RE: Boat Kit Manufacturers?
John, Thanks for the opinion. The Smit is one of the models I am considering. I think from a learning standpoint the wood models built from the ground up help understand the process and terminology. I am not in any hurry so I don't mind the extra time. This forum is great, there are some really talented people with a wealth of knowledge. Thanks again. Doug
Posted on: 2/21/2009 9:56 AM by Author "dlemo2000" in the forum "RC Scale Boating"
http://www.rcuniverse.com/forum/fb.asp?m=8501236

Boat Kit Manufacturers?
I am finishing my first build in the next month or so and want to purchase another kit. I my building the Jolly Jay from Dumas. It is all wood construction which is kinda fun to work with. The instructions could be better but overall not too bad. I am looking at a couple from Model Slipway, Caldercraft and Billings. Is one better quality than the other or all about the same? I see alot of them have fiberglass hulls already made. I know this will speed up the process but I liked building it from the ground up. Opinions would be greatly appreciated. Thanks Doug
Posted on: 2/20/2009 11:36 AM by Author "dlemo2000" in the forum "RC Scale Boating"
http://www.rcuniverse.com/forum/fb.asp?m=8498082

RE: Jolly Jay fishing boat
Thanks for the ideas. I did find a guy in Texas who built these things and guess what, they were all a lot longer and wider (18-22"). He patented the design and was going to kit it but must have had no takers. One of the features was a line cut system. Here is the link [link]http://findarticles.com/p/articles/mi_qa3918/is_200004/ai_n8893653[/link] "I'm gonna need a bigger boat" Doug
Posted on: 1/29/2009 7:10 AM by Author "dlemo2000" in the forum "RC Scale Boating"
http://www.rcuniverse.com/forum/fb.asp?m=8414912

RE: Jolly Jay fishing boat
I continued my research this morning and reached a conclusion that you all had already reached. Any fair size fish is gonna kick my boats butt. I viewed 4 or 5 videos on the web and unless the fish was about the size of a minnow, the boat struggled mightly and in all cases got wet. While this evidence doesn't kill the project, it does require some re=thinking on certian engineering aspects. My wife says I'm stuborn but I really just don't like to lose. Thanks for the heads up. Doug
Posted on: 1/28/2009 12:19 PM by Author "dlemo2000" in the forum "RC Scale Boating"
http://www.rcuniverse.com/forum/fb.asp?m=8411694

RE: Jolly Jay fishing boat
That cooling coil is neat. Whats the drive mechanism? Pump? While I'm asking do they make a little bilge pump? I have an extra channel on the controller, it may come in handy. Thanks Doug
Posted on: 1/26/2009 6:57 AM by Author "dlemo2000" in the forum "RC Scale Boating"
http://www.rcuniverse.com/forum/fb.asp?m=8402338

RE: Jolly Jay fishing boat
Video footage will be provided, good or bad. Probably not until April or May. The rock test is a good one to measure line strength and roll characteristics. If you want to see how much force is required to pull this boat under, try submerging a 1 gallon empty milk jug. The milk jub is about 1/3 to 1/4 the size of the boat by air volume. Toes fish could not pull it under. The boat will be most vulnerable to roll in a static position. I believe forward momentum is key. Is heat build up in the motor compartment a typical concern? The kit has a fake stack I was wondering if I should make it functional? Kay, your last line sums it up, It's all about the fun. Next up, a container ship fitted to be a portable cooler. Have fun. Doug
Posted on: 1/25/2009 7:33 AM by Author "dlemo2000" in the forum "RC Scale Boating"
http://www.rcuniverse.com/forum/fb.asp?m=8398328

RE: Jolly Jay fishing boat
[quote]ORIGINAL: toesupwa [quote]ORIGINAL: dlemo2000 My plan is to actually fish with this boat. [/quote] Oh dear... This 'idea' has been discussed on several model boat forums in the past... Some points to consider.. Is it considered 'legal' by F&G in your State?.. If the F&G officer thinks what you are doing is illegal, they have the right to confiscate all of your
Posted on: 1/23/2009 7:43 AM by Author "dlemo2000" in the forum "RC Scale Boating"
http://www.rcuniverse.com/forum/fb.asp?m=8391039

RE: Jolly Jay fishing boat
My plan is to actually fish with this boat. I live on a 6 acre pond and thought this would be a challenging build. My current plan is to rig a winch system combined with a portion of an old fishing rod. I think I will try and use the mast and swing arm section for the rod holder. The winch drive is the head from a cordless screwdriver (6 volt). I will use a ESC to control the retreival / "cast" speed. My current concerns are how much balast will be required and how to keep a low center of gravity. I am considering making the rod swivel for when the fish runs and utilizing some small springs to take some of the force out of the shock. On the early trials I plan to use foam pipe insulation around the open deck area to help insure I don't get too much lean. Waterproofing the main deck to minimize any seepage to the lower hull are also under consideration. Lot of questions that I have to make up answers as I go along. If this works I will build another one for my buddies and start an "old lazy man high tech fishing league" Doug
Posted on: 1/22/2009 9:22 AM by Author "dlemo2000" in the forum "RC Scale Boating"
http://www.rcuniverse.com/forum/fb.asp?m=8387346

RE: Jolly Jay fishing boat
Thanks for the info. The link was very helpful. I assume ESC stands for electronic speed control (don't know all of the terms yet). The idea on the drill is excellant. Getting ready to glass the hull. I am sure there will be more questions. Have a good day. Doug
Posted on: 1/14/2009 5:53 AM by Author "dlemo2000" in the forum "RC Scale Boating"
http://www.rcuniverse.com/forum/fb.asp?m=8356421

Jolly Jay fishing boat
I am a newbie to this hobby and this is my first build. I am building this kit to be a "working" fishing boat. By working, I mean to install a winch type system which will reel in the fish. I have a few questions I hope someone can offer suggestions: 1. The kit came with a 4.8v motor. The boat is 24" long. Is this big enough? I don't need to go fast but do not want to be under powered. 2. Any ideas on what kind of gearing or motor system to power the winch? My current thought is an additional motor and speed control using a 4 channel remote, but I am worried about room and weight. The winch will be built with an old baitcasting spool and gears. I think I need a low speed, higher torque drive (and small) 3. Can a battery power more than one thing at a time. Any thoughts would be a help. Thanks
Posted on: 1/13/2009 7:39 AM by Author "dlemo2000" in the forum "RC Scale Boating"
http://www.rcuniverse.com/forum/fb.asp?m=8352803