|
RE: Will this work?
I did more research on this and found the following [link]http://www.horizonhobby.com/pdf/EFLA1025_manual.pdf[/link] Take a look at the Servo Ratings with BEC Enabled
Posted on: 6/27/2012 6:20 PM by Author "ghost_rider"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11134478
RE: Will this work?
I have ALIGN RCE-B6X voltage regulator (with built in voltage display) but it is for 2 cell Lipo and not 3 cells. I have a bunch of 3 cell Lipo at home that I would like to find a place for. Like I said, I will re-visit this project later but something inside me tells me that this will work. Best Regards
Posted on: 6/27/2012 5:58 PM by Author "ghost_rider"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11134455
RE: Will this work?
Thanks Guys for all the input. I will leave this experiment alone now but will come back to it later. I'm still of the opinion that this should work because the ESC would be used as a BEC only. It will not power any motor but just the Rx with 4 standard servos attached.
Posted on: 6/27/2012 4:03 PM by Author "ghost_rider"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11134323
RE: Will this work?
[quote]ORIGINAL: joeflyer What's the BEC rating on those ESC's? Most of the ones I've seen are less than 4A. Most are fine for a foamy or light plane, but I'd be worried that it may not be enough to power your receiver and servos on a medium or larger plane, or especially in a jet with high current servos.  Joe [/quote] [image]http://www.e-fliterc.com/ProdInfo/EFL/250/EFLA1025-250.jpg[/image] Here are stats on it: 25-Amp Pro Brushless ESC Key Features Up to 25-amp continuous current with proper air flow Finned heat sinks for both the motor drive MOSFETs and dual BEC regulators to support up to 4 sub-micro servos Programmable motor braking Safe power-arm mode prevents accidental starts Programmable low-voltage cutoff with settings for 2-cell Li-Po (6V), 3-cell Li-Po (9V) or 70% of battery starting voltage Programmable throttle input range (1.1–1.9 ms or Auto Select) Auto motor shut down if signal is lost or there is interference Programmable timing—2 user-selectable ranges for use with a large variety of brushless motors Pre-wired connectors—E-flite EC3 on battery input and 3.5mm female gold bullets on motor output leads Soft start
Posted on: 6/26/2012 8:53 PM by Author "ghost_rider"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11133311
RE: Will this work?
[quote]ORIGINAL: basimpsn [quote]ORIGINAL: ghost_rider I have few high capacity 3 cells 5000 mAh 25c LiPo batteries and ESC ‘s laying around and I was looking at them today and a thought went through my mind. I asked myself, how about using the extra batteries and ESC in my non-electric airplane. This is what I want to do: 1. Plug the Lipo battery into the ESC as normal 2. Plug the output
Posted on: 6/26/2012 8:50 PM by Author "ghost_rider"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11133305
RE: Will this work?
[quote]ORIGINAL: Ruizmilton what do you want to use the output 5 v for? what will it power? [/quote] Use it as Rx power supply for 4 full size servo's
Posted on: 6/26/2012 8:42 PM by Author "ghost_rider"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11133298
Will this work?
I have few high capacity 3 cells 5000 mAh 25c LiPo batteries and ESC ‘s laying around and I was looking at them today and a thought went through my mind. I asked myself, how about using the extra batteries and ESC in my non-electric airplane. This is what I want to do: 1. Plug the Lipo battery into the ESC as normal 2. Plug the output that goes into the throttle channel of an electric airplane into my on/off switch in my airplane (it produces 5V) 3. Cap off the three wires that goes into an electric motor. So, what do you guys think? Is this doable or not?. I’ve already connected this to a voltmeter and it shows constant output of 5.2V
Posted on: 6/26/2012 6:14 PM by Author "ghost_rider"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11133114
RE: Help Needed.
Thanks Goose.
Posted on: 5/21/2012 7:19 AM by Author "ghost_rider"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11088709
Help Needed.
Anybody have a Multi4 FUIM3 that I can use. They are on back-order and I needed one to re-flash my charger. Any help would be appreciated.
Posted on: 5/20/2012 4:39 PM by Author "ghost_rider"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11088058
Here we go again!!! Model airplane crashed into Fed Building
I'm in Billerica MA. and they just showed a news flash that a model aircraft just crashed into a Federal Building. That's all the details I have now. ABC WCVB 5
Posted on: 12/8/2011 3:41 PM by Author "ghost_rider"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10850343
RE: Here we go again!!! Model airplane crashed into Fed Building
They just confirmed it was an accident. They showed some Fed Boys and dogs that checked everything out and they said it was an model airplane that flew away and no cause for alarm. It took out few solar panels on top of the building but the building will re-open tomorrow as normal. That's all I have for now. Reporting from my hotel room in Billerica MA., ..........ghost_rider.....out.....
Posted on: 12/8/2011 3:40 PM by Author "ghost_rider"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10850444
RE: Here we go again!!! Model airplane crashed into Fed Building
http://www.thebostonchannel.com/news/29955237/detail.html
Posted on: 12/8/2011 3:01 PM by Author "ghost_rider"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10850360
RE: Here we go again!!! Model airplane crashed into Fed Building
It was on ABC WCVB 5. Will post more details as I get it.
Posted on: 12/8/2011 2:59 PM by Author "ghost_rider"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10850357
What do you do
When your football team is called Indianapolis Colts and they suck to high heavens It is Sunday night and you do not want to watch any other team play You want to keep your sanity Then click on following url's (open both links for full effects) [link]http://www.liveatc.net/flisten.php?mount=kord_app&icao=kord[/link] [link]http://flightaware.com/live/airport_status_bigmap.rvt?airport=KORD[/link]
Posted on: 11/8/2011 12:26 PM by Author "ghost_rider"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10799825
RE: Dr. Burt Eisenburg
I just read this sad news and could not believe it. Burt my friend, may YOUR SOUL REST IN PEACE and my condolences to the family.
Posted on: 5/16/2011 12:31 AM by Author "ghost_rider"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10522548
RE: Does anyone know David swantz
What is the proper name for this Person?. Is it David Swantz as used in the post header or David Schwantz as mentioned elsewhere in this thread?
Posted on: 1/4/2011 4:20 PM by Author "ghost_rider"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10239736
RE: Cessna 425 Twin Turbo Prop finished
Great Job RB!!!...and I love the tail number Qw-Qw-One_Qw I have not fully recovered but i will call you this weekend.
Posted on: 11/19/2010 2:55 PM by Author "ghost_rider"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10145745
RE: johnny is this the lost plane from bg?
[quote]ORIGINAL: Skymac No Doubt Buddy, I'm just trying to make a point of the OP and following ghost account created is childish, I'm not defending anyone or pointing any blame fingers... [/quote] When you said "ghost account" are you talking about post from user "pocketchange" ?. I noticed he created an account yesterday with only one post.
Posted on: 11/12/2010 11:36 AM by Author "ghost_rider"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10131053
RE: johnny is this the lost plane from bg?
;Ghost_Rider" and I approve this message.
Posted on: 11/12/2010 10:48 AM by Author "ghost_rider"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10130966
RE: Winamac Fall Fling 2010
Tim That is the same weekend as RB's (Wren USA) open house. What's up with that?
Posted on: 10/2/2010 8:12 PM by Author "ghost_rider"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10043271
RE: THE MODERATORS ARE AWARE OF THE SITUATION RE NIGHTWALKER
[quote]ORIGINAL: YellowAircraft Ghost, Are you his HOMEBOY?? [/quote] Negative. I do not like JC using the "HOME[color=#990000]BOY[/color]" thingy but I will just ignore it and give him benefit of the doubt. I DO NOT THINK HE MEANT ANY HARM. Take care my friend. Best regards Ben
Posted on: 9/19/2010 4:38 AM by Author "ghost_rider"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10012132
RE: THE MODERATORS ARE AWARE OF THE SITUATION RE NIGHTWALKER
would not have existed. [quote]ORIGINAL: ghost_rider [quote]ORIGINAL: RCKen However, if the thread
Posted on: 9/18/2010 5:18 AM by Author "ghost_rider"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10010280
RE: THE MODERATORS ARE AWARE OF THE SITUATION RE NIGHTWALKER
[quote]ORIGINAL: RCKen However, if the thread does turn into a wichhunt . Ken [/quote] RCKen I think post #29 falls into that category. Check the moderators forum FYI. Best Regards and I'm glad I'm not in you guys shoes anymore. Keep up the good work!!. Ben
Posted on: 9/17/2010 9:29 PM by Author "ghost_rider"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10009729
RE: THE MODERATORS ARE AWARE OF THE SITUATION RE NIGHTWALKER
[quote]ORIGINAL: David Searles I can think of several members who quite frequently make comments that slip into the ''insult'' category and have yet to be disciplined. I think ''the free flow of ideas'' would definitely encompass Bryce's comments. David S [/quote] David I agree with you especially when those that Bryce has been at loggerheads with in the past will post comments here knowing fully well he was on moderation status and could not post here to defend himself. I've tried to stay away from Jet forum controversy but a torrent of indignation boils through my veins when I see such idiosyncrasy. Let bygones be bygones and move on. [youtube]http://www.youtube.com/watch?v=4W1Qpw8rSnE&feature=youtube_gdata[/youtube]
Posted on: 9/16/2010 11:32 PM by Author "ghost_rider"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10007925
RE: THE MODERATORS ARE AWARE OF THE SITUATION RE NIGHTWALKER
[quote]ORIGINAL: -JC- If you can't act as a grown up, then the moderators take action... I think that is fair enough. [/quote] Hmmmmmmmmmmm!!!!!!!!!!!!!!!!......................." A Daniel has come to judgment"
Posted on: 9/16/2010 10:25 PM by Author "ghost_rider"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10007789
RE: THE MODERATORS ARE AWARE OF THE SITUATION RE NIGHTWALKER
Hmmmmmmmm!!!!!!!!!!!....did I miss anything?. If anybody knows, a PM would be very much appreciated.
Posted on: 9/15/2010 9:49 PM by Author "ghost_rider"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10005318
RE: Jets Over the Heartland June 20-27, 2010
Any news from MAC?
Posted on: 6/22/2010 6:54 PM by Author "ghost_rider"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9820336
RE: THE MAC
The "Ghost" will be there
Posted on: 6/2/2010 9:03 PM by Author "ghost_rider"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9776992
RE: Jets Over the Heartland June 20-27, 2010
The Ghost will be there!!!
Posted on: 6/2/2010 8:52 PM by Author "ghost_rider"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9776965
The "Ghost" is back!!!!!!
Glad to be back after spending 29 days at the motherland for the funeral of my dearly departed 100 yrs old mother. May her soul rest in God’s perfect peace. FWIW, I’m an orphan now (lol)
Posted on: 5/26/2010 10:19 AM by Author "ghost_rider"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9760313
| 
