RE: New turbine ESC is show 0374M run time?
oh thats easy set the pump pw ignition 2 clicks higher mine is 23 regards, martin it is also in your manual
Posted on: 5/21/2013 9:11 AM by Author "frema" in the forum "KingTech Turbines International"
http://www.rcuniverse.com/forum/fb.asp?m=11518248

RE: New turbine ESC is show 0374M run time?
no , i had the same problem with the k60 i have found out that if the temp is higher then the 72 deg of ignite, that the ecu dont understand it what i did : i lowered the ignite 72, the end temp and now i dont have any problems before it refuses to go to the preheat phase but now its good i did 15 starts , and all where good but thats my findings Barry knows more[:)]
Posted on: 5/21/2013 7:43 AM by Author "frema" in the forum "KingTech Turbines International"
http://www.rcuniverse.com/forum/fb.asp?m=11518149

RE: K100 accel delay question
set your acc delay faster i know the k100 is very fast
Posted on: 5/20/2013 11:59 AM by Author "frema" in the forum "KingTech Turbines International"
http://www.rcuniverse.com/forum/fb.asp?m=11517341

RE: New turbine ESC is show 0374M run time?
no contact barry
Posted on: 5/19/2013 2:31 AM by Author "frema" in the forum "KingTech Turbines International"
http://www.rcuniverse.com/forum/fb.asp?m=11515804

RE: Kudos Kingtech service!
well ,i dont wanna convince you but i like the k100 more then the p100 much nicer sound great engine
Posted on: 5/18/2013 1:49 PM by Author "frema" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11515330

RE: Kudos Kingtech service!
well if you dont believe me then do 2 tests first one with kerosine with 5 % oil and then diesel with 5 oil and then i know you will never complain about running on diesel [:D]
Posted on: 5/18/2013 6:31 AM by Author "frema" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11515067

RE: Kudos Kingtech service!
oh , i didnt know this but its great that you are a kingtech dealer too have a nice weekend Regards, martin.
Posted on: 5/17/2013 1:29 AM by Author "frema" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11513944

RE: Kudos Kingtech service!
[quote]ORIGINAL: Ali In these times of regular RCU discontent I thought I might take the time to share some of the more positive experiences I have had when dealing with Kingtech Turbines. Now just to make it clear, I am Bias as hell as I sell the product, but then again I sell a bunch of other turbines through my store also. However. Right now. One name is really shining bright and that is Kingtech. I have yet to send a faulty turbine back. Out of those I have sold, only one has suffered from a faulty pump and even that was replaced no questions asked. The longest I have ever had to wait for an email response has still been less than 24 hrs. More often than not they are answered within the hour ( Time differences allowing) and on countless occasions Barry has phoned me at his cost to assist with set up questions on mine or customers Turbines. Just to top it off. I sold a K-100 this Monday. I advised the customer that we needed to order the turbine in for him and that it normally takes about 10 days from time of order to delivery. In fact its normally 7 but I like to allow a few days just in case. I have just had the pleasure of phoning the customer and telling him that Kingtech got it here ( post free I hasten to add ) in less than 3 full days! On top of that they answered some rather technical questions for this customer ( He is an experienced home builder who wanted to know some info on the internal construction and materials ) without hesitation! Well done Barry and Vera. Long may this level of service continue. Did I mention that I am now on my third Kingtech turbine in my demo models? All of which are performing as faultlessly as any other manufacturer of turbine that I am operating ( of which there are 9 in total ) [:D] Sorry if this comes across as a shameless plug, but I really do think these guys deserve it. I will admit to being sceptical when I first saw them appear on the scene, but I am happy to be proven wrong. Regards Al [/quote] Ali ,. when you at Pampa , do you fly with a k60g too? i will bring mine to run at pampa good engine , nice build also the k100g , perfect engine ,and great power have a nice weekend Regards, martin
Posted on: 5/16/2013 11:52 PM by Author "frema" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11513919

RE: Kudos Kingtech service!
[quote]ORIGINAL: VF84sluggo I feeling better and better about choosing a K60G! [:D] [/quote] you will love the engine specialy when you run it on diesel i have one too just to play with very nice engine and the support from Vera and Barry is great
Posted on: 5/16/2013 11:50 PM by Author "frema" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11513918

jeti speed controller
i know its not the right place to ask this ,but maybe there is someone who can help me i am searching for a jeti brushed speed controller jes 10 or simular with potentio meter it is important that is has the potentio meter i hope some one can help me Regards, Martin.
Posted on: 9/15/2012 7:18 AM by Author "frema" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11229210

RE: P140 RX feedback please
i just sold one for 1600 euro very good engine
Posted on: 8/29/2012 8:37 AM by Author "frema" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11210262

RE: Kingtech k100
me too i like differnt colours always red is a very nice colour , i realy like it maybe i will do some special paint on it when i can upgrate it to 12 kg
Posted on: 8/17/2012 4:55 AM by Author "frema" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11196627

RE: Kingtech k100
i hope they will not cahnege the colour , i like it a red hot engine hhahahaha it need flames on the cover, yellow ones
Posted on: 8/17/2012 4:41 AM by Author "frema" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11196613

RE: Kingtech k100
hahaha oh then yiou will buy it and put away in your jet so you cant see it only hear it [:)]
Posted on: 8/17/2012 4:40 AM by Author "frema" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11196610

RE: Kingtech k100
i think i buy one too i hope they sent it to netherlands i have an idea to upgrate it and have 12kg of thust out of it i think people will like that out of such a small engine
Posted on: 8/17/2012 3:48 AM by Author "frema" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11196586

RE: Question for P100-RX Owners
no you all are wrong itsnot the combustor ,or turbine wheel its the front jetcat doesnt do his home work there is to much gap between the intake and the compressor wheel i serviced so many engines from them , and all had the same mistake
Posted on: 8/5/2012 3:14 PM by Author "frema" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11181975

RE: Wren 44 gold
try new leads it can be that there is something wrong with them else i think your fed has burned maybe a short curcuit in the glowplug
Posted on: 8/2/2012 2:23 AM by Author "frema" in the forum "Wren Turbines USA"
http://www.rcuniverse.com/forum/fb.asp?m=11178141

RE: P-80 ECU Help
well you can try to reset the egt probe but i think its gone if you get an error message , the egt probe is broken you know how to reset the probe? Regards Martin.
Posted on: 7/23/2012 8:10 AM by Author "frema" in the forum "JetCat Turbine Direct Support"
http://www.rcuniverse.com/forum/fb.asp?m=11165693

RE: Frema's Toy turbine tractor
thank yoouuuuuu Gerald
Posted on: 7/23/2012 7:39 AM by Author "frema" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11165652

Frema's Toy turbine tractor
http://www.youtube.com/watch?v=F5VyW_jIOAg good run from the twin jetjoe junior powered tractor (4e place) Regards, Martin.
Posted on: 7/22/2012 9:13 AM by Author "frema" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11164465

RE: JetCat Startmotor Specs
thats right ,its 6volt they are better then the 7,2 volts
Posted on: 7/16/2012 3:42 AM by Author "frema" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11156979

RE: JetCat Startmotor Specs
just buy yourself a 6volt speed 300 dont make problem of it all the old jetcats have them even the p160 have them they last long , if you just thread them right
Posted on: 7/15/2012 11:04 AM by Author "frema" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11156106

RE: very hard day for me and my family
oh boy oh boy i saw it on the news its so terrible how is your famely , friends?
Posted on: 5/20/2012 12:55 PM by Author "frema" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11087830

RE: Fadec data terminal help?
where you can push the black pins in the switch there is a little space let a few drops of alcohol in there, and it will clean the contacts
Posted on: 5/18/2012 10:25 PM by Author "frema" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11086429

RE: Other
yes thats the video of the world champion ships in Ohio
Posted on: 5/18/2012 8:12 AM by Author "frema" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11085714

RE: Other
this is the last creation this tractor has two jetjoe juniors tuned up to 2,3kg of thrust the horse power is enough to let the tires spin 100km/h the tractor run in the light modified klass 3,5kg weight [IMG]http://i277.photobucket.com/albums/kk65/frema_2008/IMG_77601.jpg[/IMG] Regards, Martin.
Posted on: 5/18/2012 7:52 AM by Author "frema" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11085673

RE: Other
oh now i know how to do it i will post more [IMG]http://i277.photobucket.com/albums/kk65/frema_2008/IMG_26532.jpg[/IMG] [IMG]http://i277.photobucket.com/albums/kk65/frema_2008/P1010262-1.jpg[/IMG] The last one is a project for 2013 the first picture is the Heat and thats the world champion of 2010 regards, Martin.
Posted on: 5/18/2012 7:37 AM by Author "frema" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11085653

RE: Other
i will try agian sorry , still cant post pictures sent a pm to me ,then i give you my email then you see my tractors [IMG]http://i277.photobucket.com/albums/kk65/frema_2008/IMG_24252.jpg[/IMG]
Posted on: 5/18/2012 7:30 AM by Author "frema" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11085648

RE: Other
sorry , i can post pictures. i get an 500 error message
Posted on: 5/18/2012 1:16 AM by Author "frema" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11085355

RE: Other
yep i run for 13 years now with turbine tractor pullers i am still the only one in the world i have now 3 tractors
Posted on: 5/18/2012 1:06 AM by Author "frema" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11085351