|
RE: Evolution GT26 Choke/Throttle Springs
My throttle arm is just a nose wheel steering arm
Posted on: 12/11/2009 7:33 AM by Author "danny03"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9321379
RE: Evolution GT26 Choke/Throttle Springs
as you can see in the picture I have completely removed the throttle spring. On the choke if I was going to use a servo I would leave the spring in place, but remove or bend the hooked end out of the way.
Posted on: 12/10/2009 8:51 PM by Author "danny03"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9320382
RE: Wiring and electronics questions...
You may be refering to something similar to these. http://duraliteflightsystems.com/powerbox-systems/powerBox-systems-powerboxes?product_id=91 or these http://www.smart-fly.com/Products/Expander/expander.htm scroll down till you see EQ10 and that is where servo matching begins. I have never used any of these, so I will not make any comments on them....
Posted on: 12/9/2009 1:31 PM by Author "danny03"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=9316697
RE: great service from southwest r/c engines!!!!
Do they have a web site? I got an address for southeast rc but not southwest...
Posted on: 10/22/2009 5:47 PM by Author "danny03"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9194180
RE: Check If I Have CG Figured Out Correct
From what I could see of your drawings, they are correct. I assume you are show 25% and 33% MAC
Posted on: 10/22/2009 5:43 PM by Author "danny03"
in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=9194172
RE: Master and slave mixing
You are welcome, I am glad that you got it all figured out.
Posted on: 10/9/2009 8:25 PM by Author "danny03"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=9160371
RE: Master and slave mixing
for the sake of explanation if channel 2 is aileron and channel 6 is aux1 (on the Receiver) then the program mix will be Ail to Aux 1 and not Ail to Ail
Posted on: 10/8/2009 11:34 PM by Author "danny03"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=9158141
RE: Aileron
I belive that this is what you are looking for.... http://www.irfmachineworks.com/rds/ (edited so that link would work as a link)
Posted on: 10/4/2009 7:28 AM by Author "danny03"
in the forum "Aerodynamics"
http://www.rcuniverse.com/forum/fb.asp?m=9144484
RE: Aileron
Well it is later and here is the link that I was telling you about. http://www.rcscalebuilder.com/forum/forum_posts.asp?TID=15&PN=1&TPN=10 study the pictures and text and you will be surprised at how easily they can be utilized...
Posted on: 10/4/2009 12:24 AM by Author "danny03"
in the forum "Aerodynamics"
http://www.rcuniverse.com/forum/fb.asp?m=9144847
RE: Aileron
Don, I do not have any flight experience with them, but I had designed another set of wings (using the same concept) for my giant protege. However before I could complete the wings, my protege had an untimely contact with terra very firma...There is a build thread on RCSCALEBUILDER.COM where the concept was used in a UHU 219 (I believe). so you may want to check it out. I will try and provide a link later....
Posted on: 10/4/2009 12:11 AM by Author "danny03"
in the forum "Aerodynamics"
http://www.rcuniverse.com/forum/fb.asp?m=9144823
RE: Aileron set up
Nope, If you move the stick to the left the airplane should roll to the left which will require the left aileron to move up.
Posted on: 8/16/2009 7:28 PM by Author "danny03"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=9021109
RE: Pusher Muffler
Thanks
Posted on: 8/7/2009 5:58 PM by Author "danny03"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8998267
RE: Pusher Muffler
I am using a pitts style side mounted muffler on my Yak-58 Pusher. These style mufflers are also available for glow engines.
Posted on: 8/7/2009 1:51 PM by Author "danny03"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8997725
RE: why does my picture of display never change?
go here and scroll down until you come to MY AVATAR. That is where you can upload your new avatar. http://www.rcuniverse.com/forum/editprofile.asp
Posted on: 7/27/2009 8:30 AM by Author "danny03"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=8967211
RE: servo positioning......!!!
I really don't have an answer. I have never looked for a premade extension that was twisted, so I do not even know if they come . What I have done is take a short extension, cut it in half, solder in a twisted set that I have made to the correct length. Maybe someone else can give you another idea...
Posted on: 7/6/2009 10:30 PM by Author "danny03"
in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=8912099
RE: servo positioning......!!!
I scratch built a giant protege that had a 101" wingspan. in this airplane I had to make 2ea 40" extensions, 2ea 20" extensions and I believe 2ea 36" extensions. The only thing that I had done to to the extensions was to twist the wires. I did not use any kind of shielding nor did I need any. No interference experienced on this plane.
Posted on: 7/6/2009 9:48 PM by Author "danny03"
in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=8911953
RE: servo positioning......!!!
IMHO it does not matter one little bit. I will try and get my pushrod at 90 degrees to my servo arm, but I do not worry about orientation of the servo body.
Posted on: 7/5/2009 11:06 PM by Author "danny03"
in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=8909495
RE: what to turn on first?
according to the DX6I manual page 22, it does not matter. system will still operate. Tx will still find 2 open channels, then the rcvr will find the guid that it is bound too.
Posted on: 7/2/2009 1:35 PM by Author "danny03"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=8901040
RE: Scale Accessories.. how do they do that?
Most of the scale accessories are scratch built. The materials range from foam, plastic, wood, brass, etc. methods range from free forming by hand, to vacuum forming, to making by molds (molds are hand made also). So you are pretty much limited to how you make 'em by your imagination and your pocketbook.
Posted on: 6/29/2009 6:50 PM by Author "danny03"
in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=8892095
RE: Evolution 26cc
Thanks Pe
Posted on: 6/18/2009 5:27 PM by Author "danny03"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8862873
Evolution 26cc
Does anyone know what size of metric screw is used to mount the ignition sensor?
Posted on: 6/18/2009 12:54 AM by Author "danny03"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8861151
RE: What do you think caused this crash???
You may want to send the Transmitter and receiver in to the Mfg, or an authorized Repair Shop. They can examine both and check for any defects and make any necessary repairs. It may cost a little but then you should have a peace of mind about those two components.
Posted on: 6/7/2009 9:44 AM by Author "danny03"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=8832266
RE: Not worth fixing?
To rebuild or not to rebuild? I would rebuild in a heart beat. Set it aside for a few days and then take another look and you will see that it is really not as bad as it first appears to be.
Posted on: 5/31/2009 8:52 AM by Author "danny03"
in the forum "Crash & Rebuild"
http://www.rcuniverse.com/forum/fb.asp?m=8813239
RE: scratch building 101....tips please..
If you already have a set of plans, then look at them and see if they have the necessary profiles (Ribs, Formers, etc.). If they do then... 1) make at least two copies of the plans, 1 will be to build on, 1 will be sacrificed for the profiles, and the last set will be for safe keeping. once you have the copies verify that there is no shrinkage when compared to the original. 2) go ahead and cut out all of your profiles and mark on them how many will be needed. 3) If you have 10 ribs that are the same, then you will need to cut 10 slighty oversized wooden blanks, lighty tack these blanks and stack them on top of one another, attach the appropriate paper template (profile) with spray adhesive. 4) Now you can cut, sand, shape according to the profile. This can be done on any part as long as they are the same shape, otherwise you are stuck with cutting out each individual part.
Posted on: 5/2/2009 9:12 AM by Author "danny03"
in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=8733922
RE: Proper prop balancing
I use a little different method. I like to spray paint my prop tips to increase visibility while the engine is running. All I do is just add a quick spray to the lite blade until it balances.
Posted on: 2/16/2009 8:39 PM by Author "danny03"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=8484478
RE: 26 GT Problem
You can do 1 of 2 things. 1) remove prop, use a socket that will slip over the crankshaft and rest against engine housing, tighten prop nuts until crannkshaft is reseated. or 2) ship to horizon for warranty repair. This happened to my evolution 26 cc and i opted for #1. then about 2 weeks later I called horizon and notified them of what had happenned and they had me send it in for repair. I got the engine back in 2 -3 weeks along with a listing of parts that was replaced.. The same problem is also happening on the MVVS 26cc.
Posted on: 11/10/2008 6:06 PM by Author "danny03"
in the forum "MVVS Support"
http://www.rcuniverse.com/forum/fb.asp?m=8134141
RE: JR White TX Charge Lead
try http://www.maxxprod.com/mpi/mpi-5.html item # 2803. you may have to solder banana plugs to the oppisite end.
Posted on: 9/19/2008 11:57 PM by Author "danny03"
in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=7971905
RE: A Finer Edge Mfg. Starter Adapter
just to let you know, your link does not work.
Posted on: 7/15/2008 5:24 PM by Author "danny03"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=7734425
RE: power wheels charging
4ah is the capacity. 4 ah is the same as 4000 mah and 1/10 of 4000 is 400 mah.
Posted on: 7/6/2008 6:32 PM by Author "danny03"
in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=7699966
RE: Inexperience Pilot + Bad Field = Lose of nose gear
A glued in wooden dowel can be redrilled if needed, which I do not believe that you could do that to automotive body filler.
Posted on: 5/16/2008 8:24 AM by Author "danny03"
in the forum "Crash & Rebuild"
http://www.rcuniverse.com/forum/fb.asp?m=7502736
| 
