|
RE: Need Engines
I have been relieved of all of the engines shown . bought by a friend on this forum almost as soon as I posted my comments. My thanks to those of you who sent me PM's and wish that I had enough to go around but unfortunately I'm now out of stock. Dennis
Posted on: 5/21/2013 1:01 AM by Author "dennis"
in the forum "Everything Diesel"
http://www.rcuniverse.com/forum/fb.asp?m=11517936
Need Engines
need engines Generally diesels don't do too well on the RCU classified section . I have a few that I have to get rid of and if you have needs then shoot me an email and let me know.
Posted on: 5/20/2013 10:21 AM by Author "dennis"
in the forum "Everything Diesel"
http://www.rcuniverse.com/forum/fb.asp?m=11517244
engines for fiery
I'm curious to see if a pdf will post. If so enjoy Dennis
Posted on: 9/12/2012 4:19 PM by Author "dennis"
in the forum "Everything Diesel"
http://www.rcuniverse.com/forum/fb.asp?m=11224586
RE: morning group
Hi martin Dennis
Posted on: 9/12/2012 12:49 PM by Author "dennis"
in the forum "Everything Diesel"
http://www.rcuniverse.com/forum/fb.asp?m=11226382
RE: Looking for Goldberg Skytiger Plans
Goldberg had passed to Bubba Spivey at Lanier and then to Great Plains when Lanier was sold to them. Doubtful that they sell plans separately from kits but i guess that you could try. Dennis
Posted on: 9/10/2012 9:23 AM by Author "dennis"
in the forum "Golden Age, Vintage & Antique RC"
http://www.rcuniverse.com/forum/fb.asp?m=11223773
RE: Another mystery engine
Fox 09 Rocket introduced in 1958 at 4.95 .It was aimed at new modellers and wasn't a powerhouse. It was easy starting and the controls were safely back from the prop. Lots were sold but disappointment must have run high when compared the the K&B 09 and Enya 09. it's not a real collectable but if it's new in the box it has fetched up to $40.00 on fleabay.
Posted on: 9/9/2012 3:47 AM by Author "dennis"
in the forum "Golden Age, Vintage & Antique RC"
http://www.rcuniverse.com/forum/fb.asp?m=11222519
RE: OS 10 FP issue
Martin, I believe I have a head for both the FSR and the FP if Bob doesn't have what you need. Dennis
Posted on: 9/7/2012 5:44 PM by Author "dennis"
in the forum "Everything Diesel"
http://www.rcuniverse.com/forum/fb.asp?m=11221213
New Aeroworks 50cc P-51D Mustang
[center][size=3][b]The new 50cc P-51D Mustang "Gunfighter" is now available for pre-order! Be the first at your flying field to own this iconic 50cc WWII Fighter. [/b][/size] Aeroworks is proud to add the New 50cc P-51D Mustang to their line of QUICK BUILD Series Aircraft The Mustang P-51 was designed from the ground up to provide a True to Scale model with pre installed main retracts, retractable tail wheel and complete air system. Functional inner and outer main and tail wheel gear doors that are set from the factory for scale operation. Sequencer, air valves and valve servos are pre installed. Scale hinging, hidden control servos, sliding canopy and scale cockpit finish off the highly pre fabricated model. The large wing and flaps make it very stable and easy to fly. Sleek lines, rugged good looks and the instant Nostalgia are sure to make the Mustang your favorite model. The P-51D Mustang was designed from the ground up to provide a True to Scale, Manageable Sized, Highly Pre Fabricated, High Quality and Moderately priced Warbird SPECIFICATIONS Wing span 86 inches. Wing Area 1359 sq.in. Fuse Length 70" (Rudder to Front of Cowl) Fuse Length 75" (Rudder to Front of Spinner) Weight 22 to 24 lbs Cowl Width 6" Rudder Height with Tail Wheel 16" Engine 50cc Spinner Size 5� Radio 6 Channels minimum FEATURING Strong Light Weight Construction Complete and Detailed Instruction Manual on CD Pre Installed Main Gear Retracts Pre Installed Retractable Tail Wheel with Gear Doors Pre Installed Air Tank, Air Lines and Sequencer Pre Installed Servos for Sequencer Pre Installed Inner and Outer Gear Doors Pre Installed Tail Wheel Steering Sliding Canopy Bomb and Tank Drops Included Complete High Quality SAE Hardware Package Included Adjustable pushrods with centering nut Machined aluminum engine stand offs included Professionally covered in ULTRACOTE™ Pre-Hinged from factory (Ready to Fly) No gluing Scale Lines with Custom Cockpit Pre Mounted Fiberglass Cowl Pre installed and fuel proofed engine box Laser cut engine mounting templates provided Custom Throw Meter Included Extra Ultracote covering provided for small repairs 12 to 15 Hours assembly Time More pictures can be seen at: [size=5][b][link=http://www.aero-works.net/store/detail.aspx?ID=379]50cc P-51D Mustang "Gunfighter" [/link][/b][/size][center]
Posted on: 8/28/2012 3:16 PM by Author "Mark Dennis"
in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=11209495
RE: Best replacement for a worn OS40FP
type venturi fabricated but the OS or Enya needle valve assembly will fit fine. dennis
Posted on: 8/25/2012 3:12 PM by Author "dennis"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11205807
RE: Engine test reports
This was a lot of work to do. Thank you for this. I already got to relive a few memories reading a few of them. Again Thank you. Dennis
Posted on: 8/25/2012 3:05 PM by Author "dennis"
in the forum "Control Lines"
http://www.rcuniverse.com/forum/fb.asp?m=11205801
RE: Does anyone know what this is?
[quote]ORIGINAL: MX240 wish I could turn in circles like that now without falling over ....................................... Ya, that would make two of us! I was a Flite Streak fan myself....went through a bunch of them to learn flying up-side down. :( Sure wish I had my old Johnson Stunt Surpeme 35 yet? Jim [/quote] Having built and flown both the Ringmaster and the Flite Streak with a leaning to the Streak because of it's better flying habits I jumped into the bigger is better and built this one shown. A kit by Pat king with a 61.5 W/S 985 sq in W/S with an Evolution NX60. It weighs 66 oz and flies better then you can imagine. Some things really do appreciate with age especially when they grow up. Next up is the Ringmaster 1000
Posted on: 8/20/2012 7:15 PM by Author "dennis"
in the forum "Golden Age, Vintage & Antique RC"
http://www.rcuniverse.com/forum/fb.asp?m=11200354
RE: webra 32 carb help
made some of the best engines ever produced for the modelling public. Dennis
Posted on: 8/16/2012 4:52 PM by Author "dennis"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11196245
30cc Freestyle Extra 260 QB-L Now In Stock!
[size=4][center]The 30cc Freestyle Extra 260 QB-L is now in stock and will begin shipping soon! Be sure to take a look at our behind the scenes look of the airplanes arrival on our Facebook page: [link=http://www.facebook.com/AeroworksRC]Aeroworks Facebook Page [/link] For more pictures, the complete manual and ordering info, visit our website at: [link=http://www.aero-works.net/store/detail.aspx?ID=518]30cc Freestyle Extra 260 QB-L [/link][/center][/size]
Posted on: 8/16/2012 1:27 PM by Author "Mark Dennis"
in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=11196046
RE: TROY BUILT MODELS
[quote]ORIGINAL: predman I understand inflation, but for me to ship the same box back to them priority mail cost me $14.60, them to me $38 [/quote] Predman, Please understand that I am not trying to defend TBM but I feel as though you all could use a perspective from someone who has been in the ARF business for a few years. Shipping rates have gone up tremendously, not just in the cost of shipping the item from the retail center to the consumer but also from China (Or wherever the product is made) to the retail center/warehouse. The boxes that are used to ship these items in have doubled if not tripled in recent years as well. These increases also do not account for the time it takes to process the order; someone has to process, pack, and ship the item. There is also at least a 3% charge on credit card transactions, not to mention the fees that may be associated with different card types. Larger companies may be able to ship items at a slightly lower rate to the customer due to their shipping volume and their discount amount. It also depends on the size of the box, one inch in any dimension can instantly bump the package up to the next "Oversize" level, instantly adding $30.00+ to the cost of shipping. Shipping prices can also vary depending on where the airplane is shipped, this can change the cost of shipping any item by 10-30%. All of the things I mentioned above must go into the calculation of shipping charges, it is not as simple as slapping a label on a box and sending it wherever. I think you will also find that many companies loose money on shipping rates and are in no way making extra profit from the lower than needed shipping charges. Once again, please understand that these are my personal opinions and observations and should not be linked to any company in particular. Mark
Posted on: 8/9/2012 9:27 AM by Author "Mark Dennis"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11186986
RE: Header Drop on 50cc Yak ?? PROP ??
Rick, You will need a 25mm drop double bend flex header. As for the prop sizes, I would start with a 24x8, that should do very well for break in. Mark
Posted on: 8/6/2012 7:15 AM by Author "Mark Dennis"
in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=11182751
RE: Club FOX!
engine. did the MVVS 09'yet. Dennis
Posted on: 8/5/2012 6:22 PM by Author "dennis"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11182240
RE: Anyone have older Tower Hobbies catalogs? Hangar 1 F-105.
The F-106 was a turd. Dennis
Posted on: 8/1/2012 12:16 PM by Author "dennis"
in the forum "Golden Age, Vintage & Antique RC"
http://www.rcuniverse.com/forum/fb.asp?m=11177415
RE: glow plug thread
Micro fasterners sells the tap,die and drill bit. Costs are $9.55,$5.05 and $1.45. These guys are my priority go to place for all stuff with screws. Not an add but an endorsement (non Compensated) www.microfasteners.com Dennis
Posted on: 8/1/2012 8:52 AM by Author "dennis"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11177220
RE: thinning out kits, which one would you sell?
I Wish that I was only faced with the choice of 1 in 3 to go. After 60 years in the hobby I have over 200 and nowhere to go with anymore. Still intend to get all of them built before I go and would have a shot at it if I didn't keep adding to the collection. Keep the kits and tell the missus to take a breath and relax. Life is too short to carry on about something so frivolous as a kit.
Posted on: 7/29/2012 3:20 PM by Author "dennis"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11173648
RE: IRVINE ENGINES NEW OS MADE
OS to the best of my knowledge did not make any Mills engines. If my memory still works production of the Mills engines ceased when production of Irvine engines left Great Britan for Japan.
Posted on: 7/28/2012 4:08 AM by Author "dennis"
in the forum "Everything Diesel"
http://www.rcuniverse.com/forum/fb.asp?m=11172025
RE: evolution 36 control line
[quote]ORIGINAL: flier81 Hi dennis thanks for the info but i need i size of the hole the venturi goes in. thanks [/quote] Same size as a GMS 40. Dennis
Posted on: 7/27/2012 5:24 PM by Author "dennis"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11171709
RE: evolution 36 control line
your time Dennis http://www.stunthanger.com/lee_machine_shop.htm
Posted on: 7/27/2012 5:56 AM by Author "dennis"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11171009
RE: OS10LA carb question
The OS10FP carb is not a direct replacement as it is a little longer and if my memory is correct the screw holes might be compromised. Also if you want to replace the leaking backplate the 10FP backplate does not fit as the LA10 was redesigned and the liner drops further down . Dennis
Posted on: 7/22/2012 7:52 AM by Author "dennis"
in the forum "Everything Diesel"
http://www.rcuniverse.com/forum/fb.asp?m=11164404
RE: Does anyone know what this is?
and get a Ringmaster fix. Dennis
Posted on: 7/21/2012 4:06 PM by Author "dennis"
in the forum "Golden Age, Vintage & Antique RC"
http://www.rcuniverse.com/forum/fb.asp?m=11163836
RE: Modella 12( MMVS)D
[quote]ORIGINAL: AMB Muffler bolt issue solved found 2 screws that project about 2mm past muffler lugs, will make a lock bar for compression screw have the metric taps and flat stock martin [/quote] Martin, Isn't it great to have Christmas in july. Glad you like the engine. Dennis
Posted on: 7/19/2012 4:55 PM by Author "dennis"
in the forum "Everything Diesel"
http://www.rcuniverse.com/forum/fb.asp?m=11161718
RE: K&B Twister .61 RC Engine
Make sure that you use a strap to support the tuned muffler. Otherwise you run the risk of breakage. Dennis
Posted on: 7/13/2012 10:43 AM by Author "dennis"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11153915
RE: MVVS 09 diesel
of my vehicles smelling like an operating room. Dennis
Posted on: 7/11/2012 1:04 PM by Author "dennis"
in the forum "Everything Diesel"
http://www.rcuniverse.com/forum/fb.asp?m=11151636
RE: Help covering scalped trailing edges
Scalloped trailing edges were not a design feature of those WW1 and post war era aircraft. It was caused by the shrinkage of the covering between the bays. The trailing edge of those planes were thin with a wire reinforcement and the scallop while not intentional made lot of those planes a lot more interesting looking. Fabric coverings are a bit easier to get to work on these trailing edges,however you have been given some good advice on covering with plastic to get acceptable results. Just take your time at the tip of each scallop. Badly done they will make your model look like crap.
Posted on: 7/9/2012 4:31 PM by Author "dennis"
in the forum "Tips & Techniques"
http://www.rcuniverse.com/forum/fb.asp?m=11149203
RE: Aeroworks 4th of July SALE!!!!!!!
We have elected to extend the 4th of July sale through Friday July 6th! Orders can be placed online or over the phone using the coupon code to receive the 10% discount. Please visit our Facebook page to receive the coupon code.
Posted on: 7/5/2012 8:37 AM by Author "Mark Dennis"
in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=11143875
RE: Aeroworks Yak54 50cc build issues
[quote]ORIGINAL: captinjohn Nice video with a nice landing ....about 11 - 12 min later.  Do you know if this 50cc Yak is set-up for a tunned muffler like on a Dessert Aircraft 50cc engine. If it does not have a tunnel....would it be hard to build one into it? Like a big modification.  Thanks   Capt,n [/quote] John, The 50cc Yak has a full length pipe tunnel that can except just about any tuned pipe or canister system. Here is a picture from our website that shows a KS 1060 Tuned pipe installed. Please let me know if you need anything else. Mark
Posted on: 7/5/2012 7:37 AM by Author "Mark Dennis"
in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=11143782
| 
