|
RE: Midwest Giant Sweet n Low
Setting throws, rudder capable of 55 deg Elevators next while waiting on hardware flynte
Posted on: 5/2/2012 9:45 PM by Author "flynte"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11066346
RE: Midwest Giant Sweet n Low
them and finished the cuts with a dremel cut disk, if that helps flynte
Posted on: 4/30/2012 11:44 AM by Author "flynte"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11062777
RE: Midwest Giant Sweet n Low
Fired up the mill one last time before taking it of the stand to mount. Get the servo and linkages layed out for the throttle. http://www.youtube.com/watch?v=mNDmHqVsuts&feature=g-upl flynte
Posted on: 4/28/2012 3:20 PM by Author "flynte"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11060453
RE: Midwest Giant Sweet n Low
and then I can sheet up the wings. flynte
Posted on: 4/26/2012 11:56 AM by Author "flynte"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11057786
RE: Midwest Giant Sweet n Low
Got the rear servos placed, just can't bring myself to bring in the tail yet! flynte
Posted on: 4/18/2012 9:03 PM by Author "flynte"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11048047
RE: Balsa USA 1/4 Scale Nieuport 28 Build
Glad to see gasser is the route. Looks like a GREAT build, subscribed!! flynte
Posted on: 4/15/2012 2:38 PM by Author "flynte"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11043115
RE: Midwest Giant Sweet n Low
back to the shop this afternoon and get some more done! flynte
Posted on: 4/15/2012 11:31 AM by Author "flynte"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11042923
RE: Midwest Giant Sweet n Low
. So for now I'll tinker on some sanding for now. flynte
Posted on: 2/28/2012 11:35 AM by Author "flynte"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10980214
RE: Winter Build Thread
After finishing gas conversion of my P6-E Hawk, a Midwest giant Sweet n Low Stik with a 53cc twin flynte
Posted on: 11/13/2011 6:02 PM by Author "flynte"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=10810661
RE: Midwest Giant Sweet n Low
at the same time. flynte
Posted on: 10/6/2011 4:56 PM by Author "flynte"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10752007
RE: building board
...that should sturdy up the pins nicely! THANKS for sharing!!!! Great idea!!! flynte
Posted on: 10/6/2011 4:16 PM by Author "flynte"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10751948
RE: XYZ 53-STS Twin
Just picked mine up at the postal outlet! Got a 26cc with it also. Have to get them unpacked after work tonight. flynte
Posted on: 9/22/2011 11:45 AM by Author "flynte"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10729153
RE: What do the ARF guys do in winter?
I keep flying!!! and assembling, repairing and building! flynte
Posted on: 9/18/2011 10:40 AM by Author "flynte"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10722610
RE: Failed crop dusting job interview
Here's a short vid of it on the last stages of the bench before it got let outside. http://www.youtube.com/watch?v=zJUcR-cdgt8 flynte
Posted on: 9/9/2011 9:51 PM by Author "flynte"
in the forum "Crash & Rebuild"
http://www.rcuniverse.com/forum/fb.asp?m=10709639
RE: Failed crop dusting job interview
also [X(]. flynte
Posted on: 9/9/2011 4:34 PM by Author "flynte"
in the forum "Crash & Rebuild"
http://www.rcuniverse.com/forum/fb.asp?m=10709281
RE: Failed crop dusting job interview
Just using an older Saito 72...definitely not much verticle, but good enough for what the plane is. Must be something else with the 160t in it!! flynte
Posted on: 9/7/2011 4:46 PM by Author "flynte"
in the forum "Crash & Rebuild"
http://www.rcuniverse.com/forum/fb.asp?m=10706263
RE: SSE Throttle Control Ideas Needed
Usually in instances like that, I'll use cable ran inside of tubing http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXD862&P=7 flynte
Posted on: 9/6/2011 2:54 PM by Author "flynte"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10704585
Midwest Giant Sweet n Low
right now. As parts start to show up and the weather fails, I keep updating. flynte
Posted on: 9/5/2011 5:48 PM by Author "flynte"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10703204
RE: Failed crop dusting job interview
[quote]ORIGINAL: flycatch Hot dogging and AG cats don't mix. You caused your own crash. [/quote] For sure I was the cause. I got seduced by it! 3rd fight and it felt so good...I was the one that did take it there. When the teal covering comes off of back order, it will be back!!! flynte
Posted on: 8/24/2011 10:04 PM by Author "flynte"
in the forum "Crash & Rebuild"
http://www.rcuniverse.com/forum/fb.asp?m=10686059
RE: Use Thermometer to tune your glow engine.
save the money and buy an extra gallon of fuel and enjoy!!! flynte
Posted on: 8/15/2011 8:25 PM by Author "flynte"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=10672716
RE: Use Thermometer to tune your glow engine.
Just trying to stay on topic with the OP here. For planes, head temp is irrelevant...talk to some people at the field and they'll help and show how to tune. If no tach is available, you'll hear what there doing helping you out especially on 2 strokes. Four strokes are a slightly different breed and you'll need a tach available for initial tune. flynte
Posted on: 8/15/2011 7:52 PM by Author "flynte"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=10672669
RE: Use Thermometer to tune your glow engine.
In r/c glow powered trucks or cars you'll use head temp to make sure you don't over heat because you can't necessarily check rpm, but in planes, RPM check is the standard. With the vehicles I usually try to squeeze what I can out of them, in my planes I look for reliability and longevity out of the engines. flynte
Posted on: 8/15/2011 5:14 PM by Author "flynte"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=10672434
Failed crop dusting job interview
; AGL mark So I'll get started on the repair soon. Wing tubes and covering ordered. flynte
Posted on: 7/26/2011 8:21 PM by Author "flynte"
in the forum "Crash & Rebuild"
http://www.rcuniverse.com/forum/fb.asp?m=10640659
RE: Reactor Bipe Triple Bypass Surgery
Shimano, very nice work your doing there. Going to be a great structured plane!! Again, nice work! Hopefully the rest shows up quick, I know I'd be chomping at the bit to get'er back in the air flynte
Posted on: 7/18/2011 6:09 PM by Author "flynte"
in the forum "Crash & Rebuild"
http://www.rcuniverse.com/forum/fb.asp?m=10627610
RE: Got my first tree
Unfortunately, I took the camera off on the flight before I hit the tree. It would have been cool to capture it. For the camera, it is the GoPro Hero I got from Tower Hobbies http://www3.towerhobbies.com/cgi-bin/WTI0095P?FVSEARCH=traxxas+%3Cb%3Egopro%3C%2Fb%3E+r%2Fc+hero&search=Go flynte
Posted on: 7/15/2011 11:47 AM by Author "flynte"
in the forum "Crash & Rebuild"
http://www.rcuniverse.com/forum/fb.asp?m=10622621
RE: Got my first tree
Didn't realize how much water was around there till we started grabbing vids. Now I know where all those pesky skidders are coming from! Weathers heading for the worst and might hang in for a couple days. So in limbo tonight, so made a slide show of the repairs tonight while rigging up for a carb clean on one plane, and some maintenance on others till the weather turns flynte http
Posted on: 7/8/2011 9:35 PM by Author "flynte"
in the forum "Crash & Rebuild"
http://www.rcuniverse.com/forum/fb.asp?m=10612870
RE: Here is a gas airplane you will love to hear
WOW again....That just inspire a dream project for me. A Shoestring sized up for that 200 engine. Absolutely gorgeous sounding!! flynte ps...it'll be at least another 1 to 2 decades now before I think / dream turbines!! Can't watch it enough!!!
Posted on: 7/8/2011 8:35 PM by Author "flynte"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10612703
RE: Here is a gas airplane you will love to hear
WOW!!!........ flynte
Posted on: 7/8/2011 6:30 PM by Author "flynte"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10612648
RE: Picture of cub landing
I really like the covering scheme on it, very nice!!! I have a friend that's in a stand still trying to figure out a scheme for his cub. Have to show him this to spur on some ideas. Thanks for the pic!! Hope the landing was a good as the pic [sm=thumbup.gif] flynte
Posted on: 7/8/2011 5:51 PM by Author "flynte"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=10612581
RE: Got my first tree
N1EDM...here's a vid that was shot on the fight before the tree hit. I took the cam off on the next flight as I wanted to try some stuff and let another member take it for a rip while it was in the air. Mosquito's were crazy that night, so the was some episodes of crazy swatting going on during the flight. flynte http://www.youtube.com/watch?v=FYek0-L4iiQ
Posted on: 7/8/2011 5:28 PM by Author "flynte"
in the forum "Crash & Rebuild"
http://www.rcuniverse.com/forum/fb.asp?m=10612541
| 
