|
RE: Forum
Thanks for all the kind words! When I began this forum, I worked in our product support department and the forum was an extension of my job responsibilities. Around a year ago I moved into product development and with that over the last year my duties have increased such that I simply can't keep up with my job duties and support this forum. We understand how important support is to our customers, and I'm certain that our product support department will continue to provide outstanding service to all our customers.
Posted on: 3/25/2008 12:34 PM by Author "dsnyder"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=7280046
Forum
Due to growing work and time constraints I am unable to continue to support this forum. It has been my pleasure to support this forum over the last 6 years. Please contact our product support department at 877-504-0233 or email "productsupport@horizonhobby.com" for assistance with our products.
Posted on: 3/25/2008 9:48 AM by Author "dsnyder"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=7279327
Out of the office
Just an update, for some reason the posts I made yesterday on the forum have dissapeared when an update to the site was performed and unfortunetely I don't have time today to repost to answer all of the threads. I will be out of the office until the middle of next week as well and will be unable to post until then. I appologize for the delay, however my time is very short currently. If you need assistance please contact our service department at 877-504-0233 or email to "productsupport@horizonhobby.com".
Posted on: 3/4/2008 11:05 AM by Author "dsnyder"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=7172874
RE: Hitec Supreme FM Autoshift DC Receiver
A JR receiver will not work with a Hitec transmitter. A Hitec receiver that is made to be compatible with a JR transmitter will work.
Posted on: 2/25/2008 9:55 AM by Author "dsnyder"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=7133924
RE: AR-9000 problem...
For piece of mind, I would recommend sending the module and the receiver in for a check up.
Posted on: 2/25/2008 9:53 AM by Author "dsnyder"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=7133918
RE: 9100 will not power up
Have you bound the receiver to the TX with all remotes plugged in? What happens with the switch removed?
Posted on: 2/25/2008 9:50 AM by Author "dsnyder"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=7133907
RE: R1221 info
We will have images up on the web site soon.
Posted on: 2/25/2008 9:47 AM by Author "dsnyder"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=7133898
RE: Hitec Supreme FM Autoshift DC Receiver
Do you mean from one transmitter? If so, then as long as the receiver is Hitec compatible, then yes.
Posted on: 2/25/2008 9:46 AM by Author "dsnyder"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=7133894
RE: 2.4 Question
Were the lights flashing slowly or fast? If slowly, that could be an indication of a power problem. If fast, it is being put into bind mode somehow.
Posted on: 2/25/2008 9:45 AM by Author "dsnyder"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=7133887
RE: 9303 W SX600 BUDDY BOX & FLAPERONS
Yes it will, you will need to completely program the model in both systems.
Posted on: 2/25/2008 9:43 AM by Author "dsnyder"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=7133881
RE: 921 RX install & Extension's
The receiver installation looks fine.
Posted on: 2/25/2008 9:41 AM by Author "dsnyder"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=7133873
RE: Firmware upgrade instructions
http://www.horizonhobby.com/Content/Media/pdf/servicecenterchecklist.pdf There is no "re-binding" delay issue. Binding is done when initially setting up the receiver and there are no binding issues. I assume that you are speaking about this however: http://www.spektrumrc.com/Articles/Article.aspx?ArticleID=1756
Posted on: 2/25/2008 9:39 AM by Author "dsnyder"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=7133867
RE: JR/Spektrum 2.4 GHZ Failsafe
You asked if the 6 or 7 channel receivers have any other options, they do not at this time. What I said was correct. Smartsafe is used in all Spektrum aircraft receivers. The 9 channel receivers also have Preset failsafe which is where all channels go to the failsafe position. Thank you for your feedback.
Posted on: 2/25/2008 9:37 AM by Author "dsnyder"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=7133858
RE: AR9100 : 3 questions
You can charge while plugged into the receiver, however the receiver will draw a small amount of current at all times while the batteries are plugged in, so disconnect them if you are not flying for a few days.
Posted on: 2/25/2008 9:32 AM by Author "dsnyder"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=7133843
RE: What does Spektrum mean by "Park Flyer
I'm not familiar with the model mentioned, however the receiver is for slow and park flyer aircraft. If you have a model that you may operate at greater distances than flown with slow/park flyers, the AR6200 is a great option as the weight increase is marginal.
Posted on: 2/25/2008 9:31 AM by Author "dsnyder"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=7133838
RE: quick connect
Yes, it is available for everyone.
Posted on: 2/25/2008 9:28 AM by Author "dsnyder"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=7133835
RE: Help with programming an JR XP8103
You would need to send it in for this conversion.
Posted on: 2/25/2008 9:28 AM by Author "dsnyder"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=7133833
RE: Spectrum cordless link for simulator
Yes it will, and yes.
Posted on: 2/25/2008 9:26 AM by Author "dsnyder"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=7133826
RE: DX7 and pull pull setup
You would need to set the gear to gear mix to -100% in both directions (match the values of the travel adjust on the gear channel to cancel them). Then set the rudder to gear mix in program mix 4 (the DX7 only has 4 program mixes) and set the values to +100% in both directions.
Posted on: 2/25/2008 9:25 AM by Author "dsnyder"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=7133817
RE: AR7000 channel assignments
With the module installed it will use the same channel order as marked on the receiver.
Posted on: 2/25/2008 9:22 AM by Author "dsnyder"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=7133803
RE: Spektrum DX6i
The system is a Spektrum brand system throughout.
Posted on: 2/25/2008 9:20 AM by Author "dsnyder"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=7133798
RE: DX2 going into failsafe
What exactly is happening? If you are not able to locate the problem please feel free to send the system in for a check up.
Posted on: 2/25/2008 9:19 AM by Author "dsnyder"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=7133796
RE: Kudos to the Horizon Service Center!
Very good to hear! Thanks for posting!
Posted on: 2/25/2008 9:17 AM by Author "dsnyder"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=7133788
RE: battery voltage drop capacitor - please clarify
The Spektrum voltage protector is for 1/12 scale cars that use a 4 cell pack to power the ESC and generally the output of the BEC is low, so the voltage protector helps prevent power loss. This is ONLY for 1/12 scale electric cars, it won't do anything in any other applications.
Posted on: 2/25/2008 9:16 AM by Author "dsnyder"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=7133783
RE: alarm volume DX7
The only thing I would say to do would be to send the system in for a check up as there is no volume control.
Posted on: 2/25/2008 9:14 AM by Author "dsnyder"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=7133779
RE: JR/Spektrum 2.4 GHZ Failsafe
1) I can't speak to future products. I'm not sure what you mean by the ailerons going to full deflection on fail safe, all receivers have failsafe on throttle and all other channels hold the previous position. 2) There aren't any other 'settings' for the receivers.
Posted on: 2/22/2008 9:46 AM by Author "dsnyder"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=7117808
RE: DX-7 Bind button green light
The light should be on indicating it is operating. The power used is minimal, and like I mentioned, is a visual indicator that the system is operating.
Posted on: 2/22/2008 9:42 AM by Author "dsnyder"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=7117793
RE: Duel Rates with 2 servos on ailerons
You are using the flaperon function and plugging the ailerons into channels 2 and 6? And are you for sure using the dual rate function and not travel adjust or aileron differential? The dual rate function doesn't have the ability to limit throw in only one direction. Have you inhibited the flaps in the input select function? Also does this occur on the servo monitor as well as on the aircraft?
Posted on: 2/21/2008 10:41 AM by Author "dsnyder"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=7112605
RE: Dual receiver install
One remote per receiver is fine. Two remotes per receiver increases path diversity, which can improve system performance, however it is not necessary.
Posted on: 2/21/2008 10:36 AM by Author "dsnyder"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=7112585
RE: Trim values between 6102 and x9303
Using the same values will work, they may need some adjustment as the calibration etc can be different between the two systems. But they should be very close if not the same.
Posted on: 2/21/2008 10:35 AM by Author "dsnyder"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=7112582
| 
