RE: EZRUN s10 Problem
I was able to the higher numbers before using manual programming but now it will not go past 5 with manual or programming card. Under program function 4 I am only able to go to #4 before it cycles back to #1. I know hobbywing make a good product, just not sure what is going on.
Posted on: 2/8/2011 4:06 PM by Author "ebackus1" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10321849

EZRUN s10 Problem
I purchased a Redcat Volcano epx pro about a month ago and upgraded to 2s lipo by zippy. I used a programming card to attempt to change the setting of the ESC ( EZRUN s10)but it will not go past program function #5 before it cycles back to #1. According to the hobbywing site I should be able to access #1-10. Does anyone know what could be wrong my ESC? Any help would be greatly appreciated.
Posted on: 2/7/2011 7:10 PM by Author "ebackus1" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10319853

RE: Caldera 10e
Sorry the link did not work. I am still new on here. Understanding Lipos I reposted the link to see if I can get it to work.
Posted on: 1/27/2011 8:14 PM by Author "ebackus1" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10294439

RE: Caldera 10e
Do you know how I can get my hubs off my s30 volcano. Everyone of them appears to be stuck and striping the hex screw when I try to remove them. I bent a dogbone after getting the truck tuned and can not remove them. Any help would be greatly appreciated.
Posted on: 1/27/2011 7:57 PM by Author "ebackus1" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10294412

RE: Caldera 10e
You can actually do the esc setting without the card and it is not too difficult. I have a volcano exp pro and it came with NiMH battery that would act just like yours. After downloading the program instruction from hobbywing I realized that the esc was set for Lipo. I changed the setting to no voltage protection and it ran till the battery was dead. Download the pdf instructions on the the hobbywing site it is very easy to do. I just upgraded to the 2s 5000mAh 20C battery by zippy and what a difference. The power is there from the time you start till the cutoff voltage hits and it takes awhile. I had bought a good charger that does the discharge and charge and those two together worked wonders. I was able to get 2400mAh out of a 2000mAh battery, it helped for sure. Check out this link for help with understanding lipos it has great information. I am new to the hobby and still learning but soak up as much as possible on here. Hope this helps!
Posted on: 1/27/2011 7:32 PM by Author "ebackus1" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10294349

Volcano S30 Hub Removal
I bent a dogbone and I am having trouble removing the hex screw that hold the hub on. I used a 2mm hex wrench but it just strips out. I had the same problem on another wheel. Does anyone have a solution.
Posted on: 1/26/2011 6:34 PM by Author "ebackus1" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10291455

RE: ezRUN-S10 RTR Programming question
You can find the programming instruction on the hobby wing website. It is really easy to do.
Posted on: 1/24/2011 1:57 PM by Author "ebackus1" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10285298