any big profile 3d plans out there Help please
looking for a 30-50cc profile 3d plane does anyone make the kits anymore does anyone have plans for them. i know with the arf market were it is it is ver hard to find anything. i would be greatful for help thank you
Posted on: 9/10/2012 4:10 PM by Author "emilsanto" in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=11224231

anyone still make a giant scale profile 3d plane
looking for a 30-50cc profile 3d plane does anyone make the kits anymore does anyone have planes for them. i know with the arf market were it is it is ver hard to find anything. i would be greatful for help thank you
Posted on: 9/10/2012 4:09 PM by Author "emilsanto" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11224228

futaba 10cg 14 channel rec.?
i am looking to buy a new radio i am looking a a futaba 10cg or 8 fg. does anyone own the new 10cg.? the new 10cg comes with a 14 channel reciver can i use all the channels on it with the 10cg>? also the 8fg with a 14 channel rec. i would like some advise on theses radios any help i would be greatful thanks
Posted on: 8/29/2012 4:09 PM by Author "emilsanto" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11210766

RE: Not4Sale
The same guy who's name is on the plans. about the only harder things to make are the wing ribs and light ply fuse sides. the rest is made rom sticks and sheeting. pdf instructions below [quote]ORIGINAL: 91shadowrider Who origonally sold the kit ? I didn't know there was a kit. Is there build instructions? If so could you e.mail me a copy? I bought one at a swap meet and stripped it down to re cover it. I had many hours in getting it ready to recover until my kid who was a baby at the time , layed down next to it and kicked it to death. I think he had a great time. I was devastated as I never got to fly it. I now have a set of plans and a build is in my near future. [/quote]
Posted on: 4/24/2011 12:19 PM by Author "emilsanto" in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=10482252

RE: Not4Sale
Do you really think tail wires are needed ? just wondering. i have the origanl kit and an extra set of plans. i need to get building.. any build tips? thanks [quote]ORIGINAL: Doog-meister Here's mine. ST .40 on the front. Waiting for a maiden. Need to re-do the pull-pull on the rudder to get rid of the slop there first. Added wire braces for the elevator, as it seemed too flexible. [/quote]
Posted on: 3/26/2011 3:47 PM by Author "emilsanto" in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=10424480

RE: Kit Hoarding
I just find the plane kits i like alot and dont think i would want to be without . then instead of building that kit i make a copy/cut another kit from the original order the extra wood and i always have the original kit. just copy all the fuse formers and wing ribs and any light ply fuse sides extra. and you have a new kit.
Posted on: 3/19/2011 4:14 PM by Author "emilsanto" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10410329

RE: Help me convince Hobbico to reissue...
YEA i cant beleive nobody else for the cg ultimate thats the best flying bipe of all time. i read the posts and cant ever see myself buying stinger it was a cheap plane that i just didnt like. but a fun plane for a lot of people, as for the cg extra. i have seen a lot of them and they never looked quite right to me. i think its the cowling and the lines didnt apeal to me. all though i have seen them fly and the people who flow them seem to really like them. so i guess this one would be popular enough. i like the sukhio better than the extra, i just bought a cg sukhoi kit at a swap real cheap. vers 2 with the new fiberglas parts. and a cg ultimate kit for 100.00 earlier in the year at a swap. i ran out of money i could have had the cg extra kit for 70.00. and nobody bought it. hard to believe huh. i am like you guys i like to build. but from now on when i get i plane i like i order all the wood and just cut a new kit and keep the origianal for reference. there is just no money for kit makers any more and it makes me sad. these kit we like are for a better word out of style. every new guy wants to 3d fly the funny thing is most 3d flyers i see cant fly a plane strait or even know what a split s is or a hammer head. lol As for the Jungman yes i would buy a kit. but i can remember a few of them at the flying fields and everyone who owned on complained about the time and trouble putting it toghter at the field. great scale kit i think its worth the trouble. but i am sure if the goldberg ultimate was rerealesed it would out sell the jungman and extra very easy. My votes 1 cg ultimate 2 cg jugman 3 extra [quote]ORIGINAL: J.Paul Saure Nobody will speak for the GB Ultimate??? I want one, I was going to get one this year... ...I thought they wouldn't discontinue "THAT" one!!! [:'(] [/quote]
Posted on: 3/19/2011 4:05 PM by Author "emilsanto" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10410315

RE: ST2300
I have not see any supertiger eng run relibly except one the 4500. guys at our club had them in the past. the only way they could get them to run more reliable was they used a os. 7D carb on them. there was omeone who sold carb adaptors for the super tigers in the past but i dont know if there still around i havent used a supertiger eng in almost 8 years or bettter. i avoid them like the pleage. i sold mine very cheap. i dont see supertigers run at our club field anymore. and i wount own any supertigers again and you couldnt give me one. not worth the trouble or your plane
Posted on: 3/15/2011 4:17 PM by Author "emilsanto" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10402210

RE: use for SKOAL cans
45cal try making some wheels ot of them
Posted on: 3/12/2011 4:41 PM by Author "emilsanto" in the forum "Tips & Techniques"
http://www.rcuniverse.com/forum/fb.asp?m=10395976

RE: Not for sale
Nice i wouldnt mind priting it out full size. but i guess you really dont have to. Thanks for posting. keep us updated when you install your radio gear [quote]ORIGINAL: JRFisher Here she is. [/quote]
Posted on: 3/8/2011 7:30 PM by Author "emilsanto" in the forum "Profile and Fun Flying Planes"
http://www.rcuniverse.com/forum/fb.asp?m=10387976

RE: Anyone have a Goldberg Sukhoi SU26MX Kit??
doy you have a link to a web page for the MAN plans #FSP07961 you used? thanks [quote]ORIGINAL: Gray Beard This is the one I built from MAN plans #FSP07961, it's the Suk 29 with an 80 inch span, calls for a four stroke 1.20 but I made a few mods and used a Brison 2.4 40cc gasser. This was about a perfect flying machine until I forgot to pull out my TX antenna one day. That was a once and only thing and has never happened again!!![:(] Very easy build if you know how to sheet. Very light too if you build it stock. I plan on building another one, I enjoyed the build so much and was that thrilled with the plane.[;)] [/quote]
Posted on: 3/8/2011 7:05 PM by Author "emilsanto" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10387928

RE: G&L Hobbies 1/5 Super Chipmunk Build (short kit)
Man i want this kit i keep looking at it at the gl web page. i dont think you can beat the price. i dont know what the shipping would be for it >?
Posted on: 3/8/2011 6:42 PM by Author "emilsanto" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10387876

RE: Not for sale
if you build another maybe you could take some pics of the fuse being built. great idea with the profile version. Anyone know how much/thepercent would be to blow up the planes to come out with a 90/120 size NFS
Posted on: 3/8/2011 6:39 PM by Author "emilsanto" in the forum "Profile and Fun Flying Planes"
http://www.rcuniverse.com/forum/fb.asp?m=10387869

FPE 2.4 what oil are you using on your fpe 2.4
Trying to get an idea of what oil you guys with FPE engines are using, i have a 2.4 i dont even know if there are many people buying these engines anymore becuase of the cheap china engines that are on the market. thanks
Posted on: 3/8/2011 6:30 PM by Author "emilsanto" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10387379

RE: FPE 2.4 what oil are you using on your fpe 2.4
i know it get confusing here from the fpe site ? thats why i was wondering with newer oils what any owners of the fpe 2.4 were using Acording to this he recomeneds minerals.? or is belray MC-1 synthetic Suggested gas/oil mix: http://www.fpengines.com/docs/24doc.htm I have ran numerous brands of oil and recommend Bell Ray MC-1 at a 50:1 ratio or Golden Specto at a 50:1 ratio. I believe any good quality synthetic oil at the manufacturers ratio will be fine. If they give variable ratios, I recommend 50:1 ratio with high-test gas. Running oil contents with more oil than recommend can carbon engine or in the extreme case, could stick rings in piston
Posted on: 3/8/2011 6:27 PM by Author "emilsanto" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10387839

RE: FPE 2.4 what oil are you using on your fpe 2.4
Acording to the guy who makes them he said the 2.4 parts crank and top end are from a husqvarna eng. [quote]ORIGINAL: w8ye The cylinder/piston/rod are from a Dolmar chain saw I have a Brison 3.2 which is a lot like it. I just use 32:1 Pennzoil Air cooled 2 stroke oil [/quote]
Posted on: 3/8/2011 5:05 PM by Author "emilsanto" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10387622

RE: FPE 2.4 what oil are you using on your fpe 2.4
FPE States only running 50:1 mixture Thats why i was asking what fpe eng. owners were using Thanks
Posted on: 3/8/2011 4:57 PM by Author "emilsanto" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10387607

RE: Not for sale
Nice job on the profile. is the fuse a soild piece of balsa.? if so what thickbess
Posted on: 3/8/2011 4:55 PM by Author "emilsanto" in the forum "Profile and Fun Flying Planes"
http://www.rcuniverse.com/forum/fb.asp?m=10387598

RE: Sukhoi SU-26 MX build
Cyberwolf Can you tell me how you had yours setup. did you have 2 elevator servos in the tail.? and the servos used./ i have a moki 1.8 but it think it might will be to much. I am looking for real good vertial upline and it to be able to do a torge roll now and then. but no 3d flying with it. i dont want to over do it and make it to heavy. looks like the os 1.60 would be the best 2 stroke for it. i was thinking a saito 1.80 might shake it apart. if anyone else want to chime in let me know what you had in yours. thanks
Posted on: 3/8/2011 12:12 PM by Author "emilsanto" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10387048

RE: Sukhoi SU-26 MX build
What engines have you guy run on the su-26.? was the ys 120 more than enough. how about a ys 140 or saito 180.? what about 2 strokes. what sizes thanks
Posted on: 3/8/2011 8:57 AM by Author "emilsanto" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10386654

RE: Ultracote color chart??
this is the only thing i can find right now you could email them and ask if they have a chart. i moved to ultracote years ago http://www.hangar-9.com/Products/Ultracote.aspx?PageSize=72 or due a search on google for oracover chart. same thing
Posted on: 3/7/2011 4:17 PM by Author "emilsanto" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10385309

RE: Hitec vs other brands metal gear servos?
Thanks thats what i need. can you tell me what battery pack how many MH are you useing for them [quote]ORIGINAL: LuvBipes Been using Futaba S3305 for years on planes up to 27% with excellent results. Good value for the money IMO. http://www3.towerhobbies.com/cgi-bin/WTI0001P?I=LXDWF8&P=8 SPECS: Dimensions: 1.6 x 0.8 x 1.5" ( Weight: 1.7oz (1-11/16oz) (47g) Speed: 0.25 sec/60° @ 4.8V, 0.20 sec/60° @ 6V Torque: 124 oz-in (8.9 kg-cm) at 6V 99 oz-in (7.1 kg-cm) at 4.8V [/quote]
Posted on: 3/7/2011 7:58 AM by Author "emilsanto" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=10384240

RE: Sukhoi SU-26 MX build
I was hearing that elavator flutter was happening sometimes with the plane. if the elevator was covered it would be stronger/stiffer [quote]ORIGINAL: swixtt i had the Ver 1.0 so i can't answer your question really. why do you want covered emp. with balsa? that plane is such a good flyer... so precise. [/quote]
Posted on: 3/7/2011 7:54 AM by Author "emilsanto" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10384234

RE: Sukhoi SU-26 MX build
Bigal126 i wish i had the building experinece you have i would do the same. I wanted to know if anyone has built covered elevators or the rudder. it would be stronger and maybe help stop any elevator flutter. i guess i could use smaller sticks and the sheet with balsa to bring it back to size.
Posted on: 3/7/2011 7:53 AM by Author "emilsanto" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10384233

RE: Sukhoi SU-26 MX build
I know its a old tread but i just got a version 2 goldberg su 26. and was wondering if anything need modded. has anyone built balsa covered elevators and rudder instead of the stick built? thanks
Posted on: 3/6/2011 4:46 PM by Author "emilsanto" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10383083

RE: Anyone have a Goldberg Sukhoi SU26MX Kit??
If you find it gray let me know. i just cant see building this kit without coping it. to hard to find the Goldberg SU26. and what it would cost to copy it would be a shame not to . when i find a goldberg ultimate kit i will do the same.
Posted on: 3/6/2011 4:04 PM by Author "emilsanto" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10382974

RE: Anyone have a Goldberg Sukhoi SU26MX Kit??
I got lucky and bought one at a swap shop today. the new version with the fiberglass parts and landing gear on the fuse.it had 2 landing gear sets. a fiberglass and aluiminum set. i gave the guy 160 for it. i would like to cut another kit from the original, Maybe graybeard or jim could tell me about how much in cost the wood i need to copy it runs. i wish you good luck finding a kit fallingleaf
Posted on: 3/6/2011 2:31 PM by Author "emilsanto" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10382791

RE: Not for sale
yea there are only a few precut pieces. here what is cut in my kit the wing ribs wing tips, lightply wing/fuse former, fire wall 3 fuse formers. light ply bottom hatch wire landing gear. balsa elevator center block.
Posted on: 3/6/2011 11:21 AM by Author "emilsanto" in the forum "Profile and Fun Flying Planes"
http://www.rcuniverse.com/forum/fb.asp?m=10382506

Hitec metal gear servos vs other brands.?
i am thinking of upgrading some of my older hitec 605 metal gear servos. on my cap232 and a giles 202 Are the any brands that are totaly metal geared.? not like hitec's metal gear set with the plastic drive gear. thats were the problem is on my hitec sevos' the plastic gear wears real fast and then the servo will fail. i thought about the hitech karbolite sevos but i here problems about them on 1/4 scale planes. i am worried about servo gear strenth on the bigger planes but dont like the slop of metal gears. also i dont ant to spend 100 buck on 1 dam servo if you know what i mean thanks _____________________________ www.flyingaeros.com Hide Signatures
Posted on: 3/5/2011 12:28 PM by Author "emilsanto" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=10380732

Hitec vs other brands metal gear servos?
i am thinking of upgrading some of my older hitec 605 metal gear servos. on my cap232 and a giles 202 Are the any brands that are totaly metal geared.? not like hitec's metal gear set with the plastic drive gear. thats were the problem is on my hitec sevos' the plastic gear wears real fast and then the servo will fail. i thought about the hitech karbolite sevos but i here problems about them on 1/4 scale planes. i am worried about servo gear strenth on the bigger planes but dont like the slop of metal gears. also i dont ant to spend 100 buck on 1 dam servo if you know what i mean thanks
Posted on: 3/5/2011 12:26 PM by Author "emilsanto" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=10380727