|
RE: Walkera Throttle Hold Problem
Do you have the throttle trim at lowest position?
Posted on: 8/27/2012 12:31 AM by Author "ehirobo ehirobo"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=11207254
RE: Tower pro mg90s good for 450 flybarless?
For the copterX CX-3X1000 gyro, connect the cyclic servo to ch 1 , 2, and 3. Rudder servo to ch4. For the receiver to gyro connection please refer to the manual. The esc connect directly to receiver ch3. For your 500 the 2 front servo should be ch1 and 6, and the rear servo should be ch2. it does not matter which "front" servo is ch 1 or 6. as long as the setup is correct and everything move in right direction. :)
Posted on: 8/20/2012 9:31 PM by Author "ehirobo ehirobo"
in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=11200475
Walkera Hoten-X 6 axis helicopter
This one is just the right size for a mini camera and it is so stable. [:D] http://www.youtube.com/watch?v=EWIKD_UpnF8&feature=player_embedded
Posted on: 8/7/2012 9:38 PM by Author "ehirobo ehirobo"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=11185111
RE: Copter X CX-CT6C Â 2.4ghz FHSS digital proportional radio
Some of the earlier model may have issue working with flybarless system. But all copterX cx-ct6c purchase after 11/2011 have new firmware and solved this issue. :)
Posted on: 6/28/2012 1:37 AM by Author "ehirobo ehirobo"
in the forum "Electric RC Helis"
http://www.rcuniverse.com/forum/fb.asp?m=11134814
RE: fg f1 hydros ?
I believe FG recommand atleast 25kg servo. For brake fluid do not use real car dot 3 or 4 fluid. These system use hydrolic fluild. You can get it from any shop which sell giant scale rc car. :)
Posted on: 6/28/2012 1:21 AM by Author "ehirobo ehirobo"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11134805
RE: Binding To Devo 7 (RX2623V-D) PLEASE HELP!!!!!
Please refer to other post for the power up process. :)
Posted on: 6/28/2012 1:15 AM by Author "ehirobo ehirobo"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=11134804
RE: Binding Walkera V100D08 to Devo 7
you do not need to bind the devo 7 to your v100d08, simply turn off the "fix id" function in your transmitter. And power up as normal (with throttle stick at lowest position, and do not turn anything until the led on the heli stop flashing). :)
Posted on: 6/28/2012 1:13 AM by Author "ehirobo ehirobo"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=11134803
Walkera MINI CP
The V2 new version of the Genius CP. Lot of changes like telemetry build into the 4in1 receiver unit, different design to keep the weight closer to the CG for better 3D performance, higher power main motor, better main gear....... lot and lot of changes.
Posted on: 2/13/2012 9:02 PM by Author "ehirobo ehirobo"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=10957958
Walkera UFO MX400
Hum... this model have optional telemetry. GPS, etc. And it is design for taking video with buildin 6 axis gyro. Still playing around with it to find out how to setup everything..... :)
Posted on: 12/13/2011 2:41 AM by Author "ehirobo ehirobo"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=10857033
RE: Walkera new v120d02S
As you can see from the pic. The main shaft is much thicker than other v120's, thicker main gear, composite rotor head, durable landing gear, one piece canopy..... I will not say it is indestructible, but sure extermly durable. [:D]
Posted on: 11/23/2011 7:01 PM by Author "ehirobo ehirobo"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=10826334
RE: Walkera Airwolf 200SD3 helicopter
[quote]ORIGINAL: ehirobo ehirobo Full 6ch and constructed like full size EP heli with brushless motor, 3 axis gyro, multiblades head, Torque tube tail, scale flying lights.... Nice little scale helicopter. [:D]headbang [/quote] And he 5 blades 200SD5 is out too. hehe
Posted on: 11/8/2011 9:07 PM by Author "ehirobo ehirobo"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=10803651
Walkera new v120d02S
Hum... look quite interesting for 3d. (features from walkera) Walkera V120D02 is not only a durable ,strong utility 3D helicoptor, but also a very good looking micro helicoptor. Canopy-PVC film vacuum-Thermoform artwork make the exterior even and elastic. Mixing with beautiful red ,black and white color ,enjoys your eyes.smooth bow ,clear mark print show no flaw at all Main blades-Using unique compound material technology,increase the toughness 100%. light weight promoted the performance a lot;bright and shinny surface,Applying for the silk screen printing artwork on the surface,make the font and graphic more vividly Skid landing-Adopting the newest engineering plastic material,promoted the skid landing elasticality ,strenthened its durability .Intergrated battery holder and skid landing mold artwork give good consideration to skids intensity,space,and balance.slightly leaning forward stabilizer is in pleasure of sense stable. Drive gears: Newly upgraded drive gear set. By increasing the contact area and use of low friction materials. The drive train is more durable then previous design, at the same time more reliable and less rotation resistance... Servomicro 3g servo ,have been applying in WALKERA classic helicoptor like 4G3,4G6, and flybarless 120 size series models, wide applicability,good quality,stable performance, smart body with prompt response, big torque,the maintenance is simple and convinience, Shaft driven-besides the shaft driven feature of high efficiency, the square-shaped carbon fiber tail boom ,not only fixed the horizontal angle but also leave perfect space for the shaft driven structure, manifested the design equisition. Stabilizer-brand new hardened body, carbon fiber tail stablizer, plus delicate processing and metalic joints ,showed the V120D02 professional 3D helicoptor charming. Motor-upgrade from inner brushless motor to the outrunner brushless motor（WK-WS-15-001） 12000KV, the weight is barely over 8.8g, revolutions is higher ,weight is lighter, loading tempreature is lower, performance efficiency is more excellent, power is stronger.Hurricanes,loops,funnels,rolls and inverted flight performaned with great enthusiatic Flybarless control system- upgrade Receiver 2622V is not only a integration and miniaturization but more important a comprehensive optimized program ,which made the performance of hurricanes,loops,funnels,rolls and inverted flight relaxed,comfortable and smoothly,
Posted on: 10/19/2011 9:26 PM by Author "ehirobo ehirobo"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=10774099
RE: CopterX GY240 gyro question
Hum... usually the 2 double side tape and metal plate is only necessary for larger heli with more vibration. And the hot glue (or foam) trick is only necessary for align 3G's..... Anyway, How I setup my gyro is turn it to normal mode at around 30% gain (for your spektrum it should be around -15% gain). Test fly the heli. Only do mechnical changes (adjust the rudder push rod) to correct the tail drift. After that's been done. Switch back to HH hold at around 30% gain, now adjust the gain to stop tail drifting, then adjust the delay to stop tail hunt.... Just my 2 cents. [;)]
Posted on: 10/17/2011 8:27 PM by Author "ehirobo ehirobo"
in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10770562
RE: CopterX GY240 gyro question
For the copterX gy240 gyrois a futaba 401 clone. Please refer to the manual in the following link. http://www.ky-model.com/copterx/copterx_GY401.doc For normal hover we find it best to work at around 30% gain setting. So it will be around +15% on your spektrum. (the led will turn on at the gyro without any stick input). If you are in normal mode the led on the gyro will stay off.
Posted on: 10/16/2011 9:44 PM by Author "ehirobo ehirobo"
in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10768911
RE: Walkera LM180D01
Now we got the latest sample from walkera, not just another LM180D01, This one have buildin video camera so you can store your flight video in the included SD card. :)
Posted on: 9/28/2011 1:02 AM by Author "ehirobo ehirobo"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=10737940
Walkera Airwolf 200SD3 helicopter
Full 6ch and constructed like full size EP heli with brushless motor, 3 axis gyro, multiblades head, Torque tube tail, scale flying lights.... Nice little scale helicopter. [:D]headbang
Posted on: 9/15/2011 7:52 PM by Author "ehirobo ehirobo"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=10718810
Walkera new 6 axis Genius CP helicopter
Newest generation of walkera micro heli with 6 axis gyro. And for user with older walkera TX (2801 or 260x), there are different models available so can run with both 2801 or Devo radio system. [:D]
Posted on: 9/8/2011 10:48 PM by Author "ehirobo ehirobo"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=10708285
RE: Walkera CB-180Z Swash Leveling & Blade Tracking
1: If the head damper, feathering shaft, etc, are in good shape. Just use the 2 push rod connect the blade grip's control arm to swash to adjust the tracking. And check the blade grip as the material is quite soft so offen it bend..... 2: just eye ball it should be good enough. 3: usually around 50% is a good starting pt. And will adjust it after test flight. :)
Posted on: 8/24/2011 8:25 PM by Author "ehirobo ehirobo"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=10685946
Walkera New V200D03 w/ DEVO8 transmitter
These new walkera seems to fly better and better. With much stiffer frame design and rock solid tail. And they seems to improve on build quality too with the CNC parts and the carbon blades too. :)
Posted on: 8/19/2011 10:23 PM by Author "ehirobo ehirobo"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=10678350
RE: Replace servo's on Walkera 450
Really no point to rebuild them as parts are not available.... Any std 9g servo will work the the V450. [:D]
Posted on: 8/5/2011 7:44 PM by Author "ehirobo ehirobo"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=10657539
RE: Walkera V100D,s
ya, the v100's is not a bad flyer. It come in 3 different models. v100d01- 4ch flybarless, v100d03 - 6ch flybarless or the v100d08 6ch flybarless run the new Devo8 system. For the new v100d08 use the new soft plastic blades which is very durable. Even it is brushed setup for some reason (maybe lighter or different it the firmware inside the receiver), it seems to fly better than the older brushless system..... for battery the 03 and 08 use the new smaller 350mah 1S. The 01 use the older bigger 500-600mah 1S. :)
Posted on: 8/4/2011 11:46 PM by Author "ehirobo ehirobo"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=10656220
RE: Where to buy a Trex 500 clone?
Or if you wants something cheaper can try the aluminum frame cx 500AE too. :)
Posted on: 7/28/2011 2:11 AM by Author "ehirobo ehirobo"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=10642734
walkera 4F180
I wonder why there are not much people talk about this heli. I mean it fly great and it is one of the heli I fly almost daily now. As you can imagine with limited space in Hong Kong even with my love for the 450 and 500 it is really hard to find places large enough for them here..... But this little bird is great to fly in almost anywhere and I love to fly it at the park across the street from my office when my boss is not around. lol
Posted on: 7/19/2011 8:55 PM by Author "ehirobo ehirobo"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=10629681
RE: After-market radio for Walkera 53Q3 Co-axial heli?? Pls advise!!
I had seen people done it before but with the twin motors setup it is extermly hard and lot of custom work necessary.... You may consider getting the 2801pro tx as it is a good radio and can control most walkera and with 2801pro rx you can use it in other heli too. :)
Posted on: 7/19/2011 8:50 PM by Author "ehirobo ehirobo"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=10629672
RE: 4F200LM highly detailed walkera multi blades heli
It is not bad. If you have some flying experience should find it quite easy to fly as it have a 3 axis gyro. :)
Posted on: 7/19/2011 8:33 PM by Author "ehirobo ehirobo"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=10629645
Nine eagle 772B mini powered glider
Compare to the Yak54 this one is more of a glider design. And it is a 3ch so the mechanical setup is simpler. This one should be more stable at low speed. After it stop raining outside will go a do a quick flight report.
Posted on: 7/15/2011 2:46 AM by Author "ehirobo ehirobo"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10622001
Nine eagle Yak54 mini flyer
Quite surprise how fast this thing fly. Very simple for quick flight between flights and the good thing is not need to setup anything. Just charge the battery and go. As I am a heli person I find the heli a little quick and need sometime to get use to. But it is fun so I can do something while charging my heli battery. �
Posted on: 7/11/2011 11:45 PM by Author "ehirobo ehirobo"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10617309
SH 6030 helicopter w/ camera
I know it is just a toy heli….. But this one have a build-in camera which you can take video. Store it inside the included mini SD. And playback with the included card reader on your PC. [:D]
Posted on: 6/27/2011 1:37 AM by Author "ehirobo ehirobo"
in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10594019
RE: 5 Blade rotor and 3 axis gyro?????
If you had flown any other 450 heli. The first thing you will notice is the copterX Black Angel is very responsive. As the frame design is narrow and stiff. And the head and tail assembly have very little if any slop. I think it is one of the nicest 450 heli on the market now. :)
Posted on: 6/22/2011 7:58 PM by Author "ehirobo ehirobo"
in the forum "Scale RC Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=10587656
RE: CopterX servo help.
The blue servo are copterX cx-9g servo. :)
Posted on: 6/22/2011 7:47 PM by Author "ehirobo ehirobo"
in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=10587642
| 
