|
RE: Tornado s30 video not changing gears HELP
[quote]ORIGINAL: billymare Check the grub screw for the 2nd gear clutch and i bet it is gone. It sounds as you are starting in 2nd gear. This happens A LOT!! [/quote] The screw still there man.should I open up the clutch
Posted on: 4/3/2011 6:05 PM by Author "eggonboost04"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10441065
RE: Tornado s30 video not changing gears HELP
i gotta get one, thanks for help
Posted on: 4/3/2011 11:42 AM by Author "eggonboost04"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10440223
RE: Tornado s30 video not changing gears HELP
man i just tryd leanin it out and still nothing, i dont wanna lean it too much i dont see alot smoke coming out, i dont want that thing to overheat.usually from the flash point of the hsn surface how many turns do u have urs in
Posted on: 4/3/2011 11:31 AM by Author "eggonboost04"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10440212
Tornado s30 video not changing gears HELP
HEY guys so i was watching some vids of the tornado s30 online and i can hear the second speed kicking in, so i made a vid of mine and i can see that is not working, sense i got the car i never heard the shifting i had it for like 2 weeks already, idk if the car takes off on second n stays there or only first gear, i try putting the screw on the clutch all the way in and out and i dont see a difference, i made a video so yall can gear it and a vid of full throttle take off n pinch test so u guys can tell me how my car is doing etc. any comments will help thanks. sorry about the recording i was trying to drive it n hold the phone at the same time http://www.youtube.com/watch?v=73lADSk1xSo http://www.youtube.com/watch?v=pWUIokkGi14 http://www.youtube.com/watch?v=ap2_OU71WCg
Posted on: 4/3/2011 10:23 AM by Author "eggonboost04"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10440117
Tornado s30 video not changing gears HELP
HEY guys so i was watching some vids of the tornado s30 online and i can hear the second speed kicking in, so i made a vid of mine and i can see that is not working, sense i got the car i never heard the shifting i had it for like 2 weeks already, idk if the car takes off on second n stays there or only first gear, i try putting the screw on the clutch all the way in and out and i dont see a difference, i made a video so yall can gear it and a vid of full throttle take off n pinch test so u guys can tell me how my car is doing etc. any comments will help thanks. sorry about the recording i was trying to drive it n hold the phone at the same time http://www.youtube.com/watch?v=73lADSk1xSo http://www.youtube.com/watch?v=pWUIokkGi14 http://www.youtube.com/watch?v=ap2_OU71WCg
Posted on: 4/3/2011 10:21 AM by Author "eggonboost04"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10440115
RE: TORNADO S30/BB SPUR GEAR
Any way of making the tornado s30 singe speed?like the shockwave. Would it go as fast tho? Thanks
Posted on: 3/31/2011 10:29 PM by Author "eggonboost04"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10435839
RE: bent dogbone trornado s30
Already did n its workin great, but I'm sayin for the future if it keeps on happening. Do they sell any stronger ones. N I'm having a little troble with the front ones sometimes the little pins on the dogbones come out of the wheel cup when I turn n is not letin me turn it back I gotta take apart. Would it b better if I get the longer ones 87mm
Posted on: 3/31/2011 10:20 PM by Author "eggonboost04"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10435831
bent dogbone trornado s30
so the front right dogbone got bent idk how it happend.I put a really small piece of fuel line in there I hope that wasznt the reason why. Any upgarded stronger dogbones for the tornado s30 out there. [IMG]http://i1177.photobucket.com/albums/x348/ferbru14/2011-03-29131820.jpg[/IMG] [IMG]http://i1177.photobucket.com/albums/x348/ferbru14/2011-03-29131910.jpg[/IMG]
Posted on: 3/31/2011 10:48 AM by Author "eggonboost04"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10434751
RE: bent dogbones :-(
http://www.teamassociated.com/search/?query=dogbones+t1&type=and&results=20&search=1 They have so many.. but the don't say t1 t2.what should I do.do u knw how long they are? 85mm?86?
Posted on: 3/30/2011 8:08 AM by Author "eggonboost04"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10432222
RE: bent dogbones :-(
So should I get t1s or t2s?
Posted on: 3/30/2011 8:01 AM by Author "eggonboost04"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10432204
bent dogbones :-(
so the front right dogbone got bent idk how it happend.I put a really small piece of fuel line in there I hope that wasznt the reason why. Any upgarded stronger dogbones for the tornado s30 out there. [IMG]http://i1177.photobucket.com/albums/x348/ferbru14/2011-03-29131820.jpg[/IMG] [IMG]http://i1177.photobucket.com/albums/x348/ferbru14/2011-03-29131910.jpg[/IMG]
Posted on: 3/29/2011 11:31 AM by Author "eggonboost04"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10430417
RE: Redcat racing or Nitrorcx?
Thanks for y'all opinion.I think he's gonna go with tornaso s30
Posted on: 3/26/2011 9:57 PM by Author "eggonboost04"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10425144
RE: GEAR MESH DOES IT SOUND GOOD VID?
[quote]ORIGINAL: Shabbernigdo [quote]ORIGINAL: eggonboost04 I can't see it. Gar box covers everythings [/quote] are you talkin about the mesh between the clutch bell and spur? if so just put a sheet of note book paper between them then push em together and tighten the screws. you shoule be able to pull out the paper fairly easy and it should be crinkeled. [/quote] Yeah gear mash. I put two
Posted on: 3/26/2011 9:54 PM by Author "eggonboost04"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10425142
RE: Redcat racing or Nitrorcx?
Thanks for the fast reply
Posted on: 3/26/2011 5:38 PM by Author "eggonboost04"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10424716
Redcat racing or Nitrorcx?
My friend wants to get a buggy from any of this two brands.witch one do you guys think isbetter from the two. Easy to find parts for both online? I. Knw redcat is idk aout nitrorcx. What u guys think thanks
Posted on: 3/26/2011 5:20 PM by Author "eggonboost04"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10424676
RE: GEAR MESH DOES IT SOUND GOOD VID?
I can't see it. Gar box covers everythings
Posted on: 3/26/2011 5:15 PM by Author "eggonboost04"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10424667
GEAR MESH DOES IT SOUND GOOD VID?
Hey guys I made a quick video so u guys can see and hear if my gear mesh is set right. thank you for taking your time http://www.youtube.com/watch?v=CXuUYnmXOS4
Posted on: 3/26/2011 10:58 AM by Author "eggonboost04"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10424053
RE: New Carb Coming?
[quote]ORIGINAL: 1QwkSport2.5r [quote]ORIGINAL: eggonboost04 So Make both needle flat with he surface? [/quote] I never reset my needles to ''factory settings''. I set the low speed needle about 1/2 turn lean from flush with the needle's orifice, and on the main needle I lightly seat it and turn it out 2-2.5 turns. This has always been a good starting point
Posted on: 3/26/2011 10:52 AM by Author "eggonboost04"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10424042
RE: 2.4 not responding after
nvm i got it guys
Posted on: 3/26/2011 10:27 AM by Author "eggonboost04"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10423991
RE: 2.4 not responding after
damn i was holding the one on the remote control not on the car, thats what i did wrong. i just saw the the car has one, so now how do i bind them togheter
Posted on: 3/26/2011 10:22 AM by Author "eggonboost04"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10423981
2.4 not responding after
Hey guys so I did what this guy said to set the fail on my car that I just got andnow the breaks stay set and the buggy is not resposting to the rc at all not even for turning. As soon as I turn on he buggy u can hear that the breaks are set.please help ......(Just turn both your transmitter and truck on then find the small black button next to the red LED light on the receiver. Apply full brakes, or your desired failsafe position and hold, then with a small screwdriver or hex wrench push the black button on the receiver and hold until the red light starts to blink {3-5 seconds}. Then release the button THEN the brake and it should be set. Test it by turning your truck and transmitter on applying full throttle {engine not running} then turn your trans. off and the failsafe should activate just like external failsafes.hope this helps )
Posted on: 3/26/2011 9:20 AM by Author "eggonboost04"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10423886
RE: 2.4ghz remote??
Helppp I did what u said and now my buggy is not responding at all. The breaks are apply as soon as I turn on the swich on the buggy. [quote]ORIGINAL: rchobbyunlimited Just turn both your transmitter and truck on then find the small black button next to the red LED light on the receiver. Apply full brakes, or your desired failsafe position and hold, then with a small screwdriver or <a rel=''nofollow'' style=''border-bottom: 1px dashed black; color: black; text-decoration: none; background-color: transparent;'' title=''Full line of hex wrenches.'' target=''_blank'' href=''../../../../buynow/keywordclick.cfm?bid_id=1015''>hex wrench push the black button on the receiver and hold until the red light starts to blink {3-5 seconds}. Then release the button THEN the brake and it should be set. Test it by turning your truck and transmitter on applying full throttle {engine not running} then turn your trans. off and the failsafe should activate just like external failsafes.hope this helps [/quote]
Posted on: 3/26/2011 8:50 AM by Author "eggonboost04"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10423839
RE: New Carb Coming?
So Make both needle flat with he surface?
Posted on: 3/26/2011 7:25 AM by Author "eggonboost04"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10423695
RE: New Carb Coming?
Bump for info plz
Posted on: 3/25/2011 9:47 PM by Author "eggonboost04"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10423220
New Carb Coming?
hey guys i just order a new carb from urchobby.com for my tornado s30, do you guys think that it comes with the stock tornado settings already?if not what r stock settings? or i have to set them before turning on. thank you
Posted on: 3/25/2011 5:58 PM by Author "eggonboost04"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10422846
New Carb Coming?
hey guys i just order a new carb from urchobby.com for my tornado s30, do you guys think that it comes with the stock tornado settings already?if not what r stock settings? or i have to set them before turning on. thank you
Posted on: 3/25/2011 12:14 PM by Author "eggonboost04"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10422177
RE: glow plug question
Thanks for tryin to help but only solution is a new carb alreadt order it from urhobby. The threads insidse the carb on the idle screw got messd up.it sucks I only got to use it for 10mins.now more waitin :-(
Posted on: 3/23/2011 5:38 PM by Author "eggonboost04"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10418652
RE: glow plug question
fml while adjustin the idle screw it came out try puting back in and it striped, idk for sure if is on the carb or the screw it self
Posted on: 3/23/2011 10:44 AM by Author "eggonboost04"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10417839
RE: Redcat Racing Tornado Thread
thanks[:D]
Posted on: 3/23/2011 5:52 AM by Author "eggonboost04"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10417361
RE: glow plug question
do I really need two plugs.not the igniter.I'm talkin about the plujgs now lol so yea one for break in n another one fo after thanks
Posted on: 3/22/2011 10:55 PM by Author "eggonboost04"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10417130
| 
