RE: Himax 6330-F3A Pattern Motor
[quote]ORIGINAL: Hans Meij [quote]ORIGINAL: dapan The batteries are new only four flights and the c rating are 20 [/quote] Is this the one? http://www.hobbycity.com/hobbyking/store/uh_viewItem.asp?idProduct=9365 Bought it recently myself for its low price. It does have an internal resistance that is relative high. I expect this to be the main cause. [/quote] Yes this is the baterries i buy
Posted on: 11/19/2010 12:52 PM by Author "dapan" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10145519

RE: Himax 6330-F3A Pattern Motor
The batteries are new only four flights and the c rating are 20
Posted on: 11/19/2010 6:58 AM by Author "dapan" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10144907

RE: Himax 6330-F3A Pattern Motor
i have read this thread many times and all of you reading with 21x14 apc prop about 6000rpms why i have read 5600 rpms with my set up? (6330- cc hv 80a - zippy 4000mah) Also mine apc 21x14 is 130gr not 109....
Posted on: 11/18/2010 4:03 PM by Author "dapan" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10143330

RE: Europa S Pro
Happy flights Alex Very good airframe !! and good weight!
Posted on: 8/15/2010 3:48 PM by Author "dapan" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=9935305

RE: Himax 6330-F3A Pattern Motor
Everette(or anyone else) can you tell me please the true weight of Zippy Flghtmax 4400mah 5s 15C batteries ?
Posted on: 8/14/2010 5:32 PM by Author "dapan" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=9933448

RE: Himax 6330-F3A Pattern Motor
i ll try to do my best for the weight thats the reason that i am looking for the props weight My plane with 2x 9650 elevators 2 x 9152 ailerons 1x 9151 rudder motor 6330 (with spinner, prop[apc] but without cut the wires), CC HV 80 (without cut the wires), receiver extension cables are 3970gr i need 15gr for digiswitch , 1000gr for batteries, and 50gr for rx battery so the total weight are 5035 if i can save 40gr to 50gr from prop and 20gr from wires i thing its ok I have decide to use ZIPPY Flightmax 4000mAh 5S1P 20C batteries from HC cause none else have similar batteries with similar weight. (499gr including wire, plug & shrink wrap) If the p11 need 3200 to 3800 mah in windy day i believe that with our program need lower than 3000 mah Thanks for your encourage Padelis
Posted on: 8/8/2010 7:46 PM by Author "dapan" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=9919528

RE: Himax 6330-F3A Pattern Motor
Take Off Sequence Reverse Cuban Eight Stall Turn, ½ Roll Slow Roll Half Square Loop, ½ Roll 45ο Down Positive Snap Roll Humpty Bump w/Options Four Point Roll Half Loop Square Horizontal Eight – Inv. Entry Two Turn Inverted Spin Double Immelmann, Full Rolls Top Hat, ¼ Rolls Figure “M�, ¾ Rolls Stall Turn, Full Roll Up Two of Two Point Rolls - Opposite Direction Immelman Turn Three Turn Spin Landing Sequence this is the all program in b category in my country
Posted on: 8/8/2010 5:57 PM by Author "dapan" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=9919332

RE: Himax 6330-F3A Pattern Motor
I was flying one local Greece category not so difficult and not so long as P11 Its my first e pattern plane and not my first e plane and not my first pattern plane [;)] I thing i can manage the throttle good enough The problem with the weight revealed when my os 140rx engine burn out in take off The landing was pretty good but sixth runway, and unfortunately there was a trend that made the aircraft to break, so in the repair of necessity to strengthen the broken fuselage with the paint i had add about 180 gr Ι have decide to fly the airplane with 2 5s 4000mah battery (1000gr) but i want to fly the plane as possible lighter
Posted on: 8/8/2010 5:53 PM by Author "dapan" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=9919321

RE: Himax 6330-F3A Pattern Motor
Thanks to your fast reply i had already send email to PT models in Czech guy and he reply to me immediately now i must decide which prop is better to fly. 21x14 20x13 20,5x14 or 21x13??
Posted on: 8/8/2010 5:29 PM by Author "dapan" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=9919276

RE: Himax 6330-F3A Pattern Motor
hi all Please help me to save weight in my integral with MPI 6330 motor and cc hv80 speed control.. (my set up) I need to save about 50-60 gram and the only way that i am thinking is the prop weight cause apc e props are about 110gr I am looking for the MPI CF props and i cant find anywhere [&o] does anyone Know where i can find these props? Also need to know if anyone know The true weight of the Rasa folding props with the hub (yoke) thanks in advance Padelis
Posted on: 8/8/2010 2:29 PM by Author "dapan" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=9918905

Dolphin wax
Hi all Can anyone tell me how can i use this product to making a mold ? dapan
Posted on: 3/20/2009 5:41 PM by Author "dapan" in the forum "Composites Fabrication And Repair"
http://www.rcuniverse.com/forum/fb.asp?m=8598292

RE: Racing Helmets:
this is my racing helmet.... dapan
Posted on: 3/13/2009 6:22 PM by Author "dapan" in the forum "Q-500 Racing"
http://www.rcuniverse.com/forum/fb.asp?m=8574933

RE: Nelson LS Best Set up
hi and thanks for the answers i am interesting to know for Q500 engine who runs 15% nitro not for Q40 Thanks again dapan
Posted on: 8/4/2008 12:07 PM by Author "dapan" in the forum "Q-500 Racing"
http://www.rcuniverse.com/forum/fb.asp?m=7807055

Nelson LS Best Set up
Hi Did anyone know the best set up for this engine? dapan
Posted on: 8/3/2008 11:25 AM by Author "dapan" in the forum "Q-500 Racing"
http://www.rcuniverse.com/forum/fb.asp?m=7803157

RE: Best engine
The Quickie Jett is similar to Nelson engine and don't have idle ... if this engine stopped in flight maybe you need to set your needle valve better, also, check your tank, i always use Tetra bubble less fuel tank in my Nelson engines. dapan
Posted on: 7/18/2008 2:23 PM by Author "dapan" in the forum "Q-500 Racing"
http://www.rcuniverse.com/forum/fb.asp?m=7745441

RE: NINJA Q-500, Ready To Ship, Tip and Techniques
thanks Darrol in my other Quickies i use all the elevator at the No1 so i make the same and with the Ninja i asking ti know this parameter cause its i think its critical to start trimming with recommended throws Regards Dapan
Posted on: 7/5/2008 3:00 AM by Author "dapan" in the forum "Q-500 Racing"
http://www.rcuniverse.com/forum/fb.asp?m=7695698

RE: NINJA Q-500, Ready To Ship, Tip and Techniques
hi all did anyone know the ailerons and elevator throws and the correct CG ? thanks dapan
Posted on: 7/3/2008 3:32 PM by Author "dapan" in the forum "Q-500 Racing"
http://www.rcuniverse.com/forum/fb.asp?m=7690502

RE: Ninja 500
yes this help..!!!![;)][;)] Thanks!
Posted on: 6/22/2008 12:47 PM by Author "dapan" in the forum "Q-500 Racing"
http://www.rcuniverse.com/forum/fb.asp?m=7647603

RE: Ninja 500
hi all can anyone tell me what size plug tap i must use for the nylon screws for Ninja ? Thanks dapan
Posted on: 6/21/2008 6:29 AM by Author "dapan" in the forum "Q-500 Racing"
http://www.rcuniverse.com/forum/fb.asp?m=7643930

RE: Ninja 500
did you know the laps time? and with witch engine he fly the Ninja?
Posted on: 6/11/2008 12:14 PM by Author "dapan" in the forum "Q-500 Racing"
http://www.rcuniverse.com/forum/fb.asp?m=7607258

RE: OS 140 question?
hi i dont want to post a new thread for this engine but i have a new os140 rx and i can found the right idle set up... any ideas? Padelis
Posted on: 4/11/2008 2:27 PM by Author "dapan" in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=7366348

RE: Ninja 500
daven the slingshots you can buy only for Darrol not from Bruce. dapan
Posted on: 3/23/2008 5:13 PM by Author "dapan" in the forum "Q-500 Racing"
http://www.rcuniverse.com/forum/fb.asp?m=7270688

RE: Ninja 500
hi At the pass i have fly shotgun (my first composite plane )and slingshot its good planes but we didnt have the stability of the Neme Q+ for 2008 i already have one NemeQ+ one Vortex (with Rady Etken composite fuselage and tail) and one slingshot. Cause Nationals is at October i putt my name in profi list to buy two Ninja. dapan
Posted on: 3/23/2008 2:44 AM by Author "dapan" in the forum "Q-500 Racing"
http://www.rcuniverse.com/forum/fb.asp?m=7268216

RE: Ninja 500
yes it looks like Bruce de Castel quickies but SlingShot cost 585$ and Ninja 399$...[:D][:D]
Posted on: 3/22/2008 7:09 PM by Author "dapan" in the forum "Q-500 Racing"
http://www.rcuniverse.com/forum/fb.asp?m=7266385

RE: Ninja 500
1:06 in fai course i think is veryyyyy good time for Q500 plane... did anyone know the engine who run the Ninja? dapan
Posted on: 3/22/2008 12:43 PM by Author "dapan" in the forum "Q-500 Racing"
http://www.rcuniverse.com/forum/fb.asp?m=7264944

RE: Ninja 500
www.flycontrolline.com if you search....[8|][8|]
Posted on: 3/22/2008 10:29 AM by Author "dapan" in the forum "Q-500 Racing"
http://www.rcuniverse.com/forum/fb.asp?m=7264444

RE: Ninja 500
hi daven did you have any site for this airplane? dapan
Posted on: 3/22/2008 9:55 AM by Author "dapan" in the forum "Q-500 Racing"
http://www.rcuniverse.com/forum/fb.asp?m=7264353

RE: Futaba Servos
hi 900mah sanyo eneloop aaa are my choice dapan
Posted on: 3/16/2008 3:29 AM by Author "dapan" in the forum "Q-500 Racing"
http://www.rcuniverse.com/forum/fb.asp?m=7232181

RE: Futaba Servos
9650 on elevators and ailerons. 3101 on throttle
Posted on: 3/10/2008 4:00 AM by Author "dapan" in the forum "Q-500 Racing"
http://www.rcuniverse.com/forum/fb.asp?m=7202171

RE: Impact
hi my impact is 5100gr and i am thinknig to cansel the cf tunel to go at 5000gr can anyone tell me how importand is the tunnel for the plane? thanks dapan
Posted on: 2/9/2008 5:32 AM by Author "dapan" in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=7047487