|
RE: POST YOUR WORKS HERE!
I don't normally post to say great job but jonmills those are absolutely jawdropping.
Posted on: 9/7/2006 2:44 PM by Author "em x 6 racer"
in the forum "RC Painting, Detailing & Bodies"
http://www.rcuniverse.com/forum/fb.asp?m=4721593
RE: Tamiya Subaru Drift Spec Build
Any tt-01 is goof for drifitng.
Posted on: 8/13/2006 12:53 PM by Author "em x 6 racer"
in the forum "RC Drifting"
http://www.rcuniverse.com/forum/fb.asp?m=4617416
RE: Tamiya Subaru Drift Spec Build
No it comes with that.
Posted on: 8/12/2006 3:22 PM by Author "em x 6 racer"
in the forum "RC Drifting"
http://www.rcuniverse.com/forum/fb.asp?m=4614470
RE: Yokomo R.E Amemiya RX-7 coming soon
Yokomo and tamiya both have there high and low points. I have both and love them both. The easiest way is research and see whats best for you. Dont't buy something just cause everyone has one or cause its expensive. Just research and see what is in your budget and best for you. Also I love the rx-7 but like dx3 said I would not expect that out any time soon.
Posted on: 8/12/2006 1:45 PM by Author "em x 6 racer"
in the forum "RC Drifting"
http://www.rcuniverse.com/forum/fb.asp?m=4614242
RE: How does a 4WD RC Driveshaft work?
[quote]ORIGINAL: machpower ?????? [:@] [/quote] That was a little random.
Posted on: 8/12/2006 1:42 PM by Author "em x 6 racer"
in the forum "RC Drifting"
http://www.rcuniverse.com/forum/fb.asp?m=4614233
RE: How does a 4WD RC Driveshaft work?
No oofense but if you don't know the answer to that question i don't think you should be designing anything.
Posted on: 8/12/2006 1:31 PM by Author "em x 6 racer"
in the forum "RC Drifting"
http://www.rcuniverse.com/forum/fb.asp?m=4614199
RE: Amps to charge batteries
The most you should charge them at is 3.3.
Posted on: 8/9/2006 8:36 PM by Author "em x 6 racer"
in the forum "RC Drifting"
http://www.rcuniverse.com/forum/fb.asp?m=4603557
RE: kinda noob needs help
Well there are planty of guys who vouch for etheir. I have a tt-01 and its a great choice. On the other hand ask magnat. He know's a couple guys who love there tl-01's. I would have to say get a tt-01 if you can afford the extra cash.
Posted on: 8/8/2006 2:39 PM by Author "em x 6 racer"
in the forum "RC Drifting"
http://www.rcuniverse.com/forum/fb.asp?m=4598200
RE: kinda noob needs help
First off seems how you are asking what car to get nitro would not be a good choice. It is hard to tune and very expensive. And I would reccomend you start off with a tt-01 or tl-01. Leaning towards the tt-01. The tl-01 is however cheaper.
Posted on: 8/8/2006 2:28 PM by Author "em x 6 racer"
in the forum "RC Drifting"
http://www.rcuniverse.com/forum/fb.asp?m=4598159
RE: Pictures of drift bodies
PM me with a price and we can talk
Posted on: 8/6/2006 11:54 PM by Author "em x 6 racer"
in the forum "RC Drifting"
http://www.rcuniverse.com/forum/fb.asp?m=4591672
RE: getting into drifting
I think tomorow i am finally gonna cut that pvc tomorow and see why you preach about it.
Posted on: 8/3/2006 12:05 AM by Author "em x 6 racer"
in the forum "RC Drifting"
http://www.rcuniverse.com/forum/fb.asp?m=4577512
RE: getting into drifting
ABS doesn't last as long as PVC.
Posted on: 8/2/2006 1:08 PM by Author "em x 6 racer"
in the forum "RC Drifting"
http://www.rcuniverse.com/forum/fb.asp?m=4575113
RE: whats diference between ep and gp bodies
Yeah.
Posted on: 8/2/2006 1:06 PM by Author "em x 6 racer"
in the forum "RC Drifting"
http://www.rcuniverse.com/forum/fb.asp?m=4575111
RE: getting into drifting
Yes ABS or PVC is worth it. And I have a trinity co27 that I loved so much I went out and bought another.
Posted on: 8/2/2006 5:33 AM by Author "em x 6 racer"
in the forum "RC Drifting"
http://www.rcuniverse.com/forum/fb.asp?m=4573989
RE: Best Drift motor
A general range is 19-27. The bigger the number the more trq.
Posted on: 8/2/2006 5:32 AM by Author "em x 6 racer"
in the forum "RC Drifting"
http://www.rcuniverse.com/forum/fb.asp?m=4573988
RE: MR02 drifting begins with this...
No offense but no on ever said it couldn't be done. Most people say consistancy is the problem. And that still seems to be the issue.
Posted on: 8/2/2006 5:30 AM by Author "em x 6 racer"
in the forum "RC Drifting"
http://www.rcuniverse.com/forum/fb.asp?m=4573987
RE: whats diference between ep and gp bodies
EP= Electric power meaning anywhere from 190-199mm GP= Gas power as in 200m.
Posted on: 8/2/2006 3:08 AM by Author "em x 6 racer"
in the forum "RC Drifting"
http://www.rcuniverse.com/forum/fb.asp?m=4573845
RE: drift motor?
540 is the size. They amke conversions. And for 1/10th I have to agree the co27 is the best bang for the buck. I have a micro rs4 and I run the team orion big block and that spins tires just fine.
Posted on: 7/31/2006 8:09 PM by Author "em x 6 racer"
in the forum "RC Drifting"
http://www.rcuniverse.com/forum/fb.asp?m=4567998
RE: Ordered some parts for my TT-01D at RC MART!
Let me know.
Posted on: 7/31/2006 2:22 AM by Author "em x 6 racer"
in the forum "RC Drifting"
http://www.rcuniverse.com/forum/fb.asp?m=4565225
RE: Ordered some parts for my TT-01D at RC MART!
In a situation like that alum parts will bend. I will be ordering a ton of alum for my tt-01 and will post up pics if you would like.
Posted on: 7/31/2006 2:21 AM by Author "em x 6 racer"
in the forum "RC Drifting"
http://www.rcuniverse.com/forum/fb.asp?m=4563534
RE: Ordered some parts for my TT-01D at RC MART!
Lol trust me it get so much crazier. I just spent 450 on my project and that was without paint, batteries, charger, servo, and tires. I basically spent it on a roller chasis, radio, esc, and motor.
Posted on: 7/30/2006 2:42 AM by Author "em x 6 racer"
in the forum "RC Drifting"
http://www.rcuniverse.com/forum/fb.asp?m=4561231
RE: LOOK AT WHAT THE KID JUST GOT!!!
Just look it up under 2 channel pistols on tower.
Posted on: 7/29/2006 3:23 AM by Author "em x 6 racer"
in the forum "RC Drifting"
http://www.rcuniverse.com/forum/fb.asp?m=4557901
RE: PLEASE READ its a Question
Bearings and alum driveshaft. Oh and some drift tires.
Posted on: 7/28/2006 2:43 AM by Author "em x 6 racer"
in the forum "RC Drifting"
http://www.rcuniverse.com/forum/fb.asp?m=4554001
RE: PLEASE READ its a Question
If you are gonna buy a new motor which isn't neccasary buy a c027 by trinity.
Posted on: 7/28/2006 2:01 AM by Author "em x 6 racer"
in the forum "RC Drifting"
http://www.rcuniverse.com/forum/fb.asp?m=4553932
RE: LOOK AT WHAT THE KID JUST GOT!!!
Grab a Novak XRS and a Futaba magnum 2PL.
Posted on: 7/27/2006 11:33 PM by Author "em x 6 racer"
in the forum "RC Drifting"
http://www.rcuniverse.com/forum/fb.asp?m=4553519
RE: Where can I get an affordable Yokomo drift car to import to Barbados W.I.
Go edit your profile and edit your signature.
Posted on: 7/26/2006 10:23 PM by Author "em x 6 racer"
in the forum "RC Drifting"
http://www.rcuniverse.com/forum/fb.asp?m=4549273
RE: Where can I get an affordable Yokomo drift car to import to Barbados W.I.
I agree thats what I did.
Posted on: 7/25/2006 7:48 PM by Author "em x 6 racer"
in the forum "RC Drifting"
http://www.rcuniverse.com/forum/fb.asp?m=4544444
RE: PLEASE READ its a Question
I'm pretty sure any controller with the right connector will work. Post up the pics of it and I will help you out.
Posted on: 7/25/2006 1:28 AM by Author "em x 6 racer"
in the forum "RC Drifting"
http://www.rcuniverse.com/forum/fb.asp?m=4541618
RE: PLEASE READ its a Question
No beef man just kinda think before you type. Thank you for the apology. Have fun with the z tune.
Posted on: 7/25/2006 1:03 AM by Author "em x 6 racer"
in the forum "RC Drifting"
http://www.rcuniverse.com/forum/fb.asp?m=4541555
RE: PLEASE READ its a Question
Hey njissan tuner that was directed at gettingslideways. I have no problem helping new guys. Ask alot of them on here and i have helped pretty much all of them. If you need help feel free to come over to my forum or catch me on amessenger service. I am more than happy to help. Sorry for the crossed wires.
Posted on: 7/24/2006 11:52 PM by Author "em x 6 racer"
in the forum "RC Drifting"
http://www.rcuniverse.com/forum/fb.asp?m=4541285
| 
