graphics
Does anybody have a favorite site for stick on graphics? Thanks Gary
Posted on: 1/24/2011 7:51 PM by Author "gmeister" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10286139

RE: Windy City Jets (Pilots Gift Bag)
There was about 30 pilots there which I think was great. Never a jam up on the runway. I flew whenever I wanted. No waiting. Nice weather, nice gifts and the dinner Saturday night was very good. Pizza and fried chicken. Also lots of beer was consumed. I didn't take any pictures so I hope someone else did. Great event Dave and Eric. Gary
Posted on: 8/24/2009 8:50 AM by Author "gmeister" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9040003

Hen Tech RC Mustang HTE00646
Any links for parts for this off brand 4-wheel drive truck? I didn't find anything on Ebay. gary
Posted on: 7/22/2009 4:19 PM by Author "gmeister" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=8955241

RE: VELOX.. Build thread with Photo's..
Yes that is my Velox. Look real cool doesn't it! Gary
Posted on: 9/9/2008 8:10 AM by Author "gmeister" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7935913

RE: VELOX.. Build thread with Photo's..
No problem with mine. I just flew the snot outta mine this weekend at Route 66 jets. The only problem was my stained shorts and high blood pressure. With a P70 this thing is a missile and is fast enough for me. It also slowed down very nicely.
Posted on: 9/8/2008 3:25 PM by Author "gmeister" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7933345

gear door sequencer
Which gear door sequencer are people using? I have the Ve-Lox and an looking to buy one. Any suggestions? How do they work?
Posted on: 8/13/2008 6:43 PM by Author "gmeister" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7842646

RE: Velox Pilots
Can someone clear up the CG. Isn't the CG on the wing tube? I assume the antirotation pin the the pin toward the LE.
Posted on: 7/20/2008 11:14 PM by Author "gmeister" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7753434

RE: Velox Pilots
I just started building my Ve Lox. What do I need to look for and be careful about. I don't like how they do the flaps. Had they moved one of the flap horns to the other side of the flap I would not need a servo reverser. Other than that the kit is good so far.
Posted on: 7/20/2008 11:11 PM by Author "gmeister" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7753414

RE: the "F"word
This thread sounds like a bunch of old ladies with nothing better to do than guess why someone is wearing a Futaba shirt.
Posted on: 6/11/2007 12:11 PM by Author "gmeister" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=5972874

RE: Please justify ??
I can understand comparing the wife and jets. What ever gets me out of the house and away is worth the money.
Posted on: 4/19/2007 12:58 PM by Author "gmeister" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=5739831

RE: Kerosene $3 a gallon at Home Depot
We do? Here is the Chicago area it is $3.29.
Posted on: 3/21/2007 1:26 PM by Author "gmeister" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=5595508

A380
The A380 just landed in Chicago.
Posted on: 3/20/2007 2:21 PM by Author "gmeister" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=5590404

need a kit or plan
I have a Norvel .61 looking for an airplane. I like the Mach None made by Ace but they don't make it anymore. Where can I get a kit or plans for an airplane like the Mach None. It looked like a pattern airplane. Gary
Posted on: 11/12/2006 6:50 PM by Author "gmeister" in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=4987529

RE: Spiderman Jet Meet is BACK!!!
THAT is disgusting.
Posted on: 9/17/2006 9:20 PM by Author "gmeister" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=4760496

RE: Nitro models pusher Bobcat?
I flew the snot out of mine this weekend. For $119 this is a great flying airplane. I had it ready to fly in a week. I have a O.S 46 heli which is good power but this airplane could use a 50. I do not like the placment of the landing gear because rotation is a trick. It just jumps into the air and you and it better be ready to fly. It needs to run down the runway until it is up to speed. It lands like a real jet. It needs power until it is over the runway. Then pull the power and let it settle. I didn't put any rudder servos in and just taped the surfaces. Seems to be ok except snaps are not real good. Did anybody else not use the rudders? Gary
Posted on: 8/27/2006 8:52 PM by Author "gmeister" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=4677569

RE: new Arf Boomerang 14lb thrust
I flew the BB today and what a great flying airplane. I still need to work on slowing it down on the landing but I am happy and am having a celebratory drink. Gary
Posted on: 8/8/2006 10:06 PM by Author "gmeister" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=4599840

RE: new Arf Boomerang 14lb thrust
frothingslosh, I put the P70 in mine and did the same thing you did. I have not flown mine yet but just make sure the turbine clears the formers and I also used the BVM heat shield on the inside of the fuse. I also turned around the mount so it would fit. There are pictures in this thread from someone else who also used the P70. Take a look and good luck. I hope to fly mine tomorrow. Gary
Posted on: 8/7/2006 11:05 PM by Author "gmeister" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=4595914

RE: new Arf Boomerang 14lb thrust
Started building my BB today. This is a great kit. It shows you dont have to give Bob $4000 to get a good kit and good flying airplane. Is everyone using the supplied hinges without any problem. What servos? I am planning on using Futaba 3050s which are 92 OZ on 6V. Has anyone put a P70 in the BB. Looks like a tight fit. Gary
Posted on: 8/2/2006 6:35 PM by Author "gmeister" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=4576346

RE: How much runway to launch P80 powered Roo
If this is any reference, I flew a P70 powered Roo from pavment near sea level and used about 500 feet. I don't know how 3500 feet will affect a turbine but you should be ok. Gary
Posted on: 7/29/2006 11:29 PM by Author "gmeister" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=4560699

RE: Winamac Jets Over The Heartland 2006!
I am bringing my TGA F15 DF airplane so I will join in on the pylon race. It will give me a chance to fly it again. Gary
Posted on: 6/20/2006 8:47 AM by Author "gmeister" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=4409586

fire extinguisher
Does anybody have a suggestion for a low cost one time use Halon extinguisher? Web site. Gary
Posted on: 4/20/2006 10:11 PM by Author "gmeister" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=4190672

RE: Royalties for models
A hat? I didn't get a hat. I think the P&W emblem on the side of my turbine would look cool! Gary
Posted on: 4/17/2006 1:04 PM by Author "gmeister" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=4176054

norvell 061 muffler
My Norvell 061 muffler fell apart and I lost the tail pipe. Does anybody have parts? Gary
Posted on: 3/5/2006 8:37 PM by Author "gmeister" in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=3996012

RE: Horizon Hobby Yak 54F, anyone fly yet?
Flew mine last night indoors.I got mid-aired in a hover on the first pack.Minimal damage.TP 900 was good for 15 minutes of mixed hovering and slow flight.I was not happy with the knife edge coupling.It hovered very well.It lands really nice for a foamy.
Posted on: 1/21/2006 1:11 PM by Author "gmeister" in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=3805140

RE: Horizon Hobby Yak 54F, anyone fly yet?
I got 3 tp 900s.My all up weight with batt came in at 11.52oz on a comercial computer ink mixing scale.Can anyone advise me of a good CG measure?I'm going to the dome tonight.I want to hover,fly slow knife edge,and harriers without getting snappy on slow flight and landings.....I will post results after the weekend.
Posted on: 1/20/2006 1:57 PM by Author "gmeister" in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=3801067

RE: Horizon Hobby Yak 54F, anyone fly yet?
Ok-my set up.10X3.8 /Phoenix 10/1080kv 370 outrunner/Superlight build.My question is what 3cell battery to get for a light setup with power to hover and won't cut out my esc.I have flown other 370s with 20 amp esc and 1320s,and the power and vertical pull out of hover is exceptional as far as I am concerned.I just want the slow flying ability for the down on the deck aerobatics that only a light package can provide.I am willing to give up a little power.
Posted on: 1/15/2006 6:14 PM by Author "gmeister" in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=3778648

RE: DV8R Sortie - 5 Cameras
That was awesome. The only thing that sucks is you are flying in Flordia and I am freezing my arse off here in Chicago. Gary
Posted on: 1/5/2006 10:59 PM by Author "gmeister" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=3737775

RE: Rossi 90 Df for TGA F15
Wow that is brutal.[:D] I guess that is why I have never owned one.
Posted on: 10/26/2005 1:02 PM by Author "gmeister" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=3491982

Cermark Viperjet
Does anyone have any info on the Cermark Viperjet. Most important is how does it land? I would be flying it with a P70 so it would be on the light side. Any input would appreciated. Gary
Posted on: 10/18/2005 12:51 PM by Author "gmeister" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=3466807

P70 in Roo mount
Does anybody have any suggestions for fitting a P70 in the Kangaroo mount. I am thinking cut and reform. Jet cat does not have a mount for the P70. Gary
Posted on: 9/2/2005 12:44 PM by Author "gmeister" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=3323185