RE: FSA Clubhouse
i am moving to az and trying to get in touch with dave to give him some old stuff. his phone just is a fast busy signal. can someone help me get a hold of him for the weekend. thanks chris
Posted on: 11/9/2006 10:58 AM by Author "fullscale" in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=4974551

RE: FSA Clubhouse
i found the thread, thanks kirk chris[8D]
Posted on: 4/12/2006 9:47 PM by Author "fullscale" in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=4158671

RE: uav pilot opportunity
snoop doggy bag, i sent a pm to you. post if you did not get it.
Posted on: 12/26/2004 10:24 PM by Author "fullscale" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=2471322

RE: uav pilot opportunity
thanks for the post spitfiremk1
Posted on: 12/26/2004 10:22 PM by Author "fullscale" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=2471314

uav pilot opportunity
My company is looking for UAV pilots. The work could be short or long term depending on many factors. The job requires travel in and outside the United States for extended periods of time. Experienced R/C pilots (5 years r/c, with 2 years giant scale, over 80"). US citizenship required. If interested please pm me. It is a great way to take a passion and turn it into a job. Are you up for the challenge?
Posted on: 12/25/2004 8:44 PM by Author "fullscale" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=2462892

RE: uav pilot opportunity
if interested pm me and i will email back a email address. thanks for all the interest.
Posted on: 12/25/2004 8:43 PM by Author "fullscale" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=2468266

RE: uav pilot opportunity
i am not sure were the negative comments come from but i can assure you that the experiences i have had are great and never once has there been a problem with pay or benefits. this has nothing to do with barstow California.
Posted on: 12/24/2004 10:57 PM by Author "fullscale" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=2466320

RE: uav pilot opportunity
current location in usa not important for job, since after training, you will be working outside the us. if still interested send me a pm, the food was good.
Posted on: 12/24/2004 9:10 AM by Author "fullscale" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=2464448

RE: uav pilot opportunity
good questions, if you are interested pm me
Posted on: 12/23/2004 8:41 PM by Author "fullscale" in the forum "IMAC"
http://www.rcuniverse.com/forum/fb.asp?m=2463215

RE: uav pilot opportunity
best thing to do is pm me and i willl send you my email in a private fashion
Posted on: 12/23/2004 8:40 PM by Author "fullscale" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=2463208

uav pilot opportunity
My company is looking for UAV pilots. The work could be short or long term depending on many factors. The job requires travel in and outside the United States for extended periods of time. Experienced R/C pilots (5 years r/c, with 2 years giant scale, over 80"). US citizenship required. If interested please email or pm me. It is a great way to take a passion and turn it into a job. Are you up for the challenge?
Posted on: 12/23/2004 6:47 PM by Author "fullscale" in the forum "IMAC"
http://www.rcuniverse.com/forum/fb.asp?m=2462884

uav pilot opportunity
. Are you up for the challenge? fullscale
Posted on: 12/23/2004 6:46 PM by Author "fullscale" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=2462881

RE: housefly vs other sub micro heli...need help
thanks for the help. i am looking at three different ones and trying to justify the difference in cost. the ones are the housefly...will not work with regular transmitter, the bumble bee by mia...works with futaba or what ever, can go brushless but the most expense by several hundreds of dollars, and last the heli-max rotofly...works with futaba but are you getting what you pay for in other words, to good to be true at around $300. looking for some more help to try and make a tough decision. chris
Posted on: 12/14/2004 12:10 AM by Author "fullscale" in the forum "Electric RC Helis"
http://www.rcuniverse.com/forum/fb.asp?m=2431527

housefly vs other sub micro heli...need help
Going to buy a sub micro helicopter, have looked at the new housefly from megatech and sub micro bumblebee, but would like to get one that has a future, ie collective and 3d possible. i have a lmh corona and am very comfortable flying it in a small place but hard to do much more than hover in a 4ft by 4ft flight box with it. beside it kick up a lot of dust in the living room. looking for suggestions. chris
Posted on: 12/13/2004 12:46 PM by Author "fullscale" in the forum "Electric RC Helis"
http://www.rcuniverse.com/forum/fb.asp?m=2429265

RE: need help with os 8b carb
thanks very much
Posted on: 2/26/2004 11:21 PM by Author "fullscale" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=1569087

need help with os 8b carb
I recently got a os 77 df and it came with a os 8b carb. need help with setup, if anyone has the directions or can tell me what controls what i would be greatly happy. i think i have most of the carb figured out but there is a little confusion on the needle and the screw on the throttle side with a + - near it.
Posted on: 2/22/2004 9:47 PM by Author "fullscale" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=1554754

need help with byron f16 fuel system
I recently got a byrons jet and am restoring it to a flight ready status. The plane has been gutted and many items need to replaced. The fuel system is one of them. I need help in how to setup the fueling manifold, also if anyone has directions on how to set up the carb for a os 77 with adjustable mixuture, that would be great. thanks in advance for all the help.[8|]
Posted on: 2/15/2004 9:27 AM by Author "fullscale" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=1529696

Weston Magnum test flight, talk about, (&^%*#(*(!#*&% well, come read :D
used a 12oz sullivan flex tank
Posted on: 5/26/2003 12:07 AM by Author "fullscale" in the forum "Extreme Speed Prop Planes"
http://www.rcuniverse.com/forum/fb.asp?m=795895

LMH aerobatics, loops and rolls
There is nothing better than doing a loop. I just went brushless and it made all the difference in the world. Thanks for the hints on how to. chris
Posted on: 5/22/2003 3:04 AM by Author "fullscale" in the forum "LMH Helicopter"
http://www.rcuniverse.com/forum/fb.asp?m=702847

40-3p speed control question
I just got my brushless system, should have done it months ago. My speed control has a brake and no brake mode, did they send me the wrong speed control? Does the heli speed control say heli some where on it? thanks for the help. chris ;)
Posted on: 5/18/2003 3:15 PM by Author "fullscale" in the forum "LMH Helicopter"
http://www.rcuniverse.com/forum/fb.asp?m=781927

Blade Colors and Rotor Visibility
can't see the blades as much as you can see the white balance tape.
Posted on: 4/25/2003 4:16 AM by Author "fullscale" in the forum "LMH Helicopter"
http://www.rcuniverse.com/forum/fb.asp?m=714707

Blade Colors and Rotor Visibility
i will take some pics but it my be hard to hover and take the picture at the same time. chris
Posted on: 4/23/2003 1:45 AM by Author "fullscale" in the forum "LMH Helicopter"
http://www.rcuniverse.com/forum/fb.asp?m=714702

Blade Colors and Rotor Visibility
i fly with the trans blue ones. They can be seen ok and with white balance tape it causes a nice circle effect. :D chris
Posted on: 4/23/2003 1:35 AM by Author "fullscale" in the forum "LMH Helicopter"
http://www.rcuniverse.com/forum/fb.asp?m=714700

Need help giantscaleplanes corsair 75.5 what colors do they use
Thank you for the help and the ideas. At our club is a guy that works with the aero space museum in dulles and gives tours. he provided me with a great book and i have read through it. I was hoping someone knew the color they painted with when they made the arf. I am not the best at color matching and want to make it look good but does not need to be great. I got the model so i could particpate in our clubs warbird flying but not much more than that. It will not fly very scale with the engine i am putting in it and just trying to touch up some hanger rash. thanks for the help so far. chris
Posted on: 4/18/2003 1:33 PM by Author "fullscale" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=703892

Need help giantscaleplanes corsair 75.5 what colors do they use
I have recently got a model from a friend and it needs to be finished. I need help with what colors they use to make the kit. Anyone have any idea. Could really use the help. chris :cool:
Posted on: 4/18/2003 4:05 AM by Author "fullscale" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=703889

Magnum Q`s
mine also diver over in the turn anything past 45, talking to the jet guy they this is normal for jet and i assume that is fine for the magnum. If it is not so then i would be interested also. :rolleyes:
Posted on: 4/17/2003 12:50 AM by Author "fullscale" in the forum "Extreme Speed Prop Planes"
http://www.rcuniverse.com/forum/fb.asp?m=700235

Speed Freaks Wanted
I not sure about 200 but it is fast, may be racing a pylon racer this weekend. The pilot is Jonathan and he completes in racing and knows his plane does around 200. we will see who will win.
Posted on: 4/11/2003 1:43 PM by Author "fullscale" in the forum "Extreme Speed Prop Planes"
http://www.rcuniverse.com/forum/fb.asp?m=530761

Speed Freaks Wanted
"Hi, my name is Chris, and I am a Speed Plane Addict. I have been a Lover of Speed Planes for many months/years, and with the help of the Revvers Brotherhood I hope to make my planes even FASTER !!! Signed chris :rolleyes: Have had several fast planes, now have the magnum. lost a plane doing over 100 mph great wreck. :D Revvers Brotherhood member #25 :D ................"Rev on my Brothers"....................
Posted on: 4/11/2003 3:06 AM by Author "fullscale" in the forum "Extreme Speed Prop Planes"
http://www.rcuniverse.com/forum/fb.asp?m=530758

some help from the experts it worked for me
i called lite machines and they had some strange suggestion but he was right on when i looked at my set up. The first thing he said to check was the front tr gear to spur gear on main shaft alignment. mine was ok. the next won was the winner. Ckeck the main rotor hub and if you have over tighten the "jesus bolt" or the bolt through the hub it will have a small buldge underneath it and cause vibration. he reminded me that there should be about 10deg slope in the main rotor rotation to the shaft rotation. i hope this helps because that was my problem and no the vibration is minimal. once again a fix for less than $10 and about a 1/2 hour rebuid time. chris:stupid:
Posted on: 3/29/2003 4:59 AM by Author "fullscale" in the forum "LMH Helicopter"
http://www.rcuniverse.com/forum/fb.asp?m=593964

restate question
OK this thread has not gone so well, forget the landing part. we land great. i really want to know if it is worth cutting up the $40 manifold for more performance? If it only increase a small amount than i will not do it, but if it is night and day difference then that sucker is cut in a heartbeat. Please help with this question. chris
Posted on: 3/24/2003 2:07 PM by Author "fullscale" in the forum "Extreme Speed Prop Planes"
http://www.rcuniverse.com/forum/fb.asp?m=636600