|
RE: Tomahawk-Design Bae Hawk 1: 3.5
Can someone measure the Hawk 66 for me? I need wide, long and high measures from the Hawk 66 assembled and ready to fly... regards Heraldo
Posted on: 5/15/2013 10:01 PM by Author "heraldoboldrin"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11512842
RE: 4th gen A-10 by Mibo jets
Anybody has the phone number from Dan at detailscale? my canopy sequencer didn't work and i can't contact him....
Posted on: 7/18/2012 2:47 PM by Author "heraldoboldrin"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11160313
RE: 4th gen A-10 by Mibo jets
how much cost the fans?
Posted on: 7/18/2012 2:46 PM by Author "heraldoboldrin"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11160309
RE: Tomahawk-Design Bae Hawk 1: 3.5
What is this upgrade on spring guys?
Posted on: 7/3/2012 4:43 AM by Author "heraldoboldrin"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11140993
RE: 4th gen A-10 by Mibo jets
I use 1 jettronics, with 100 psi with no problem.... close the line of one gear each time.. i think you are havig a problem somewhere....
Posted on: 6/20/2012 8:50 AM by Author "heraldoboldrin"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11125178
RE: Please help with 18MZ tx stick issue
Krysta My 18mz arrived, it is possible to adjust the tension of the side slides.. mine is to hard compared with the 14mz Regards Heraldo
Posted on: 5/28/2012 7:12 PM by Author "heraldoboldrin"
in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=11097976
RE: Tomahawk-Design Bae Hawk 1: 3.5
i will start my hawk.. and i am buying some acessories from detail scale.. as i didn't check all parts that i receive...Tomahawk hawk.. comes with ? (otherwise i will order in detailscale) - Static Arrestor Parts - Super Scale Fuselage Gauges - Operating Canopy Mechanisms Other question.. the real hawk has manual or automatic open canopy?
Posted on: 5/28/2012 5:08 PM by Author "heraldoboldrin"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11097856
RE: 4th gen A-10 by Mibo jets
Guys.. last weekend i have one turbine failure after full flap and open langing gear.. a few minutes before landing.. Ofcourse when i noticed that i was scared.. but one p160 can carry the A10 with full flap, all weapons.. with 100% of power... the landing was perfect.. I didn't do that, but as the jet is very slow and with 100% in one side.. you will need some rudder .. is not big deal.. I recommended if someone have a turbine failure don't use full flap just half.. i didn't try.. but i think will be better.. The worst part is the seconds that you are with one turbine and didn't know.. i always go with half power with full flaps and gear down.. with that power the jet fly very well.. and after do that, i noticed the jet almost stoped in the air.. them i supose that i lose one engine and go full power..but i could have a stall and crash it... this is the difficult. Heraldo
Posted on: 5/23/2012 9:30 PM by Author "heraldoboldrin"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11092559
RE: 4th gen A-10 by Mibo jets
I am puting the acessories on A10, in the circle red i found where to glue, and the others? anybody can help? heraldo
Posted on: 5/21/2012 9:16 PM by Author "heraldoboldrin"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11089844
RE: 4th gen A-10 by Mibo jets
I put another 2 videos.. flying at a big airshow show here in brasil. Our most important fly squadron team from our air force did 60 years. 2 f18 from US Navy and 2 F18 from Canada came here. http://www.youtube.com/watch?v=8LcpJxd52jk&list=UUqhRhcycX67EtT8nH7IF5Gw&index=1&feature=plcp http://www.youtube.com/watch?v=UHVvYIgo3oQ&list=UUqhRhcycX67EtT8nH7IF5Gw&index=2&feature=plcp regards Heraldo
Posted on: 5/16/2012 7:25 PM by Author "heraldoboldrin"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11083804
RE: 4th gen A-10 by Mibo jets
Stan Why are you selling the A10? (just curious) Heraldo
Posted on: 5/11/2012 1:45 PM by Author "heraldoboldrin"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11077230
RE: s/m 1/6 f16 in my hot little hands!
Anton What changes in G2? Heraldo
Posted on: 5/7/2012 9:16 PM by Author "heraldoboldrin"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11072511
RE: 4th gen A-10 by Mibo jets
Mark My A10 has more or less 61 pounds dry. I will try to check ir again to confirm that. I am using the olg gear in the nose and the new behotec in the back. I have to change the springs for a hard one in the back ((the standart dont handle the weight of the jet dry) The gears is ok, just when i open it the nose usually need a few seconds to open.. but open everytime (until now). Maybe because i am using an air regulator.. Heraldo
Posted on: 5/1/2012 3:11 PM by Author "heraldoboldrin"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11064466
RE: 4th gen A-10 by Mibo jets
Videos from A10 http://www.youtube.com/watch?v=tnIAY2sR-U8 http://www.youtube.com/watch?v=SygKDEpk_6c Heraldo
Posted on: 5/1/2012 3:05 PM by Author "heraldoboldrin"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11064454
RE: 4th gen A-10 by Mibo jets
More pictures
Posted on: 5/1/2012 4:19 AM by Author "heraldoboldrin"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11063742
RE: 4th gen A-10 by Mibo jets
Mibo A10.. first day flights.. Amazing jet with 2 - 160sx, 9 liter of fuel, JR8711 and 8611 servos, powerbox royal, Futaba 14mz. Heraldo
Posted on: 5/1/2012 4:14 AM by Author "heraldoboldrin"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11063556
RE: Remove 18MZ throttle stick limits
Bax I read something as software update for 18mz, because of some small bugs on aircraft name or something.. When will it happen? Heralo
Posted on: 4/24/2012 10:05 PM by Author "heraldoboldrin"
in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=11055701
RE: 4th gen A-10 by Mibo jets
Guys... I am having problem with the springs on rear landing gear.. just with the fuel empty the springs can't handle the weight.. i open the leg of the langing gear.. and i found 2 spings .. i will try to change to a stronger one.. what do you do in your jets? do you think will work my idea? regards Heraldo
Posted on: 4/16/2012 11:44 AM by Author "heraldoboldrin"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11044379
RE: 4th gen A-10 by Mibo jets
Almost read for the first fly.. (my builder and the jet inthe picture) Heraldo
Posted on: 4/14/2012 3:04 PM by Author "heraldoboldrin"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11041881
RE: 4th gen A-10 by Mibo jets
Thanks Stan I already send an email to Dan.. anybody here is using detaiscale canopy sequencer..? (i check the manual at detail scale website.. but i think is to confuse..) regards Heraldo
Posted on: 4/10/2012 7:15 PM by Author "heraldoboldrin"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11036956
RE: 4th gen A-10 by Mibo jets
My A10 kit some with this wood.. but i have no idea if this is part of the kit? someone can help me? (it is more or less 50 inches long)
Posted on: 4/10/2012 3:30 AM by Author "heraldoboldrin"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11035663
RE: 4th gen A-10 by Mibo jets
Stan I am having difficult with the setup of detail scale canopy sequencer.. can you send help? where you conect each servo and RX? (i know that you use cilnders. mine will be with 4 servos..) And you can send me pictures from the sidewinders on your A10.. i think the guy that are constructing my jet did some mistake.... regards Heraldo
Posted on: 4/10/2012 3:22 AM by Author "heraldoboldrin"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11035658
RE: 4th gen A-10 by Mibo jets
Stan.. do you install you detailscale light sytem away from other eletronic devices? heraldo
Posted on: 4/8/2012 7:42 PM by Author "heraldoboldrin"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11033795
RE: 4th gen A-10 by Mibo jets
guy. i need some help with lights.. what has to be fixed and what lights has to flashing? regards Heraldo
Posted on: 4/8/2012 6:57 PM by Author "heraldoboldrin"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11033734
RE: 4th gen A-10 by Mibo jets
Dave How long you can fly with 300oz with twin 120? i am asking because mine is with 300oz and twin 160.. but i think is to much fuel. regrads heraldo
Posted on: 4/3/2012 3:32 PM by Author "heraldoboldrin"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11027114
RE: 4th gen A-10 by Mibo jets
Stan If you have to use so much elevator need to be trimmed up do you think you can use the CG back a litle? or maybe the 165mm has to be measure from the leading edge of the wing root and not from the extended part. regards
Posted on: 4/2/2012 8:01 PM by Author "heraldoboldrin"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11025979
RE: 4th gen A-10 by Mibo jets
Guys I am finishing my A10.. what CG position are you flying? regards Heraldo
Posted on: 4/2/2012 8:11 AM by Author "heraldoboldrin"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11024978
RE: 4th gen A-10 by Mibo jets
The only Jets that have perfect instructions are BVM and i agree with you... we pay a lot for some of the best jets like Mibo and Tomahawk and dont have instructions..
Posted on: 3/20/2012 10:01 PM by Author "heraldoboldrin"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11009132
RE: Tomahawk-Design Bae Hawk 1: 3.5
Scott Now i undestand what you are saying, propably the idea will be change the spings to a hard one.. regards Heraldo
Posted on: 3/7/2012 12:28 PM by Author "heraldoboldrin"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10990313
RE: Tomahawk-Design Bae Hawk 1: 3.5
scott can you send some pictures of the problem.. i am staring mine..so i can try to fix it in the construction regards Heraldo
Posted on: 3/7/2012 10:35 AM by Author "heraldoboldrin"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10990151
| 
