect and engine out coming and WHICH one, thereby applying the proper rudder. Thank you in advance.
Posted on: 12/13/2011 3:49 PM by Author "cjtyped"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=10858089
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
(1) CESSNA 421 ENGINE NACELLE NEEDED. I WILL PAY FOR IT. CAN YOU HELP ME? THANK YOU.
Posted on: 10/27/2011 12:37 PM by Author "cjtyped"
in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=10785329
RE: Brazing vs Silver soldering
I gotcha on the soft solder. I have the copper wiring. Would rosin core solder be considered soft? If not, recommendations, please? Thanks again.
Posted on: 8/19/2011 4:48 PM by Author "cjtyped"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=10677985
Brazing vs Silver soldering
I want to do one or the other for some simple music wire landing gear. Which is better? Is either easier than the other? I have some brazing rod with flux coating and would use my butane torch, or try and use the torch with the silver solder. Thank You in advance for your opinions.
Posted on: 8/19/2011 2:54 PM by Author "cjtyped"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=10677855
RE: Green models 120 Tiger Moth
I had the Nitroplanes version, which again I believe is the same plane. For landing gear, I bought "Cubnuts" landing gear and installed the gear reversed from what it would be on a Cub. Looked good and VERY functional. Magnum 1.2 fs for an engine. Super flyer. Lost it due to battery failure, my fault. I do have a replacement I bought on fleabay.
Posted on: 7/28/2011 6:08 PM by Author "cjtyped"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=10643981
RE: 1/4 Scale Cub Landing gear upgrade?
Wrangler you will probably have to email thecubnut to get to communicate with them. I have had their gear on 2 planes (Super Cub and Tiger Moth), and I can vouch for their ruggedness and function. Absolutely worth the money. Giive them the dimensions they ask for and you will not be disappointed.
Posted on: 7/20/2011 8:45 PM by Author "cjtyped"
in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10631317
Model Aviation Rotoplane
This month's issue shows a rotoplane on page 69. Does anyone have any experience with this? It is just odd enough to catch my eye, and I think I may like to build one. Anyone else?
Posted on: 6/29/2011 8:27 AM by Author "cjtyped"
in the forum "Unusual R/C"
http://www.rcuniverse.com/forum/fb.asp?m=10598153
Allen Head Bolt Cover/Cap
I know that somewhere someone knows where one can get these allen head bolt knobs. They slip right over the allen head bolt, and make turning the bolt by hand easy. I know they are not for engine mountng, but I would like to use them on my wings to hold them on to the fuselage, instead of fighting with an allen wrench. Anyone's help is certainly appreciated.
Posted on: 6/6/2011 12:13 PM by Author "cjtyped"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=10559817
RE: hobby king equivalent of hitec 645 servo?
I don't follow your post...what are the rebadged Power servos?
Posted on: 5/26/2011 7:24 PM by Author "cjtyped"
in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=10542518
hobby king equivalent of hitec 645 servo?
am searching for the subject. I appreciate your help. Thank You in advance
Posted on: 5/24/2011 11:00 PM by Author "cjtyped"
in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=10539245
RE: Global/VQ 1.20 size Turbo Porter
Getting ready to mount my engine. I marked where I thought the centerline should be, but then I noticed that there were marks on the firewall from the factory. Those of you who have mounted your engines, do the factory marks work out for you? Thank You in advance.
Posted on: 5/21/2011 1:40 PM by Author "cjtyped"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10532960
RE: Rack and Pinion System
I am wanting to duplicate the Cessna retractable landing gear for single engine aircraft, plus thinking about a way to open a cargo door on an rc plane. Thanks for your help.
Posted on: 4/22/2011 3:48 PM by Author "cjtyped"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10478852
Rack and Pinion System
Trying to locate a source of these systems for my planes, thought I'd give the car people a try. Can anyone point me in a direction to locate some?
Posted on: 4/20/2011 6:35 PM by Author "cjtyped"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10475484
Rack and Pinion System
Need help locating a rack and pinion system for my model planes. Can anyone point me in a direction where I might find a source of these? Thank You in advance.
Posted on: 4/19/2011 4:31 PM by Author "cjtyped"
in the forum "RC Robotics and Autonomous Robots"
http://www.rcuniverse.com/forum/fb.asp?m=10473037
RE: Global/VQ 1.20 size Turbo Porter
Can anyone point me in the direction of making the cargo doors open in flight? And also be able to "kick" the skydiver out in flight? Your help is appreciated.
Posted on: 4/18/2011 4:50 PM by Author "cjtyped"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10470697
Tiger Moth Wanted
Looking for NIB. 1.2 size. Thank You.
Posted on: 3/26/2011 8:48 PM by Author "cjtyped"
in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=10425039
RE: Nitroplanes Tiger Moth 120 - Build
Does anyone have a NIB of this plane? I would like to buy one. Thank You in advance.
Posted on: 3/26/2011 10:41 AM by Author "cjtyped"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10424028
RE: 25% Cessna L-19/0-1 Bird Dog build
Benn following this thread, even though I am building a 1/3 Cessna 170, I have found many tips and techniques here. Thank You all for your help. I find the 170 and Bird Dog have a lot in common. As such, can anyone tell me the usual diameter of the round access panels used on the BD, and I am guessing 6 screws per panel? Can anyone point me to a diagram of where these panels are located on the wing of the BD? Thanks again
Posted on: 3/14/2011 9:46 AM by Author "cjtyped"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10399026
RE: Dihedral angle vs wing tip rise
Thank you very much. I knew someone would help me!!
Posted on: 2/19/2011 11:39 AM by Author "cjtyped"
in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=10348120
Dihedral angle vs wing tip rise
Am building an Effinger 1/3 scale Cessna 170. Calls for 3 degrees of dihedral, but gives no numbers for how much the wing tip should be above horizontal. Can anyone help me? The wing span is 12 feet. Thank You in advance.
Posted on: 2/19/2011 1:28 AM by Author "cjtyped"
in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=10347300
| 
