RE: Official HPI Savage Flux XS thread...
thoughts on this servo? http://www.ebay.com/itm/2X-MG995-Metal-Gear-2BB-Torque-Servo-for-HPI-Savage-XL-/280584163635?pt=Radio_Control_Parts_Accessories&hash=item41541e9133
Posted on: 7/24/2012 5:25 PM by Author "gdiddy13" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11167895

RE: Official HPI Savage Flux XS thread...
I also have the HR rear hubs after I bent up the others. Again flawless and have held up to my neglect and abuse. Buying the front HR hubs next
Posted on: 7/23/2012 8:40 AM by Author "gdiddy13" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11165738

RE: Official HPI Savage Flux XS thread...
[quote]ORIGINAL: cumminspower5.9 Hotracing.com has the HR ones I think you are talking about. How do those hold up? I only run my flux on 2s. [/quote] They have held up really well for me, and I use 2s only as well. I was surprised at how well they have done considering how fast the stock cups got beat down. But for some reason I've had really good luck with my truck, still on the original ESC and all that.
Posted on: 7/23/2012 7:30 AM by Author "gdiddy13" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11165647

RE: Official HPI Savage Flux XS thread...
[quote]ORIGINAL: cumminspower5.9 So I know some of you were talking about the heavy duty drive cups, but I can't find it here. I was driving and I split my front left drive cup right down the middle. I was to get a set of heavy duty center drive cups and heavy duty output drive cups at all 4 corners. Can someone help? I'd prefer something other than ebay for them. [/quote] I use the HR ones and haven't had a problem. Might still be available on Liquidrc .com or unfortunately Ebay, but I would buy again without hesitation
Posted on: 7/22/2012 6:28 PM by Author "gdiddy13" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11165066

RE: Official HPI Savage Flux XS thread...
What is the normal or target operating temp of our motors and ESC? and what is the cutoff set at?
Posted on: 7/21/2012 10:34 AM by Author "gdiddy13" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11163570

RE: Official HPI Savage Flux XS thread...
[quote]ORIGINAL: cumminspower5.9 [quote]ORIGINAL: gdiddy13 Can someone compare this setup to the stock? http://www3.towerhobbies.com/cgi-bin/wti0001p?&P=SM&I=LXBLBZ [/quote] Not sure how that is, but I got thinking...what about the castle system by duratrax? the 3900kv motor and sv2 esc? [/quote] Have a link for that setup?
Posted on: 7/20/2012 7:46 AM by Author "gdiddy13" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11162382

RE: Official HPI Savage Flux XS thread...
Can someone compare this setup to the stock? http://www3.towerhobbies.com/cgi-bin/wti0001p?&P=SM&I=LXBLBZ
Posted on: 7/19/2012 7:35 PM by Author "gdiddy13" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11161906

RE: Official HPI Savage Flux XS thread...
I feel like I'm always asking dumb questions, but thanks guys for not making me feel that way. I've been having a lot of heat issues, and I'm considering changing motors to alleviate this problem. I love this motor, and would love to stay as close to the performance of this motor as possible. I just clocked it the other day @ 42mph on 2s. Problem is, it is getting way to hot, and I don't want to "take it easy". I have more fun going all out. Is it possible to buy a new motor only, to run on the stock ESC without any problems, same performance, but less heat issues? I don't want to lose the waterproof aspect either. Has anyone used the CC motor shroud with the fan on it, for our motors?
Posted on: 7/18/2012 2:05 PM by Author "gdiddy13" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11160263

RE: Official HPI Savage Flux XS thread...
Anyone used this ? http://www.ebay.com/itm/HPI-Racing-Savage-XS-Flux-4WD-FAN-BLOWER-HEATSINK-HEAT-SINK-/190625904129?pt=Radio_Control_Parts_Accessories&hash=item2c62307601
Posted on: 7/3/2012 11:22 AM by Author "gdiddy13" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11141472

RE: Official HPI Savage Flux XS thread...
[quote]ORIGINAL: t9dragon [quote]ORIGINAL: gdiddy13 I think this may have been discussed before, but is there a way to run cooler temps on these motors? I did make a small cut in the faux battery box the motor sits in, and that has helped a bit. But I'm looking to cool it down even further. Thanks, [/quote] Run a fan on the motor. [/quote] Have any pics on how this is done? Type of fan etc
Posted on: 6/20/2012 12:59 PM by Author "gdiddy13" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11125542

RE: Official HPI Savage Flux XS thread...
I think this may have been discussed before, but is there a way to run cooler temps on these motors? I did make a small cut in the faux battery box the motor sits in, and that has helped a bit. But I'm looking to cool it down even further. Thanks,
Posted on: 6/20/2012 9:17 AM by Author "gdiddy13" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11125223

RE: Official HPI Savage Flux XS thread...
[quote]ORIGINAL: cumminspower5.9 [quote]ORIGINAL: rc theman Does anyone else have bad steering slop? Ive tryed almost everything but it's still there [/quote] In the end, just glue the damn things lol [/quote] When you say glue it, where exactly do you mean. Probablyl dumb question
Posted on: 6/20/2012 9:16 AM by Author "gdiddy13" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11125216

Blade cx2 battery questions
I have yet to fly my Blade CX2 because the battery is no good. I was wondering if I can use this battery:http://www.hobbypartz.com/77p-sl800-3s1p-20c-3333.html Is is ok to use an 11.1 volt battery? Or should I go with this : http://www.hobbypartz.com/77p-sl800-2s1p-20c-2222.html I'm sure this is easy stuff for you guys. Thanks in advance!
Posted on: 5/20/2012 8:21 PM by Author "gdiddy13" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=11088317

RE: A connector question
Think that pretty much answers it. Thanks!
Posted on: 5/19/2012 12:21 PM by Author "gdiddy13" in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=11086912

A connector question
Just got a new Heli that uses the "mini" connector. (hope I at least have that part correct) I already have a lipo charger for my Savage, to charge Lipos. My charger has a Dean's connector, my battery for the heli is obviously not the same. I understand I can solder up a Deans lead with a compatible(for the battery) mini connector. But here is my question. The heli factory charger, charges the battery with what looks like to me, just the "balancing" lead out of the battery. So if I do the above modification, then do I connect what looks like the balancing lead, to my balancing board on my charger. yikes! that seems like a lot, for what is probably a very simple answer! if this doesn't make sense let me know
Posted on: 5/18/2012 5:46 PM by Author "gdiddy13" in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=11086213

RE: where to bash in C'Bus Ohio??
oh yea, definately a good idea. but for some reason I'm not finding much as far as bmx or trails. I'll keep looking. I know there are places I just can't figure out how to find them
Posted on: 5/14/2012 4:58 PM by Author "gdiddy13" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=11080754

where to bash in C'Bus Ohio??
I think I'm posting in the right forum? I live in Columbus Ohio, and I don't race, but I'm looking for some places to bash. You know, your typical bashing spot, dirt hills, jumps etc. I've got a Savage XS, stampedes, and an emaxx. and the only place I found is a skatepark, which is really fun, but looking for some dirt! Thanks!
Posted on: 5/14/2012 1:49 PM by Author "gdiddy13" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=11080565

RE: Official HPI Savage Flux XS thread...
ugh, nevermind
Posted on: 5/14/2012 1:37 PM by Author "gdiddy13" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11080556

RE: Official HPI Savage Flux XS thread...
this is probably a dumb question, but can I bind more than one vehicle to our transmitter?
Posted on: 5/14/2012 1:27 PM by Author "gdiddy13" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11080539

RE: NEW!!!! Official Axial EXO buggy thread...
Been looking at this thing for a while. Just wanted to know what you guys that have had it for a while think of it?
Posted on: 5/10/2012 2:29 PM by Author "gdiddy13" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=11076175

RE: question for savage flux owners
perfect thanks buddy!
Posted on: 4/29/2012 7:32 PM by Author "gdiddy13" in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=11061903

RE: question for savage flux owners
I think you answered my question, but just to make sure. The measurement from edge line to edge line, this is where it connects to the chassis. Thanks!
Posted on: 4/29/2012 7:16 PM by Author "gdiddy13" in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=11061877

question for savage flux owners
Hello big brothers. I say this because I'm a Savage xs flux owner. I'm working on a project and could use your help! Can anyone give me the measurements of the A-arms, specifically where they attach to the chassis. I'm looking for the "width" distance from outer edge to outer edge, again where it connects to the chassis. I'm not concerned with the end that connects to the hub. If that doesn't make sense let me know, I'm not sure if I'm describing what I need correctly. Thanks guys! and I may be asking you guys a lot of questions if this project gets off the ground. And I'll provide updates if you're interested.
Posted on: 4/29/2012 12:11 PM by Author "gdiddy13" in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=11061369

RE: Official HPI Savage Flux XS thread...
PROJECT XS! Ok, I don't really have anything, but I'm looking for a project and I thought my XS might be fun. I have seen the upgraded motors, esc's etc. I have upgraded several parts. But what I haven't seen done is something like was done over on Ultimaterc, the Chimera project. So I guess I'm looking for some ideas on what to do, to kinda make this thing a little different. I would like to be able to do a bit more of some crawling, though most would say then why buy the XS? But I'm just throwing out ideas. I really want to give this thing some more ground clearance. Does anyone know if any other Savage parts fit ? Let me know what you think
Posted on: 4/28/2012 12:12 PM by Author "gdiddy13" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11060306

RE: Official HPI Savage Flux XS thread...
Thank you that's exactly what I needed. I'm thinking of using the Traxxas 2056, though. Do you think I would notice a difference with the 2056 as compared to the stock servo? [quote]ORIGINAL: spena [quote]ORIGINAL: gdiddy13 Does anyone know the specs on the steering servo? I know it was mentioned on this thread before but can't find it. Thanks, [/quote] XS servo is the SF 10W while
Posted on: 4/16/2012 6:20 PM by Author "gdiddy13" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11044917

RE: Official HPI Savage Flux XS thread...
Does anyone know the specs on the steering servo? I know it was mentioned on this thread before but can't find it. Thanks,
Posted on: 4/14/2012 10:08 AM by Author "gdiddy13" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11041592

RE: Official HPI Savage Flux XS thread...
Is there a video or anything similar on how to shim the diffs?
Posted on: 3/13/2012 6:52 PM by Author "gdiddy13" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10999115

Gens Ace imars charger problem??
As the title suggest I have a Gens Ace iMars charger. It works fine, if I use my car battery as a power source. But that's the problem. No wall adapter, including the one I bought from hobbypartz (twice) and as their recommendation works. Everytime I use a wall adapter and start the charge, it reads insufficient power supply and shuts off. I'm assuming this is a user error, but it's kinda frustrating. Any help is greatly appreciated. Thanks!
Posted on: 3/9/2012 7:51 PM by Author "gdiddy13" in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=10993658

RE: Official HPI Savage Flux XS thread...
I bought a Robinson Racing pinion gear. Only problem is with the set screw. The one that came with it didn't seem machined correctly? No size allen wrench I have would fit, and I have a lot of them. So I used a spare set screw that came with the XS, but it wouldn't drive down through the gear and lock on to the motor. Has anyone had this problem before? Should I not use Robinson? Or is this just a rare bad pinion and screw??
Posted on: 2/25/2012 6:29 PM by Author "gdiddy13" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10975885

RE: Official HPI Savage Flux XS thread...
anyone using the Yokohoma Geolander tires? and what are your thoughts? I'm looking for something a little better than the stock, to use all around. I have dedicated snow or heavy mud tires, so I just need a good all around tire
Posted on: 2/24/2012 9:03 PM by Author "gdiddy13" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10974718