RE: Matrix Machine Tool Modoification
i have used his services a few times already usually he is only available through email my contact with him is matrixmt@earthlink.net telephone is 5856631773 but don't know if that is accurate
Posted on: 9/12/2012 7:37 PM by Author "gtoro26" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11226790

RE: Is this FOD bad?
iis that the new toe and naill clipper 3000
Posted on: 8/27/2012 3:45 PM by Author "gtoro26" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11208184

RE: What do you think about JETLEGEND L39?
emoshalagabaiiiiiiii
Posted on: 8/27/2012 3:42 PM by Author "gtoro26" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11208177

RE: Is this FOD bad?
it is normal to have machined like markings on your blades on shaft directly behind starter motor these are placed in specific areas to complete balancing process
Posted on: 8/27/2012 3:35 PM by Author "gtoro26" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11208169

RE: Is this FOD bad?
yes i also agree i have a few friends who's home field is asphalt and due to going to a couple local shows nearby on grass or manicured grass same issues did arise. kerry did specify that there is no way even with a fod screen to avoid this the grains of sand are so thin that entry thru screen to engine is almost inevitable good luck be safe
Posted on: 8/26/2012 9:31 PM by Author "gtoro26" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11207166

RE: Is this FOD bad?
i thought mine was fine after blowing out entire aircraft with compressor it was about 2 flights after grass runnoff and the grinding started both bearings needed immediate attention kerry at j central PA said it was the finest dirt he had ever seen affecting the bearings i am i guess anal and i sent it in after i heard the grinding yes i could of flown more and caused more damage or even a seisure but its better to have it checked out for small fee or get in to trouble and get a higher bill to fix just some advice
Posted on: 8/26/2012 8:17 PM by Author "gtoro26" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11207110

RE: Is this FOD bad?
just a little info i have had all j central engines and have never run them without screen i had 2 run offs into grassy areas at end of asphalt runway f16 with rhino 1st time nose gear did not collapse and didnt think much of it 2nd time nose did collapse in grass and i did immediate shut down long story short the finest granules of dirt did end up causing bearings to start grinding on next few flights immediately had a 3 day turnaround with kerry at jet central usa in PA he is very efficient pay close attention to the engine spool up and spool down and listen carefully if there is a difference grindage >> thnks
Posted on: 8/26/2012 6:44 PM by Author "gtoro26" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11207027

RE: BAE Hawk vs F-16 (fun poll)
i have had the pleasure of flying the hawk in a few scale sizes and stretched all their legs very precise model but my f 16 ooooohhhhhh there is really nothing sexier than a nice 10 mph head wind and turning inbound into a 60 degree alpha across the entire length of the field then again i still want a sm hawk 100 anybody got one haahha
Posted on: 8/14/2012 8:40 PM by Author "gtoro26" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11193907

RE: powerplant question
thanks for the response mammoth it is
Posted on: 8/8/2012 10:16 PM by Author "gtoro26" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11186514

RE: powerplant question
first hand knowledge would be great
Posted on: 8/8/2012 9:08 PM by Author "gtoro26" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11186452

RE: powerplant question
first hand knowledge would be great
Posted on: 8/8/2012 9:06 PM by Author "gtoro26" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11186449

powerplant question
trying to decide mammoth or rhino ks on brand new ultra lightning i ve been flying buddys ultra bandit with mammoth and love it i know ultra lightining will be significantly lighter but the gap is big between powerplants also i already have a rhino ks in an f 16 and love that but i kinda dont want 2 rhinos so what would you do??????????? thanks
Posted on: 8/8/2012 9:03 PM by Author "gtoro26" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11186444

RE: ultra llightning door cylinder package
tthanks for the info i will check for the cylinders but the misc pieces i do believe came with the bag of goodies i will need to look thoroughly my buiilder is comencing the project thanks again i will send pm if needed
Posted on: 7/19/2012 7:44 PM by Author "gtoro26" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11161916

ultra llightning door cylinder package
help with purchasing of the correct size cylinder set for comp arf's ultra lighnting i need main door cylnder and setup package also doing a single door system for nose gear setup any suggestions please do help thanks
Posted on: 7/19/2012 6:04 PM by Author "gtoro26" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11161802

RE: Looking to buy p180 or mamouth
my buddy wants to sell his p200 propane start i am suggesting him to put in on rc u for about 3150 obo call me if interested 3056076535
Posted on: 7/14/2012 8:46 PM by Author "gtoro26" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11155625

RE: FEJ F-14 servo rudder torq question
if you dont have direct link to good prices i have always done futaba and hitec through servo city check it out if you havnt already chears
Posted on: 6/28/2012 8:52 PM by Author "gtoro26" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11135954

RE: FEJ F-14 servo rudder torq question
absolutely will be ok i know you have been talking to my buddy mave311 dont know what he uses but ask him about the mods he had to do for access while pipe is installed its not fun when you have to remove half one side of the aircraft to service rudder or tighten anything
Posted on: 6/28/2012 7:27 PM by Author "gtoro26" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11135856

RE: JetCentral service
with customer service requiring consistency as the standard eric has mastered in my eyes this concept i have had from rabbit to cheetah to rhino and soon a mammoth every turbine can have issues and all manufactureres as well but it is the assessment and quick response from a knowledgeble individual like eric that keeps me praising j central as a local spokesperson for j central at my field i have turned my friends to the brand and they cant be more than happier +1 to a good friend of mine eric c papa
Posted on: 6/19/2012 10:35 PM by Author "gtoro26" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11124723

RE: Gotta love the Chinese Copy Factories....
NOT YELLING JUST A CLARIFICATION I SEE HOW DOWN THE LINE THINGS GET DISTORTED ON THREADS I DONT MEAN TO OFFEND ANYONE JUST TOLD MY STORY AND AGAIN I THANK MARK FOR THE IDEA CREDIT TO MCLAREN AND THEIR PAINTERS
Posted on: 4/8/2012 9:04 PM by Author "gtoro26" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11033895

RE: Gotta love the Chinese Copy Factories....
just to clarify my name is gabe from miami about a year ago i was looking around at paint schemes for my viper and i fell in love with marks paint scheme featured on skymasters website unfortunately i couldn't do the large one and i knew that fly eagle could do custom work as long as the pictures were sufficient i was able to contact mark through rc u and he sent me more than 25 pics of this paint scheme incredible job i was able to forward over to f e j what mark had sent me but i just wanted the background no text at all thats what i received no text at all. i had my custom decal talent do the exact decal match to marks viper and it was a match i also had custom airbrush and black detail done to match marks plane perfectly here is a link of my fly eagle jet s version http://www.youtube.com/watch?v=Zagch-8YDAo this is final product of my custom worked viper thanks to the original mark schroeder my viper won best civilian aircraft at florida jets and best sport jet at gathering of the giants now to the picture that was on the post a buddy of mine asked me for the same file because he wanted to do the same paint scheme cause he loved mine i sent him the file that mark sent me and that was forwarded to fej he did infact ask for the text so f e j copied i guess as much as they could unfortunately my buddy did not ask me what was " schroeder" until we unwrapped bobbys new viper we realized that they infact copied and decaled marks name under canopy NOW WHEN I TOLD HIM WHAT SCHROEDER WAS WE BOTH LAUGHED OUR ASSSSSSEEEESSSSS OFF BY THE WAY HIS VIPER FLEW GREAT BUT I WOULD NOT BLAME THE MANUFACTURER ON THIS ONE IT WAS NOT CLEAR ON MY PART WHAT ALL THE DECALS WERE SORRY IF THIS OFFENDED ANYONE BUT I BELIEVE I AM AT FAULT FOR THE NAME ISSUE BY THE WAY MARK I JUST SOLD THE AWARD WINNER TO MAKE ROOM FOR AN ULTRA SOMETHING THANKS FOR YOUR HELP IN MY JOURNEY
Posted on: 4/8/2012 7:57 PM by Author "gtoro26" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11033819

RE: First Turbine.
this jet is an absolute masterpiece nice role lands slow knife edges like a champ and best of all power it with a j c rhino ks you will not be let down
Posted on: 4/4/2012 5:05 AM by Author "gtoro26" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11027745

RE: What Sport Jet / easy scale jet for K170F Kingtech
big viper is a cruiser and flies very well lands light and easy big hawk very scale excellent choice lands easy c arf ultra lightning im waiting for mine with rhino power should do 200+++ 1/6 jl f16 i have it rhino power sweeeeeeet all around the 5k mark you asked for f16 around 3500 with armament good luck
Posted on: 3/27/2012 8:10 AM by Author "gtoro26" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11016982

ev6 u st pro airpower
has anyone seen or experienced this two flights today all was good then......... fueled turned radio on then turned my switches on 1 second and front gear collapsed mains stayed down didnt even touch any switches thennnnnnn turned all off then on again gear works fine but heard like a buzzing sound coming from the brake port of the valve thought it was a leak but after trouble shooting all lines it seems like it is caught between the on and off position and maybe valve is half open and won't close or fully open does this sound familiar to any of you guys thanks for the time ??????????
Posted on: 2/21/2012 12:18 AM by Author "gtoro26" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10968653

RE: Lipo in a 12fga
i use a 2600 7.4 lipo in my 12 fg the standard included nicad is the most horrible battery almost lost my prized jet due to voltage drop i believe it is the power edge battery the only problem it doesnot fit in the appropriate hooks that the nicad is deisgned for. the lid does not close properly so just connect the wire tuck them in nicely and use the best adhesive tape to secure the lid you dont want the battery falling out gd luck
Posted on: 2/19/2012 6:10 PM by Author "gtoro26" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10966663

RE: Futaba 12FG question
ttry doing mix instead thats how i have it on my viper i have two position flaps with up elevator mix on both
Posted on: 2/16/2012 3:10 PM by Author "gtoro26" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10962127

RE: Futaba Aerial Securing Method??
question here? i do futaba also and heard that it should stay away from any carbon fiber plating such as tray or type of reinforcement any truth or examples to this my futaba rx hs is going in a new location after this question? thanks
Posted on: 1/27/2012 5:23 AM by Author "gtoro26" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10930274

RE: FEJ Viper S
this jet is definitely a great intro jet with a wide range of acrobatic ability this version is a little bit heavier than s m version of their 2m i am the proud owner of this fine machine i am still working on cg as i have to move 1 or 2 batteries back just a bit more than it should be dialed in thanks for the kind words also fly eagle version is very access friendly with a large workable area 31 lbs turbine is the way to go for viper s marvin has helped out a great deal with the finishing hope to get it up soon and more videos to come it is getting a little more detail work to cockpit by marco blum painter again thanks for watching
Posted on: 1/19/2012 7:49 PM by Author "gtoro26" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10917909

RE: Skymaster F16 with P180?
ii have a local friend who has the skymaster 16 and flies with classic 180 it is way too overpowered he does fly it hard though he also flies it with some armament and it does move rhino will be nice and scale ks
Posted on: 1/18/2012 9:56 PM by Author "gtoro26" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10916427

RE: UAT question
the only issue is if somehow your u a t drains before main tank due to air leak or other issue of the kind and affects c g it might cause a problem but other than that you should be o k
Posted on: 1/1/2012 10:41 PM by Author "gtoro26" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10887189

RE: Viper Jet 2M up next! Skymaster or Fly eagle??
i have flown this jet with a rabbit and a k80 i definitely think it needs a little more to do full acro
Posted on: 12/29/2011 12:38 AM by Author "gtoro26" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10880776