RE: Plettenberg Advance 30-10 Inrunner Test Data!
Hi Guys Thanks all for answer and Info. Next time I'll turn my brain earlier. You all have right. OK. [;)][;)][;)] SR Andreas
Posted on: 11/30/2011 4:20 AM by Author "crazyf3a" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10835943

RE: Plettenberg Advance 30-10 Inrunner Test Data!
Hi Guys One word about the Setup with the Schulze fut 32-80 KA for the Pletti Advanced. The Dip switch 4 is for outrunners OFF. For Inrunners ON. The Advanced is a Inrunner. Is this correct. SR andreas
Posted on: 11/28/2011 12:24 PM by Author "crazyf3a" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10833031

RE: ARIXTRA, new french F3A design
A picture of my old Saphir
Posted on: 11/8/2011 9:02 AM by Author "crazyf3a" in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10802536

RE: e-Neptuno
Hi Derek I fly a C-Arf Integral. Is the Neptuno EP bigger then the Integral. I saw it is very small. What is the different between this two planes. sr andreas
Posted on: 4/14/2011 12:21 AM by Author "crazyf3a" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10459955

RE: Russian F3A masterpiece “Europa PRO LT� now produced in Europe
...
Posted on: 3/2/2011 3:15 AM by Author "crazyf3a" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10373849

RE: Russian F3A masterpiece “Europa PRO LT� now produced in Europe
It looks like the old Angel S from Seba. Or I'm wrong. SR andreas
Posted on: 3/2/2011 3:14 AM by Author "crazyf3a" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10373846

RE: New Sebart Wind 50E
Hi Rick Yes you are right. I have the same Problems with the stab tube. I put a Tape around the tube, but the problem is the same. The elevator is on the front side shaky, (loose). In my opinion the Inside tube of the elevator is loose. What is your opinion. I can do 2 screws in the tube, like your tipp. Are the problems then gone. To glue the stab on both side is not a so good Idea. and will bring another problems. (Assembling and so....) When the problems is only the too small carbon Tube, the second screw is the best solution. Thank for yourTipp. Andreas
Posted on: 2/15/2011 11:57 PM by Author "crazyf3a" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10339640

RE: New Sebart Wind 50E
Hi to all builders What do you make with the elevator tube. It does not fit. I think it is the tube. Who have the same problem, and what can i do. Not glue. Another posibility. SR andreas
Posted on: 2/15/2011 10:20 AM by Author "crazyf3a" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10337997

RE: New Sebart Wind 50E
[quote]ORIGINAL: koakiss [quote]ORIGINAL: crazyf3a Hello Here are Pictures about the engine mount. The engine fit perfect. [:)] I'm curious how that thing flies. [/quote] what motor is that? how many walts and max current? looks nice. [/quote] Hi The motor is a KONTRONIK Kora Top 30-27 with 270KV.Made in Germany. I fly with 8S Lipo 3.300mAh and a 17x12 APC. And reduced Trottle stick
Posted on: 1/11/2011 11:05 PM by Author "crazyf3a" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10257141

RE: New Sebart Wind 50E
Hello Here are Pictures about the engine mount. The engine fit perfect. [:)] I'm curious how that thing flies.
Posted on: 1/8/2011 6:22 AM by Author "crazyf3a" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10247701

RE: New Sebart Wind 50E
Hello The elevator is completed. With Fut S9650. I do not know why I'm doing everything so complicated. [:D] [:D] [:D] On Wings I use the Savöx SC 1251 MG. A Low Profile Servo. 9kg. And on Rudder the same. And the original Cover. It looks great. The Electric engine is a Kontronik Kora Top 30-27 with 8S Lipos. Hyp. 4.000 mAh 25C 800 gr. All Parts from my Astral x 120 (Hirobo). I know it was not the lightest thinks. So I will have 150 - 200 gr. more. There is no Problem. I fly my SICKLE 46E with a half F3A Pack FP 5350 mAh. My reasoning is more volts and less amps. @ Rick I hope you will visit me next time when you in Klagenfurt. Andreas
Posted on: 1/5/2011 12:56 AM by Author "crazyf3a" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10240616

RE: New Sebart Wind 50E
Hello to All builders of Wind S 50 Today I have buy a Wind S 50. For elev. I have Fut S9650. but the servo is to big. What can I do. Andreas
Posted on: 1/3/2011 10:08 AM by Author "crazyf3a" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10236369

RE: European Championship In AUSTRIA
Hello to All I have just come from the European Championships in Kapfenberg, Austria. I had made only one OK, (three) photos. It shows the machine of CPLR with the original signature of the multiple Austrian world champion Hanno Prettner. I think he was visit Hanno in Carinthia. CPLR flies so not better. But it is a recognition. SEBA, Gets more points, than he........but this is a think of the jury. Competition pilots know this. Gerhard Mayer had at round 3 Problems with the Controller. The regulator has turned off. He flies the new Advance of Plettenberg. Super Engine. I have spoken with Gerhard and he loves the new Pletti. I saw it myself . Great........ Special greetings from Austria EM Andreas On Friday I will go back to the semifinals and Saturday's grand finale.
Posted on: 9/2/2010 4:09 AM by Author "crazyf3a" in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=9974123

RE: e-Neptuno
Hello Please can anyone tell me the Diameter of the Spinner-plate. Is the spinner in the Kit included? SR Andreas
Posted on: 1/22/2010 7:32 AM by Author "crazyf3a" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=9437492

RE: Neptuno 170
Hello to All I think there is a problem with weight. In my opinion, when the Kit is under 2,300.00 Gramm, there is no Problem to build under 5 Kg. But the plane ist over 2.600 gr. [:(] Is this not a problem for Electric powerd. What is your opinion. SR andreas
Posted on: 1/22/2010 7:26 AM by Author "crazyf3a" in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=9437372

RE: Neptuno 170
Hello Thanks for the tip. Yes, I want to buy an Electric Version. I spoke with the dealer from Germany. He told me that there is no problem to get a plane to Europe. Now I look for more informationen about this plane SR andreas
Posted on: 1/22/2010 6:35 AM by Author "crazyf3a" in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=9437441

RE: Composite-ARF Integral, kinda build thread
These are my motors [:)] [:)] [:)] More can not be done. An idea for all. A motor with no problems.
Posted on: 10/6/2009 2:25 PM by Author "crazyf3a" in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=9151490

RE: Composite-ARF Integral, kinda build thread
My new Integral is ready to fly. [:)] [:)] [:)] Flight weight: 4.972 gr. with FP Evo 5.350 mAh Motor: Plettenberg Xtra 30-10 evo Esc: Schulze future 32-80 KA Akku: Old Flightpower Evo 17C 2x 5S 5350 mAh Servos: Ele: S9650, Rud:S9351, Ail: S9452 The first flight will be 2010 I think..... [:D] [:D] [:D] I'm happy. Thanks to all for the help
Posted on: 10/6/2009 1:43 AM by Author "crazyf3a" in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=9148758

RE: Composite-ARF Integral, kinda build thread
Hi to All The stab of my Integral had a difference of 0.5 deg. So I had to do something. Not the first time, I'm not the only. I know all know about the errors or the quality of the kit. I want nothing to say more about this. An old saying says: Speech is silver, silence is golden. For any builders Helps or Tipps. I have built stab adjustors. So I made it. First, I carefully drilled the Carbon bolt out from the stab. Then I took my Dremel. Next step, I fitted plywood 2,5 mm and and adjusted everything. The last step i make Plywood 2,0 mm filling. So that the adjustor has fit exactly. Here are some photos about the work. The stab now I can adjust exactly. The next step is to take wing adjustors. But this is other story.
Posted on: 2/5/2009 2:08 PM by Author "crazyf3a" in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=8441752

RE: Composite-ARF Integral, kinda build thread
Thanks for the tip. The photo I have seen, and know the problem with the tail wheel . Therefore, I search for a better solution. On this way "Merry Christmas" to All.
Posted on: 12/24/2008 6:50 AM by Author "crazyf3a" in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=8277457

RE: Composite-ARF Integral, kinda build thread
Question: How will the 2mm hinge wire from the rudder attached. How can I make. Please can someone post a picture. SR andreas
Posted on: 12/23/2008 7:07 AM by Author "crazyf3a" in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=8273901

RE: Astral X 120
Hello to All I bought a Hirobo Astral X 120 by a Dealer in Austria. He had one last Model in Stock. But there was no Manual. Please, help me to find a manual of this Airplane. I need some informaton about this model. CG etc..... SR andreas
Posted on: 10/19/2008 4:33 AM by Author "crazyf3a" in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=8038477

RE: Hirobo Astral X
Hello Who can help me I m searching a download manual for Hirobo Astral X 120 SR andreas
Posted on: 10/11/2008 5:16 AM by Author "crazyf3a" in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=8038482

RE: European Championship 2008 - Brescia Italy
Other Photos of EC 2008 Italy
Posted on: 9/4/2008 2:42 PM by Author "crazyf3a" in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=7919686

RE: European Championship 2008 - Brescia Italy
Photos of OSIRIS
Posted on: 9/4/2008 2:34 PM by Author "crazyf3a" in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=7919683

RE: European Championship 2008 - Brescia Italy
Any Photos at Italy EM2008
Posted on: 9/2/2008 4:10 PM by Author "crazyf3a" in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=7912465

RE: European Championship 2008 - Brescia Italy
[:)] Best Maschine, and best Pilot at EM 2008 in Italy. [:)]
Posted on: 9/2/2008 4:05 PM by Author "crazyf3a" in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=7912450

RE: European Championship 2008 - Brescia Italy
Hello to All The right result 1 - CPLR 2 - Silvestri 3- Beschorner 4 - Carrier 5 - Mayr Team results as follows... 1 - France 2 - Germany 3 - Austria 4 - Italy I hope we will seen at the 15th F3A EM in Austria 2010 Andreas
Posted on: 8/31/2008 6:08 AM by Author "crazyf3a" in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=7904242

RE: AXI 5330 F3A - Loose Magnets
Hi to all In Austria I saw many Axi's with loose magnets. I heard anything about this motor. The answer is simple. Weight the motor. The new Axi has more weight. And when you look about the ball Bearings you will see the Difference. The problem with the magnets is simply the Bearing seat. A large prop only makes it worse. The right prop for the AXI is the 20x13 Whether it is better now, I have not heard.
Posted on: 5/8/2008 8:11 AM by Author "crazyf3a" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=7470680

RE: Schulze Future 32.80KA F3A
Hallo Chad First thanks for help. You are the greatest. This is exactly what I wanted. To find upper Pos. point is not a problem. But the lower position. I have make like your instuctions. I think that the curve is false. Here is a picture. Please look at the photo. The second photo is not correct. VR tuning (operation modes). Andreas
Posted on: 4/28/2008 3:26 AM by Author "crazyf3a" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=7429176