st blaze
i fly petrol planes but wanted to have some fun flying so i got a st blaze glider 5 mins to put together never flyed a glider or electric the blaze love the wind easy to take off bye hand flys great very cheap to buy great fun it is not hard to land in a wind but hard with no wind putting crow in have yet to use it yes it will tip stall at low speed like any other plane well done st great glider great price
Posted on: 5/31/2012 4:02 AM by Author "flying.2006" in the forum "RC Gliders, Sailplanes and Slope Soaring"
http://www.rcuniverse.com/forum/fb.asp?m=11100926

RE: global mx2-50
global-reedwing-goldwing all the same planes
Posted on: 2/4/2012 1:19 AM by Author "flying.2006" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=10942982

RE: global mx2-50
ok landing gear or Undercarriage
Posted on: 2/2/2012 7:17 AM by Author "flying.2006" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=10940056

global mx2-50
Hi all, just a quick question for you guys with Global RC aircraft,mx2-50 particually the lads with 50cc'ers.......How are your UC's holding up? Any cracking or delamination? Any chips in the paint work e.t.c? or just any problems in general? Im sure im worrying about nothing as usual.
Posted on: 2/2/2012 2:03 AM by Author "flying.2006" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=10939784

RE: 50cc MX2 Green - Global
do you fly one what about the landing gear is it stronger than the old design, will it hold up on the mx2-50
Posted on: 1/26/2012 8:16 AM by Author "flying.2006" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=10928697

50cc MX2 Green - Global
50cc MX2 Green - Global with a DLE-55 Petrol Engine how will it fly is the landing gear up to job as told not very strong am using a123 batts told thats the way to go. have got a ww1 plane haniball 1/4 scale with a Zenoah ZG38SC 38cc Petrol Engine. and a yak 54 aeroworks with a petrol 26 evolution gx in. i think the mx2-50 will me ok for me to fly will it be a hand full told as bigger it will easy to fly and land slow hope they are wright any info you have about this plane is this plane to big for me and powerfull hope not as my 1st big plane
Posted on: 1/25/2012 6:58 AM by Author "flying.2006" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=10926707

Hangar 9 hi is this a good Taylorcraft 26cc BNF
hi is this a good all round plane is the landing gear up to the job Hangar 9 Taylorcraft 26cc BNF - Instock [HAN4920] £800.00 £660.00 is this a good price Taylorcraft 26cc BNF Key Features Comes with a Zenoah 26cc engine Six Spektrum S6000 digital servos and one AR8000 Spektrum receiver pre-installed Scale tubular fuselage construction, full body pilot, and UltraCote® trim scheme Includes a CNC aluminum spinner and Evolution propeller Overview The Taylorcraft was one of the first affordable civilian airplanes available to pilots in America. Manufactured by Taylorcraft Aviation, the history of the Taylor brothers and their mark on aviation dates back almost seventy years. This particular Taylorcraft is a clipped wing design for better aerobatics, and features a conventional layout and fabric covering. It is a two-seat aircraft and the basic design has remained unchanged since 1936, and is still available as a personal sport aircraft today. Hangar 9 brings a version of this popular model in a first-of-its-kind Bind-N-Fly (BNF) version, allowing for less time building and more time flying. Featuring incredible details, an extreme level of completion and a full body pilot, pilots will be very satisfied with this exciting giant scale release. With the included Zenoah 26cc engine, six Spektrum S6000 digital servos throughout and a pre-installed AR8000 Spektrum receiver, the assembly time is cut from hours to minutes. It will take longer to charge the batteries for flight than to do what’s left of the aircraft assembly. Add the value of genuine Hangar 9 UltraCote® and this is one airplane that all giant-scale pilots will want in their hangar. Needed to Complete All you need is a 6+ channel DSM2-compatible transmitter.
Posted on: 10/19/2011 11:49 AM by Author "flying.2006" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10773333

RE: Flair Hannibal 91' (2310mm) Span
specs for the 38 SPECIFICATIONS ZG38 SC Capacity 38cc Bore 38mm Stroke 33mm Power ( Std Exst ) 2.6PS Length ( Inc.mount ) 168mm Height ( Inc plug cap ) 150mm Weight ( Inc Exst ) 4lbs specs for a Zenoah ZG26Ei 26cc Petrol Engine [ZG26EI] £269.99 Specifications: Displacement: 25.4 ccm Bore: 34 mm Stroke: 28 mm Power: 2.3 hp Torque: 1.5 Nm Power with tuned pipe: > 3 hp Weight: 1,166 g with engine mount. Weight: 1,362 g with engine mount, ignition and intake trumpet. Weight: 1,527 g complete with engine mount, ignition, intake trumpet and muffler.
Posted on: 10/7/2011 9:43 AM by Author "flying.2006" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10753156

Flair Hannibal 91' (2310mm) Span
Flair Hannibal 91' (2310mm) Span thinking a new Zenoah ZG38SC 38cc Petrol Engine is right for this plane or is it to big or do i get the Zenoah ZG26Ei 26cc Petrol Engine the 38 is cheaper and runs a 22/8 prop as this is a slow flying plane it will look better wot do you think
Posted on: 10/7/2011 6:56 AM by Author "flying.2006" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10752865

Quadra 35cc Petrol Engine
Quadra 35cc Petrol Engine do i run it on 50/1 oil mix if it is not run in what mix do i use do they run any good and tick over well in Flair Hannibal 91' (2310mm) Span One Piece Wing
Posted on: 9/21/2011 8:06 AM by Author "flying.2006" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10727261

Quadra 45 Petrol Enginel spairs
can you tell me if i can get Quadra 45 Petrol Engine spairs in the u/k like a spark plug
Posted on: 9/21/2011 3:35 AM by Author "flying.2006" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10726973

QUADRA 45 petrol engine
has any one had one QUADRA 45 petrol engine do they run ok where to get new spark plug or spaires as i am in the u/k
Posted on: 9/19/2011 5:13 AM by Author "flying.2006" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10723680

RE: RedWing Rc 30cc Mx2
so the landing gear was not up to job but i still lost £250 pounds due to poor landing gear from reedwing
Posted on: 6/18/2011 9:23 AM by Author "flying.2006" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=10580366

RE: RedWing Rc 30cc Mx2
so are you saying you can land every time pervect as not many can say that. i hold a b cert and can not
Posted on: 6/18/2011 5:42 AM by Author "flying.2006" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=10580100

RE: RedWing Rc 30cc Mx2
the landing was not hard so why are other mx2-30 breaking they landing gear as well i am not the only one who has had this
Posted on: 6/18/2011 5:38 AM by Author "flying.2006" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=10580092

RE: CRRC 26R Spark Plug Alternatives.
Having run in my new CRRC 26R engine i think this is a very good engine 3.2 hp runs very well i was the 1st in the club to have one now 9 of use have got one i paid £130 with post to my door
Posted on: 6/17/2011 1:05 PM by Author "flying.2006" in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=10579097

RE: RedWing Rc 30cc Mx2
what about the landing gear very week this plane is ok if you fly off short smoth grass but if like my one not very good i fly mye 4 times on landing gear all ripped out lots of damage write off wot a waste of money will i bye again from reedwind NO. This plane is by far one of the weakest 3d 30cc planes out there i am not the only one to say this
Posted on: 6/17/2011 12:48 PM by Author "flying.2006" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=10579057

wot 4 XL what servo do i use
wot 4XL with a dle 20 or may be 26R-crrc what servo do i use will i have to cut a lot of the cowl out
Posted on: 5/20/2011 11:18 AM by Author "flying.2006" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10531330

RE: crrc 26R-dle20
has any one put a 26R crrc in a wot 4 XL i no a dle 20 will fitt
Posted on: 5/19/2011 2:07 AM by Author "flying.2006" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10528875

crrc 26R-dle20
looking for a new petrol engine crrc has got a new 26R is it any good are you flying with one its only £130 but is the dle 20 better as only £180. more do i bye the dle20. £50 more money or go for the 26R crrc as both the engine will fitt my new plane wot 4 XL
Posted on: 5/18/2011 12:00 PM by Author "flying.2006" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10527671

RE: AW Yak 120QB- 120AX or 160FX or DLE30
i have the same plane with a 26 evolution petrol i think a dle 20 is to small the dle 30 will not be a easy fitt as stand offs to long but will fitt this is why i went with the evolution as on nitro mounts and no cutting the fire wall if you are 3d flying dle 30
Posted on: 5/18/2011 11:46 AM by Author "flying.2006" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10527647

RE: 35cc Extra 300 ARF-QB Quick Build
sorry got post wrong it was £84 on the extra 35cc still saved a lot of money
Posted on: 4/29/2011 10:47 AM by Author "flying.2006" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=10491545

RE: 35cc Extra 300 ARF-QB Quick Build
yes you can get it in the uk but i got it £160 less from aero-works why pay the extra £300 plus post £50 or £460 uk shop plus post £30 i have the aero-works yak 90-120 price from aero-works £228 plus post. uk shop £330 plus post
Posted on: 4/29/2011 2:01 AM by Author "flying.2006" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=10490971

35cc Extra 300 ARF-QB Quick Build
35cc Extra 300 ARF-QB Quick Build a big thanks to aero-works i live in the uk only took two weeks from you. to my door very fast post very happy i am putting in a 40 evolution petrol in is it better side mount or inverted will i be tail heavy is it a good stong landing gear or do i beaf it up fist i am flying a 90-120 aero-works yak 10.5lbs so will it be harder to land as this one is about 15lbs as this will be my biggest plane so far
Posted on: 4/25/2011 3:08 AM by Author "flying.2006" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=10483386

RE: Aeorworks Yak 54 120 size
i have a. a-w 90-120. with a 26 evolution petrol not bad but a dle 20 is small for this plane
Posted on: 4/13/2011 11:58 AM by Author "flying.2006" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10460616

RE: Better airplane- AW Yak 90-120QB or 30cc Sbach
easy a-w yak 90-120 very well made cost more but you get more. model flys well under carrage do not fall to bitts on landing 5 stars for this plane lots of wood on this plane to put swichs fuel dot i fly this model yak 90-120. global redwing cost less but very weak most of the wood has been taken out no wear to put swich fuel dot and if you dont land it soft each time it will be your last. landing gear will snap and lots of damage it fly well but it wood at only 8.5 lbs as most of the guts taken out stay away off global redwing kits unless you land on smoth grass and soft landing every time
Posted on: 4/8/2011 3:58 AM by Author "flying.2006" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=10450609

RE: GMP'S GoldWing MX2 The Green Machine
if you dont beef up landing gear 1st flight will be last flight had only 5 flights with my mx2-30 on grass landing gear ripped off lots of very weak wood in this plane my one is not repairable sent photos to global redwing they did not replace it will not bye a global kit again as so week to much wood taken out which makes it very weak good luck with yours
Posted on: 4/2/2011 6:16 AM by Author "flying.2006" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10437924

what one is better new 30cc Extra 300 ARF- QB or 35cc Extra 300 ARF-QB
what one is better new 30cc Extra 300 ARF- QB or 35cc Extra 300 ARF-QB both are aero-works please help do not no wot one to buy
Posted on: 3/14/2011 10:43 AM by Author "flying.2006" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10399150

what one is better to fly new 30cc Extra 300 ARF- QB or 35cc Extra
what one is better new 30cc Extra 300 ARF- QB or 35cc Extra 300 ARF-QB both are aero-works please help do not no wot one to buy
Posted on: 3/14/2011 10:40 AM by Author "flying.2006" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=10392944

yak 90-120
aero-works yak 90-120 very easy build and strong 5 stars to aero- works. only took 4 hours from start to finish with 26 evolution petrol i am so happy with it order a xtra 35cc petrol from aero-works to day. at the end of day you get what you pay for well done aero-works
Posted on: 3/13/2011 1:32 PM by Author "flying.2006" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=10397163