RE: ESC or Motor problem?(video)
could be either.... that is a timing issue... try to program the ESC to a different timing and see what happens.
Posted on: 8/7/2012 11:36 AM by Author "exeter_acres" in the forum "E-Flight Power Sources"
http://www.rcuniverse.com/forum/fb.asp?m=11184459

RE: Servos
[quote]ORIGINAL: pilotpete2 Yes. Pete [/quote] Yep
Posted on: 8/5/2012 4:08 PM by Author "exeter_acres" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11182059

RE: My 450 tail jerks violently all of a sudden!?
loose belt or gears to the tail?
Posted on: 7/27/2012 10:48 AM by Author "exeter_acres" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=11171370

RE: Futaba R6014HS Rx- how to change modes?
1 Turn off the receiver. 2 Press and hold the link/mode switch and turn on the receiver. Keep the switch hold more than one(1) second. The LED starts flashing with the current status. 3 Release the switch. 4 Turn off the receiver. unless you are flying a heli.. and considering entering the XFC... it is not needed... ;)
Posted on: 7/26/2012 12:50 PM by Author "exeter_acres" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11170252

RE: watts needed
150 to 200 watts per pound for 3D
Posted on: 7/25/2012 6:13 PM by Author "exeter_acres" in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=11169349

RE: Hobbieco servo replacement parts.
I don't know if they have them, but contact the folks at Hobby services directly http://www.hobbyservices.com/ Just because it isn't on tower doesn't mean it doesn't exist.
Posted on: 7/20/2012 5:29 AM by Author "exeter_acres" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11162247

RE: Wanted to buy Cell Pro 10s charger
[quote]ORIGINAL: turnnburn Wanted to buy new or near new Cell Pro 10s charger. [/quote] thanks for keeping us in the loop. ;)
Posted on: 7/17/2012 8:42 AM by Author "exeter_acres" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11158600

RE: futaba 3010 servos
just sounds like a bad extension
Posted on: 7/15/2012 11:01 AM by Author "exeter_acres" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=11156102

RE: beware Hobbyking warranty claims
but hey... you got a great deal on it!
Posted on: 7/14/2012 6:47 PM by Author "exeter_acres" in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=11155501

RE: HOBBY KING 1300mm Lancaster LEMON Hobby Kings worst release yet ?
like I said on FG... but Hey.. you got a great deal on it.....
Posted on: 7/5/2012 3:38 PM by Author "exeter_acres" in the forum "Electric General Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=11144439

RE: Need 80cc engine.
DA-85
Posted on: 7/2/2012 2:48 PM by Author "exeter_acres" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11140297

RE: 2012 Youth Masters at Triple Tree!
Getting closer... Lets see...an event for the kids.... focusing on the family... fun... a bit of healthy competition...... Triple Tree Aerodrome to ourselves.... the water in the river perfect temperature for an afternoon at the beach...... life long friends..... special appearances from some of the "big guys" in R/C.... what's not to like for this Excellent event...?
Posted on: 7/2/2012 2:43 PM by Author "exeter_acres" in the forum "Events, Shows and Fun Fly's - Airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11140293

RE: real plane 3D question
rc'ers call it a pop top...been in RC for a long time
Posted on: 6/30/2012 10:15 AM by Author "exeter_acres" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=11137687

RE: 1st U.S. RC Flight School
[quote]ORIGINAL: GaryHarris Ok, I just googled them, and this is legit, but it's not for beginners. This is for advanced pilots. [/quote] not true http://www.rcflightschool.com/Solo_Course.html
Posted on: 6/28/2012 12:19 PM by Author "exeter_acres" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=11135327

RE: F3a The Future
[quote]ORIGINAL: David Smith , and we know that turning up with a little 60 model will get us laughed at! [/quote] forgive me.. I admit I have not read all of the posts.... but seems the above quote could be a root of many problems..... if it is in fact true
Posted on: 6/28/2012 11:24 AM by Author "exeter_acres" in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11135258

RE: Are all RC forum's activity in decline?
Service Unavailable HTTP Error 503. The service is unavailable.
Posted on: 6/28/2012 9:14 AM by Author "exeter_acres" in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=11135117

RE: Starter for gas engine
flip it by hand....
Posted on: 6/28/2012 7:08 AM by Author "exeter_acres" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11134996

RE: Starter for gas engine
[quote]ORIGINAL: rightflyer but someone told me it spins my engine too fast. [/quote] stick with this person.. they appear to be a great source of entertainment for years to come [;)]
Posted on: 6/27/2012 5:22 PM by Author "exeter_acres" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11134413

RE: Are all RC forum's activity in decline?
An Unexpected Error Has Occurred We apologize for the error. An email with your issue has been sent to our admin team. In the meantime, check these hints on what to do: For additional support, click the "Help" link atop this or any page or fill out a trouble ticket describing what happened. DID YOU GET HERE FROM A LINK OUTSIDE RCU? If so, it's likely the link is bad. Start at the home page. IF YOU WERE BROWSING RCU OR CREATING A POST, RETRY! Click the "Refresh" or "Reload" button on your browser and try again. That fixes some errors. IMAGE UPLOAD ERRORS. If you were uploading an image in the market area, please check to ensure that there are no illegal characters in the file name (e.g. * / ? ' ") and that the image is a proper gif or jpg image. Also, if the size is very large, reduce the image before uploading. AD POSTING ERRORS. If you were posting an ad in the market area, click here to resume your listing. IMPORTANT: You cannot edit or begin an ad by typing in one of the listing pages or using your browser's history list to return to an old one. SEARCH ERRORS. If you got this error performing a search on the site, it is possible that you entered a term like "any", or "all" or something generic that the search tool "choked" on. If so, try to be more specific or use the pulldown menus to narrow your search. Click here to return to the page you were on. URL COPY AND PASTE ERRORS. If you pasted a URL string into your browser to get to a page, be careful that it is a COMPLETE STRING. Otherwise you will get errors. Your best bet is to click into the page. CLUBS AREA ERRORS. If you were having trouble in the Clubs area, we are working on those issues now. POP UP BLOCKER ISSUES. If you have a pop-up blocker, set it to allow pop-up windows from this site. We DO NOT have pop-up ads. All windows that pop up do so only when you activate them and they serve to provide you with functionality - NOT ADS. SECURITY ISSUES. Check your firewall/Internet security settings. Make sure RCU is on the trusted list. There is no adware or similar software anywhere on our servers. Please be aware that we are working on all issues. For additional support, click the "Help" link atop this or any page or fill out a trouble ticket describing what happened.
Posted on: 6/26/2012 2:43 PM by Author "exeter_acres" in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=11132863

RE: Dan Knippen
I consider Dan a friend.. and he is one of the nicest people I think I may have ever met.... He will be missed.... Prayers to his family
Posted on: 6/26/2012 12:32 PM by Author "exeter_acres" in the forum "IMAC"
http://www.rcuniverse.com/forum/fb.asp?m=11132694

RE: Help gettling more smoke out of my gasser
what engine? that pump should be fine.... you may not be getting the oil hot enough
Posted on: 6/26/2012 11:05 AM by Author "exeter_acres" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11132571

RE: which servo tester to get......
[quote]ORIGINAL: countilaw I am thinking about getting a  servo tester.   I've never used one before,  really never thought I needed one and still don't.   I've always just plugged my servos into the receiver and adjusted with the  transmitter.   But,  I was thinking about getting one and have found many different types available.    Most of my servos are Hitec 425BB,  Jr sport,  futaba 3003, and a few  micro.    All are analog.    What are some of the advantages of having a  tester?        Frank [/quote] why do you feel you need one?
Posted on: 6/25/2012 3:44 PM by Author "exeter_acres" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11131616

RE: control horns with ball joints HELP!!!
http://www3.towerhobbies.com/cgi-bin/wti0095p?FVPROFIL=&FVSEARCH=turnbuckles&search=Go
Posted on: 6/22/2012 8:34 AM by Author "exeter_acres" in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=11127704

RE: 7.4 volt servo system
umm..you need a 2 cell... liIon or a 2 cell LiPo and servos that are designed to handle it... thats it...nothing else needed
Posted on: 6/21/2012 5:45 PM by Author "exeter_acres" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11127131

RE: Interesting experience with Tower Hobbies
what did Tower say Before you posted on the internet?
Posted on: 6/15/2012 6:22 AM by Author "exeter_acres" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=11119007

RE: landing gear for profile, fiberglas or?
http://www.ohiomodelplanes.com/tetherite/
Posted on: 6/7/2012 8:47 AM by Author "exeter_acres" in the forum "Profile and Fun Flying Planes"
http://www.rcuniverse.com/forum/fb.asp?m=11110031

RE: RC Live online shows
http://www.rcradionetwork.com/ best there is!
Posted on: 6/5/2012 5:20 PM by Author "exeter_acres" in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=11107900

RE: SIG's Website
not working any more for me... at is not a page issue... that is a DNS issue. I'm guessing....
Posted on: 6/5/2012 9:59 AM by Author "exeter_acres" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11107356

RE: SIG's Website
works now... didn't work earlier for me.....
Posted on: 6/4/2012 4:24 PM by Author "exeter_acres" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11106409

RE: ICE 85 ESC
http://www.castlecreations.com/support/documents/Phoenix_User_Guide.pdf about half way through are the directions for manual programming...
Posted on: 6/4/2012 11:25 AM by Author "exeter_acres" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11106078