RE: How to flat spot pins
Thanks for the suggestions the responses have been very helpful. I am going into the shop and try the drum sanding method
Posted on: 8/23/2012 4:54 AM by Author "dos007" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11203096

How to flat spot pins
This seems easy enough but I hate grinding flat spots on retract pins. Normally I stay away from pins but I purchased the carf landing gear for my ultra lightning, must have had a weak moment. So how do you guys do it? I tried drilling but the hardened steel is impossible, then I tried grinding with a Dremel tool. This worked but I have too much play also keeping them with the same toe-in is almost impossible. Any suggestions besides buying new gear?
Posted on: 8/22/2012 12:24 PM by Author "dos007" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11202351

RE: C-ARF Ultra Flash build Thread + Video
I did my maiden yesterday. It was a beautiful 4 second flight. The plane was destroyed in a blink of an eye. After take off I had to turn left to avoid 8' tall sugar cane as I fed in left it went hard right and just caught one of the biggest stalks in the field. Lesson learned 1) don't rush to get your maiden in before you go to a doctor's appointment 2) don't answer text messages while on the runway trying to start your plane 3) when building double check all control throws 4) the pilot is responsible to check all control surfaces before the flight. I checked elevator, rudder, nose wheel, flaps, answered text message then took off....crashed. Ailerons were reversed! My BAD.
Posted on: 8/17/2012 10:01 AM by Author "dos007" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11196914

RE: Larger pipe for FEJ F-15 1:7 / P-200SX
I run an AMT Oly in mine and yes the pipe is slightly bigger, better quality, and causes less power loss. Tam is familar with the plane and got me my pipe in less than 2 weeks.
Posted on: 8/11/2012 7:17 AM by Author "dos007" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11189238

RE: Larger pipe for FEJ F-15 1:7 / P-200SX
I have the same plane and got a pipe from Tam.
Posted on: 8/11/2012 3:51 AM by Author "dos007" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11189086

RE: PENSACOLA JETS 2012
I will be there and help out any way I can. I guess there was no way to hold the event at Santa Rosa...it is so much nicer there!
Posted on: 8/9/2012 2:13 PM by Author "dos007" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11187318

RE: Skymaster F-100
It is hard to understand that no one has experience with the Skymaster F-100. BVM's is well known, flies great, but is 4 times the price. Maybe Anton could speak of the number sold recently or someone who has built and flown one will chime in!
Posted on: 7/30/2012 2:35 PM by Author "dos007" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11174935

RE: WOW!!! EVOJET 180VX
Do you have any more flights on your evo 180vx? Do you still like the performance?
Posted on: 7/24/2012 7:53 PM by Author "dos007" in the forum "EvoJet Direct Support"
http://www.rcuniverse.com/forum/fb.asp?m=11168072

RE: FLY EAGLE JET models 2012
Will Fly Eagle have a display tent of their planes at Kentucky Jets
Posted on: 7/6/2012 4:53 AM by Author "dos007" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11144999

RE: Do you charge your batteries while left in your plane?
I can't get the poll buttons to appear...any suggestions?
Posted on: 6/20/2012 1:07 PM by Author "dos007" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11125558

RE: Do you charge your batteries while left in your plane?
I have always charged my LI-IONS in the plane. I leave my planes in a trailer in my garage and I even charge overnight. I wanted people to vote on but for some reason its not working which is probably something I have done wrong. What prompted me to do the poll was a fellow jet flyer just lost a couple of planes due to a battery fire. The battery was a lipo. I am completeing a 1/7 f-15 and was about to stuff the batteries in the nose, but started getting second thoughts. So no stupidity Murdock just trying to see what what most people do. I will continue to charge the batteries while in the planes but will no longer do them unattended. I may even start taking them out...safety first. There are a lot of things we take for granted with our jets.
Posted on: 6/20/2012 1:04 PM by Author "dos007" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11125554

RE: Do you charge your batteries while left in your plane?
I am not sure why the poll is not working. Any suggestions? It does look like most charge in the plane and most use A123.
Posted on: 6/20/2012 11:07 AM by Author "dos007" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11125396

Do you charge your batteries while left in your plane?
With the recent battery discussions (and fires) at our club I am curious where most people charge their batteries...in the plane or take them out.
Posted on: 6/19/2012 9:11 PM by Author "dos007" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11124688

RE: Comp ARF BAE Hawk build thread
So what is the prefered method for securing the pins? 1) File flat spots on the pins, or 2) Drill holes on the pins for the retaining bolt to grip
Posted on: 5/29/2012 4:47 PM by Author "dos007" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11099131

RE: Comp ARF BAE Hawk build thread
My issue with the pins is that I find grinding the flat spots to be a real pain in trying to get the wheel lined up correctly. I like the look of the C-ARF struts though.
Posted on: 5/28/2012 2:53 PM by Author "dos007" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11097681

RE: Comp ARF BAE Hawk build thread
I too would like to buy this jet but I do not like main gear struts that have pins. Did any of you come up with a good alternative to the gear C-ARF supplies? Todd (Dreamworks) have you got anything in the prolink or electron that will work for this plane?
Posted on: 5/28/2012 12:54 PM by Author "dos007" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11097559

RE: CARF or Skymaster
I have built and flown both SM, C-ARF and Extreme Jets (lower line of SM). The Extreme jets is a cheaper line for SM and the quality or lack of shows up. The BVM supplemental instructions are great as are some of the parts upgrades from BVM. The SM line lacks instructions which is OK if you have built a few jets or have someone to lean on for help. I have built 2 Extreme Jet, 5 C-ARF and 2 SM. The C-ARF is good instructions, most are built very well, no re-engineering. The planes that I have from all three brands fly great. Replacement parts is really where the rubber meets the road. I get quick responses from C-ARF (Andy Kane), quick delivery, and resonable pricing on the replacement parts. SM on the other hand requires numerous phone calls just to get parts on order. I don't think I will order any more Extreme Jet planes but I will continue to order both C-Arf and SM kits. If C-Arf offered more scale planes I would probably just stick with them. I just ordered a Ultra Flash and I am thinking about ordering another SM kit. BTW, BVM is great quality and I just wish they made a bigger F4 or F100:)
Posted on: 5/15/2012 7:53 AM by Author "dos007" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11081442

RE: Maj. Woody's X-Treme Jets BAE Hawk 1/5.5
I just had the same issue on a Panther, the right flap would not work and upon inspection I found the dubro arm was slipping on the spline. Fortunately for me it happened on the taxi in from a flight.
Posted on: 5/13/2012 6:52 AM by Author "dos007" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11078951

RE: Fei-Bao 1/7th F-15 Build
OK this is the build that just keeps on giving...but from what everyone says is that it flies great! I have installed my elevators and after tightning the bolts I still have a little play in the surface. the pin is not quite the same width as the notch in the elevator rod. It is not much play but I am just wondering if you guys had this and did you leave it alone or is there a fix? Also my pipe is too long so it looks like I will cut it down some and then cut the inlet ducting as well. The big old OLY takes a lot of room!
Posted on: 4/25/2012 8:44 AM by Author "dos007" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11056117

RE: Dreamworks Takes on Fromeco....
I would like to see you stock Lithium Ion batteries with EC3 connector and balance plug. BTW which ever battery you stock make sure to stock a simple method (cable) to charge the battery w/o removing from the plane.
Posted on: 4/25/2012 7:54 AM by Author "dos007" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11056055

RE: Fei-Bao 1/7th F-15 Build
Gemeral. thanks for the feedback...I look forward to meeting you at Kentucky Jets.
Posted on: 4/24/2012 5:49 AM by Author "dos007" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11054697

RE: Fei-Bao 1/7th F-15 Build
I orderd the e-rams this morning and will use those on the canopy and speed brake. Does anyone have pictures of their rudder servo install? Is a JR 9411 enough on the rudder?
Posted on: 4/22/2012 7:13 AM by Author "dos007" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11052023

RE: Fei-Bao 1/7th F-15 Build
What servos are you guys using for the rudders. I was going with 8411's but they don't fit, at least not with out a lot of cutting.
Posted on: 4/22/2012 12:07 AM by Author "dos007" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11051803

RE: Fei-Bao 1/7th F-15 Build
I am going with a single setup...AMT OLY. I hope lewis chimes in with some sugeestions. I wanted to maiden this plane at the MAB meet in two weeks. Where did you get the electric rams?
Posted on: 4/21/2012 9:58 PM by Author "dos007" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11051749

RE: Fei-Bao 1/7th F-15 Build
Lewis and other F-15 builders, I am just starting my Fei Bao F-15E, the kit is one of the earlier models that I bought from Wagner when he was in business. After much delay I am finally get this thing built. I just wanted to know if there are any issues I should be aware of before the maiden flight. I had heard of the UC issue so I got new main retracts and a nose strut from GJC. I have read this thread and some others just trying to make the build a success. Recently on another thread, that was very old, someone stated a problem with the main wheels and brakes...is this something to be concerned with? Thanks for any help you can offer.
Posted on: 4/21/2012 5:35 PM by Author "dos007" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11051481

RE: Mike McConville jet flying!! NO WAY!!!
Mike, can you give us some insight on how to set up the gyros properly. I tried the 370a in a 3d plane and didn't like the feel. I would love to put them in a couple of my jets.
Posted on: 4/6/2012 5:03 AM by Author "dos007" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11030462

RE: mississippi afterburnr 2012
Can't wait
Posted on: 3/5/2012 9:24 PM by Author "dos007" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10988220

RE: Florida jets 2012.. Are we there yet?
Ali, I'll take my chances on the sticker sheet...so please bring one or two with you. I will arrive Thursday morning. I'll look you up if you don't find me first. Marty McGee
Posted on: 2/15/2012 12:06 PM by Author "dos007" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10960334

RE: Florida jets 2012.. Are we there yet?
Ali, what about the decals for the 2.0 Viper :)
Posted on: 2/15/2012 8:52 AM by Author "dos007" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10960057

RE: Florida jets 2012.. Are we there yet?
I am packed and ready to go. I just wish I had decals for the Viper. Ali, do you sell the decals like you had on your 2.0 SM Viper?
Posted on: 2/14/2012 3:12 PM by Author "dos007" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10959054