|
RE: DESOUTTER mk1
door skins are amazing & best is they are cheap.... i have been using them since 1999... happy with it i mainly built small planes 40-60 size so need to make hollow cuts to make it lighter... [:D] all 40 size trainers i have built in the past have the same door skin fuselage & wings are either built up or foam...
Posted on: 5/24/2013 11:57 AM by Author "highfly3D"
in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=11521643
RE: DESOUTTER mk1
what type n thickness of ply are you using for the fuselage sides?
Posted on: 5/23/2013 10:42 AM by Author "highfly3D"
in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=11520338
RE: Foam wing help
Sorry, i am not in NY my brother is in NY. I am very far from that. But yes now i have finally decided i will build the wings in 2 separate core as i mentioned earlier & then join them together as the aerofoil is thin at the tip. I am good at cutting cores so this will not be a problem, the only thing was i am building this type of wing for the first time. Thanks for all your help will keep you updated on this.
Posted on: 9/10/2012 7:34 AM by Author "highfly3D"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11223644
RE: Foam wing help
The other option for me is rather than cutting two separate wing cores, i will cut the wing in one piece & later after sheeting i will cut the slot as shown in the drawing rather than using two separate aerofoils and later gluing them together.
Posted on: 9/9/2012 10:58 PM by Author "highfly3D"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11223380
RE: My First Pattern Video
You did a great job... self designed biplane.. liked the video.
Posted on: 9/9/2012 10:31 PM by Author "highfly3D"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11223367
Foam wing help
Hi all, I am working on my new design of pattern plane, this time the wings are bit different i have attached the picture. I am planning to go with a foam wing, but the problem is the wing has a thin tip. Can anyone suggest me how should i cut the cores i mean should i built each wing in 2 parts with different aerofoil & then join it together or what would be better. Thanks in advance, Harry
Posted on: 9/9/2012 11:52 AM by Author "highfly3D"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11222859
RE: What's the story with JR 2.4ghz?
they are working on a secret 2.4 Ghz technology....
Posted on: 9/9/2012 4:47 AM by Author "highfly3D"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11222548
RE: OS 33GT Gasoline Engine for Pattern
Can you tell us how will this engine perform in the Masters sequence. How well can this engine fly those difficult maneuvers.
Posted on: 9/9/2012 3:35 AM by Author "highfly3D"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11222511
RE: 2102 FAI/F3A EUROPEAN CHAMPIONSHIP
Many thanks JP for sharing this video.
Posted on: 9/2/2012 2:35 AM by Author "highfly3D"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11214202
RE: 2013 & 2014 Advanced and Masters Sequences
no rolling circles in masters ..
Posted on: 8/23/2012 10:10 PM by Author "highfly3D"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11204150
RE: 2013 & 2014 Advanced and Masters Sequences
checked the site the sequence looks good similar to p 13 http://nsrca.us/index.php/sequencecommittee
Posted on: 8/22/2012 12:27 AM by Author "highfly3D"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11201764
RE: 2102 FAI/F3A EUROPEAN CHAMPIONSHIP
Yes i have seen this video & was very helpful to understand the design & flying F3A from the worlds best pilot CPLR himself.. but its really sad that we dont have the complete coverage of this event like any other event TOC, TAS... But i would like to thank Donatas for taking time for making this video.
Posted on: 8/14/2012 11:41 PM by Author "highfly3D"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11194016
RE: F3A Results - SPOILER
I don't know how many people are working on F3A designs using wind tunnel & other experiments & then come up with a design. I am not saying about anyone here, but i never heard people do intense research on F3A. I know there are many who are very interested in doing this.
Posted on: 8/7/2012 1:14 AM by Author "highfly3D"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11183887
RE: F3A Results - SPOILER
Rather than just guessing about the altitude & thin air condition in South Africa i think pilots in SA would be the best to comment on this & any ways i think the pilots skill be the last key to success.... regardless electric or YS power... If you ask me I put my money on YS...[:D] no matter what the altitude..
Posted on: 8/6/2012 5:12 AM by Author "highfly3D"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11182632
RE: 2102 FAI/F3A EUROPEAN CHAMPIONSHIP
i am also looking for the videos of F-13, P-13 & Unknown videos flown by CPLR... please share the link if anyone has it.. I am sure many of them serious F3A pilots want to see the videos..[:D]
Posted on: 8/5/2012 11:47 PM by Author "highfly3D"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11182499
RE: European Champ's - The BIG story
very good, i am also looking for the videos of F-13, P-13 & Unknown videos flown by CPLR... please share the link if anyone has it..
Posted on: 8/5/2012 11:44 PM by Author "highfly3D"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11182497
RE: trimming question
I think its a CG issue, but still check the below links to setup a pattern plane. http://www.mat.uc.pt/~pedro/ncientificos/artigos/trimming.txt http://www.horizonhobby.com/article/1194-setting-up-a-pattern-plane
Posted on: 8/5/2012 3:34 AM by Author "highfly3D"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11181410
RE: European Championship 2012 are you in...
I have great respect for CPLR.... but i was expecting someone new... but he has proved that he still dominates F3A. I have no words...
Posted on: 8/5/2012 2:54 AM by Author "highfly3D"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11181404
RE: 2102 FAI/F3A EUROPEAN CHAMPIONSHIP
Congrats to all the top 10 pilots.. especially CPLR... he still dominates F3A... & thats the highest class i know & nothing compares FAI flying not even IMAC....[:D]
Posted on: 8/5/2012 12:43 AM by Author "highfly3D"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11181363
RE: 2102 FAI/F3A EUROPEAN CHAMPIONSHIP
I want to see the unknown videos flown by CPLR
Posted on: 8/4/2012 8:25 AM by Author "highfly3D"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11180673
RE: F3A Results - SPOILER
Wow i liked the way you said it.... YS is the only way to go even CPLR says this i think....[:D] & also the people who are returning back to the YS say it..[:D]
Posted on: 8/4/2012 2:03 AM by Author "highfly3D"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11180463
RE: Electric Vs Engine.
would it be possible to fly the YS with only 15% nitro?? just asking..
Posted on: 8/3/2012 8:49 AM by Author "highfly3D"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11179616
RE: F3A Results - SPOILER
I need to see Andrews video also.
Posted on: 8/3/2012 8:41 AM by Author "highfly3D"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11179605
Electric Vs Engine.
Hi, The reason to start this thread is my simple question to you all with regards to fly F3A FAI class which is really better Electric or Glow. Hope to get many more answers here. I personally have flow small electric planes but never F3A size plane.
Posted on: 8/3/2012 12:33 AM by Author "highfly3D"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11179326
RE: F3A Results - SPOILER
Did anyone took videos would like to see videos of top 3 pilots....
Posted on: 8/2/2012 11:20 PM by Author "highfly3D"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11179298
RE: 2102 FAI/F3A EUROPEAN CHAMPIONSHIP
makes these F3A planes looks like bat fins.. & how they are so light in weight?
Posted on: 8/2/2012 5:35 AM by Author "highfly3D"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11178256
RE: 2 cycle engines for F3A
would like to see the video of the OS 33GT flying pattern.
Posted on: 8/2/2012 4:18 AM by Author "highfly3D"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11178196
RE: 2 cycle engines for F3A
Yes, I totally agree with you on the YS 4 cycle engine nothing can compares these engines today not even E- power, but if there is a 200RX like a OS 140RX will it be good enough for the FAI class?? my point is not many people can afford the YS [:D] any thoughts on this.
Posted on: 8/1/2012 3:13 AM by Author "highfly3D"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11176926
2 cycle engines for F3A
Hi, I would like to know what would be the best 2 cycle engines we can use for a F3A plane apart from a Gas engine as i don't prefer them... I know the OS 160 engine is great but not that good for a FAI class. Also my question is if there be engine say 30 to 32cc 2 cycle glow engine will it be a good option for a F3A high class maneuvers if the engine is light weight enough? Thanks, Harry
Posted on: 7/31/2012 10:15 PM by Author "highfly3D"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11176797
RE: European Championship 2012 are you in...
Check out the latest scores looks like CPLR is leading...[:D] http://blog.naver.com/PostView.nhn?blogId=lwforce&logNo=150143844789&redirect=Dlog
Posted on: 7/30/2012 1:48 AM by Author "highfly3D"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11174164
| 
