|
RE: WIN A FREE Scale Fuselage from V-East & Graupner Helis
count me in!!!!, happy holidays to everyone.
Posted on: 12/24/2008 1:46 PM by Author "csanlley"
in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=8278479
RE: Atlanta Fuselage Splash..
hi guys: sorry for the very late response, Thanks Deadstick, as soon i start reading and searching for mold making on the web ill contact you, I havent had time to sit on my computer for a while... im going search on the web cause im very into make a plane out of a mold. Atlanta 60: any update on your project??
Posted on: 12/6/2008 8:28 AM by Author "csanlley"
in the forum "Composites Fabrication And Repair"
http://www.rcuniverse.com/forum/fb.asp?m=8217945
RE: 2009 Jet events ( Outside the USA)
[b]Caribbean Fly In 2009 Dominican Jet Meet January 16th, 17th and 18th, 2009 [/b] See our website www.cfi2009.com for additional information Contact email: cfidr2009@gmail.com Location: Santo Domingo, Dominican Republic
Posted on: 12/1/2008 8:10 AM by Author "csanlley"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8200787
RE: Atlanta Fuselage Splash..
Hi guys: Atlanta60 very clean job, a question for u, lets say that i already made the molds for a plane, how do you do to make the final fuse? do you gelcoat/fiberglass the two halfs separated and then glued together ?
Posted on: 11/25/2008 8:27 AM by Author "csanlley"
in the forum "Composites Fabrication And Repair"
http://www.rcuniverse.com/forum/fb.asp?m=8181197
RE: AKM SU-27 Flanker-Does Look Good
I used 3mm flybar from a Trex600. havnt flown mine but it seems strong enough
Posted on: 11/11/2008 12:09 PM by Author "csanlley"
in the forum "Extreme Speed Prop Planes"
http://www.rcuniverse.com/forum/fb.asp?m=8136427
RE: AKM SU-27 Flanker-Does Look Good
Well..... engine already installed, all dirty work done... Let see how does perform and I let you know
Posted on: 11/3/2008 7:36 AM by Author "csanlley"
in the forum "Extreme Speed Prop Planes"
http://www.rcuniverse.com/forum/fb.asp?m=8110253
RE: AKM SU-27 Flanker-Does Look Good
Hi Guys, im almost done with the balsa work on the fuselage, i just installed the engine, by the way, i went a bit crazy with the power setup, it has a O.S. 91 VR-DF, yeap, a little to much but im going to fiberglass the entire aircraft, I also put 3mm rods for elevator and rudder and im planing to use robart hinges on all surfaces. since im going to have a lot more weight on the nose, im planning to use separated servos for rudder, i went with hi tork for elev and ail, and thats all for now... here is a picture of the engine, after i fiberglass the aircraft and installed the engine, im going to make the engine hole smaller, i had to do it that big, because of the size of the engine and because the carb is in the rear. let me hear your comments!
Posted on: 10/30/2008 9:34 AM by Author "csanlley"
in the forum "Extreme Speed Prop Planes"
http://www.rcuniverse.com/forum/fb.asp?m=8098443
RE: AKM SU-27 Flanker-Does Look Good
I receive my plane yesterday!!! ive never been so happy to see a box full of bolsa and plywood [:D] i was thinking of using a O.S. 91vr Ducted fan engine on my su27 but the thing is that the rear exhaust kinda mess up everything, i dont know where im gonna put the pipe, my other choice is a 91fx with the jett-Stream muffler.
Posted on: 8/14/2008 2:38 PM by Author "csanlley"
in the forum "Extreme Speed Prop Planes"
http://www.rcuniverse.com/forum/fb.asp?m=7845520
RE: AKM SU-27 Flanker-Does Look Good
Does anyone knows if AK-models is open and taking orders? i placed an order yesterday for the Su-27 and received an auto-confirmation email, after that i sent an email asking some quiestions but havent heard anything from they, and my credit card hasent been charge for the order. suspicious huh?
Posted on: 7/23/2008 3:12 PM by Author "csanlley"
in the forum "Extreme Speed Prop Planes"
http://www.rcuniverse.com/forum/fb.asp?m=7763692
RE: AKM SU-27 Flanker-Does Look Good
what about the new O.S. 120AX ? has anyone try it?
Posted on: 7/23/2008 12:07 PM by Author "csanlley"
in the forum "Extreme Speed Prop Planes"
http://www.rcuniverse.com/forum/fb.asp?m=7763120
RE: AKM SU-27 Flanker-Does Look Good
Hi everyone, i ordered mine yesterday, i can't wait to get it here, i think im going with the OS 90FX with a Jett pipe, what do you think about that engine setup?
Posted on: 7/23/2008 10:40 AM by Author "csanlley"
in the forum "Extreme Speed Prop Planes"
http://www.rcuniverse.com/forum/fb.asp?m=7762854
RE: Bob Cat Copy Falcon 120 Jet
Scalejet: are you going to use only one servo on elev as mine?
Posted on: 3/19/2008 10:22 AM by Author "csanlley"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7248749
RE: Bob Cat Copy Falcon 120 Jet
I sanded the wood engine base for about 5deg of down thrust, and the plane flew very well, with no problems, i had to make the hole in the back of the fuselage a bit bigger to make room for the starter but nothing huge. about climbing with power i think it didint. i have to dbl check with the pilot =P
Posted on: 3/19/2008 10:20 AM by Author "csanlley"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7248734
RE: Bob Cat Copy Falcon 120 Jet
More Pics. I replaced the stock CA Hinges with robarts, also made the falps to deflect about 75 deg. for using it as speedbrakes since the P-70 has more thrust on idle, used Futaba digital on all flying surfaces except on rudds that i used JR minis non digital, i change the servos conector for 6 pin multiplex to reduce the number of connections on the wing and to provide a more secure connection, to use the engine mount provided in the kit in the P-70 configuration you need to use it inverted as shown in the pictures.
Posted on: 3/18/2008 8:32 PM by Author "csanlley"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7243299
RE: Bob Cat Copy Falcon 120 Jet
200? nope, but pretty fast for a chinesse glow balsa+monokote wings pusher converted to turb
Posted on: 3/18/2008 1:03 PM by Author "csanlley"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7244066
RE: Bob Cat Copy Falcon 120 Jet
Since my friend has more complicated aircraft he prefers the 12X. Im needding a Tx right now and im thinking of getting a 9303 on 2.4
Posted on: 3/18/2008 12:15 PM by Author "csanlley"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7243691
RE: Bob Cat Copy Falcon 120 Jet
about the speed i really dont know but i must say that you need to manage the throttle very well, since your having more than 5lbs of extra thrust, at mid stick will fly in a reasonable speed.
Posted on: 3/18/2008 11:34 AM by Author "csanlley"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7243675
RE: Bob Cat Copy Falcon 120 Jet
Thanks... we are waitting for the JR 12X 2.4
Posted on: 3/18/2008 10:28 AM by Author "csanlley"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7243342
RE: Bob Cat Copy Falcon 120 Jet
Here are a few pictures of the build process for a falcon 120 with a P-70, we flew it last sunday and it was like a rocket. we did some hi-G turns and the plane seems to handle it. we have another falcon 120 with a P-60 in our field, and the diference betwen both aircraft are the flight time and speed, p-70 is a bit faster but is limitted to 6 or 7 min of flying with a 2 litters tank, we have a 2nd tank in the plane that was for smoke but now we are thinking on using it for fuel.
Posted on: 3/18/2008 10:17 AM by Author "csanlley"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7243240
| 
