RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Hey John, got the wings for the f-35 you sent me. Thanks! In still tryingto replace my fuselodge, nosecone, and rear elevators. Do you have any I can order? I noticed you have some rtf kits still. If yu are willing to remove the electronics I will but the foam kit from you guys.
Posted on: 10/29/2009 8:35 AM by Author "gabe_tuft" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9211805

RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Just got and flew my Super Cub - fun and easy plane! However, on the second flight I lost one of the landing gear wheels on takeoff and to order some replacement parts: QTY Part number and name 1 CUB004 Pushrods 2 CUB007 Landing Gear 1 DYP-1003 propellor Thanks!
Posted on: 10/28/2009 8:08 PM by Author "gabe_tuft" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9198804

RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Thanks John!
Posted on: 10/9/2009 9:53 PM by Author "gabe_tuft" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9160602

RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Can you please point me towards a link for breaking in the edf and balancing the rotors? I may just buy a whole new f-35 from u guys and keep the other one for parts. Unless you can recommend a better edf plane. I chose the F-35 based on Dave Herbert's review.
Posted on: 10/6/2009 12:18 PM by Author "gabe_tuft" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9151164

RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Well, no harm no foul then. How long till your spare parts for the F-35 come back into stock? The rotors are outb of stock along with most of the foam. Thanks.
Posted on: 10/6/2009 10:01 AM by Author "gabe_tuft" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9150830

RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Well, only a newbie to planks. Been flyin helis for a while now. So I'm no rc newbie. I'm not gonna stop buying stuff from you guys (yet), cause you have good stuff at good prices. But man, that's awful customer service - and obviously you don't care. Bad advertising too.
Posted on: 10/5/2009 6:09 PM by Author "gabe_tuft" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9149194

RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
That kind of defeats the purpose of "Ready To Fly". I shouldn't have to take an rtf jet apart and sand the blades. Please send me the replacement blades and I will take the thing apart myself.
Posted on: 10/5/2009 5:33 PM by Author "gabe_tuft" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9149097

RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Had my Edf f-35 jet for about 3 or 4 weeks and I love it! But today before I even got in the air the jet stopped moving on takeoff. Apparently all the fan blades had snapped. Motor still turns just fine. Can u please send a replacement? If it can't be removed and replaced without opening the fuselodge I think it's only fair to send a new one out as well. Thanks! Gabe Tuft
Posted on: 10/5/2009 10:12 AM by Author "gabe_tuft" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9147912

RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Order No 633056 ExceedJet_06A01-F35-Gray-24GHz I need to order a new left wong and new aileron hinges please. Also, I know you are out of stock for the rest of the foam, but when do you anticipate restocking? Thank you, Gabe Tuft
Posted on: 9/29/2009 12:08 PM by Author "gabe_tuft" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9133044

Exceed RC F-35 battery question
The F-35 comes with a 25C 1300mAh battery pack. I have an extra 15C 1300mAh battery pack at home. Will that work with it or will the plane not have enough power? Will I experience servo failures or brownouts during flight?
Posted on: 9/18/2009 9:06 PM by Author "gabe_tuft" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9106592

RE: Tracking number
I got it handled by Steve in the online chat section. Thanks anyways! I do have a question about the F-35. It comes with a 25C 1300mAh battery pack. I have an extra 15C battery pack at home. Will that work with it or will the plane not have enough power? Will I experience servo failures?
Posted on: 9/18/2009 9:05 PM by Author "gabe_tuft" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9106589

Tracking number
I ordered an F35 edf from nitroplanes and unfortunately did not receive a coon of my receipt or tracking number due to email problems on my end. May I please have both of those items emailed to a different address? Gabe Tuft New email: tylerreks@gmail.com Please let me know if further information is required for verification. Thank you.
Posted on: 9/16/2009 2:46 PM by Author "gabe_tuft" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9100808

RE: New Mini Electric is here the Falcon 3D!!
Ok. Thanks Michael!
Posted on: 4/17/2009 12:18 AM by Author "gabe_tuft" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8688841

RE: New Mini Electric is here the Falcon 3D!!
Ok. Thanks Michael!
Posted on: 4/17/2009 12:17 AM by Author "gabe_tuft" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8688836

RE: New Mini Electric is here the Falcon 3D!!
Got it! Everything is good now. New issue though. When I use my new 1800 maH 15C battery, I get wag and lots of it. If I put the stock 1300maH in there, no issues. Any ideas? CG is good, I moved the RX.
Posted on: 4/16/2009 1:45 PM by Author "gabe_tuft" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8687110

RE: New Mini Electric is here the Falcon 3D!!
The PLT knob only affects the maximum pitch range in normal mode. I was under the impression it is supposed to have some adjustment in 3D mode. As far as the pitch servo goes, no the pushrod is in the center of the horn. BUT, I noticed that the actual pitch arm wont extend any further and even though the servo can throw further, it won't affect the pitch. Weird, right?
Posted on: 4/15/2009 3:29 PM by Author "gabe_tuft" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8684369

RE: New Mini Electric is here the Falcon 3D!!
Hey guys, I finally went to set up/ check my pitch curve and I noticed that I'm only getting +6 to -6 in both normal and 3d mode. I've exhausted moving the PLT and PIT knobs around and I've also noticed that my pitch arm is maxed out in the positive direction. Any ideas?
Posted on: 4/15/2009 7:46 AM by Author "gabe_tuft" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8683130

RE: New Mini Electric is here the Falcon 3D!!
Michael, Thanks for all your help bro. I think I got it all figured out. I just had to go tinker and fly the bi$ch for a while. I got it dialed in now in 3d all the time. I really enjoy flying it. Thanks again! Gabe
Posted on: 4/12/2009 10:04 PM by Author "gabe_tuft" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8675258

RE: New Mini Electric is here the Falcon 3D!!
this helps. Gabe
Posted on: 4/12/2009 10:00 PM by Author "gabe_tuft" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8675242

RE: New Mini Electric is here the Falcon 3D!!
Well, tail wag came back, but I think I may have found the main source of my problem (I hope). The arm that clips onto the ball link on the tail slider had become loose. Its such a tiny screw that I didn't even see it. Virtually all of the wag is gone, but there is still some there - even with the gain turned way down. Actually, when I turn the gain way down, the wag gets really bad. Somewhere on the low side is OK, but not perfect. Now she rotates cw on me so I am giving her left rudder to stabilize. I'm using the 3D switch a lot now too. Also, here's another question, what does the PLT knob do on the right side of my transmitter? I believe it adjusts the pitch of the blades. How does that affect my 3D flight? I'm noticing that sometimes when I'm just above center stick, the bird will begin losing altitude and even if I punch the throttle, she wont climb until the skids hit the ground. This is of course, just at a hover. Thanks!
Posted on: 4/1/2009 10:11 PM by Author "gabe_tuft" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8640175

RE: New Mini Electric is here the Falcon 3D!!
Michael, Moving the servo pushrod one hole closer to the center of the servo did the trick. The wag is completely gone, HH works fantastic now. Thanks again for all your help! Gabe
Posted on: 3/31/2009 10:07 PM by Author "gabe_tuft" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8636768

RE: New Mini Electric is here the Falcon 3D!!
Hey guys, I was flying the Falcon 3D just fine yesterday and then I swapped to a new battery pack. As soon as I lifted off and started to yaw a little, I noticed a severe tail wag. Turned down the gain a little and its still there. Its so weird, if I trim down then it gets worse and if I trim up its noticeable and I feel like the gyro isn't holding well. Also, it seems to be related to the head speed. Less head speed it is hardly noticeable, and more head speed it gets REALLY bad. What the heck?
Posted on: 3/30/2009 7:20 PM by Author "gabe_tuft" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8632476

RE: New Mini Electric is here the Falcon 3D!!
binding or pushing so much on the tail boom that it bends. Hope this helps! Gabe
Posted on: 3/30/2009 7:36 AM by Author "gabe_tuft" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8630520

RE: New Mini Electric is here the Falcon 3D!!
help! Gabe
Posted on: 3/28/2009 9:42 AM by Author "gabe_tuft" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8625136

RE: New Mini Electric is here the Falcon 3D!!
[quote]ORIGINAL: xplorur hey guys sounds like you got your tecnical problems worked out Gabe,,cool I had to leave for a bit My GF was on the warpath[:)] Got the glow wire the other day, good deal, thanks for the heads up Michael. wont be able to install it yet,still working on getting her Right... the new blade grips work out Michael? Stay out of the wind Gabe Steve [/quote] Ha! I wish. Still waiting
Posted on: 3/23/2009 3:29 PM by Author "gabe_tuft" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8608038

RE: New Mini Electric is here the Falcon 3D!!
Ah, words of wisdom my friend.
Posted on: 3/22/2009 10:13 PM by Author "gabe_tuft" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8605509

RE: New Mini Electric is here the Falcon 3D!!
out all. Gabe
Posted on: 3/22/2009 5:10 PM by Author "gabe_tuft" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8604373

RE: New Mini Electric is here the Falcon 3D!!
Yeah, the gain is cranked all the way up - AND - I'm pretty sure the gain is independent for normal and headlock. I think I may just have a poopy gyro. Thanks for all your help, Michael. I will get in touch with Xheli and see what they say. Thanks again! Gabe
Posted on: 3/22/2009 2:43 PM by Author "gabe_tuft" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8603973

RE: New Mini Electric is here the Falcon 3D!!
Its the Art-Tech Efly 100C that came with this Falcon. Its so weird, the bird it trimmed up in normal mode, but when I throw the switch to headlock it creeps ccw quite a bit. Does it have anything to do with the DR switch on the right? I have it set to 0 right now and it doesn't seem to do anything if I switch it to 1 while in HL mode. [image]http://i149.photobucket.com/albums/s60/gabetuft/TX-100C.jpg[/image]
Posted on: 3/22/2009 8:53 AM by Author "gabe_tuft" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8602996

RE: New Mini Electric is here the Falcon 3D!!
Hey Michael, I edited my previous post before I saw your reply. Can you please have a look at it and comment. Still having issues man.
Posted on: 3/21/2009 9:45 PM by Author "gabe_tuft" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8601904