|
RE: Top Flite '.60 size' P-51D Mustang ARF: Building & Modifications
RBean, that looks awesome, thanks for the advice... what size prop are you running and are you using a ignition battery? also noticed that you are not using the stock retracts, is there a problem with the stock retracts? if yes, what are you using? Thanks Hosam
Posted on: 4/12/2012 3:45 PM by Author "hosam"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11039416
RE: Top Flite '.60 size' P-51D Mustang ARF: Building & Modifications
Hi Guys, I am looking at this plane and want to put a DLE20 in it... I know about the weight issue but I am more concerned about fit within the cowl, does any one have pictures of a DLE20 or any other gas motor in this plane? Regards Hosam
Posted on: 4/12/2012 10:21 AM by Author "hosam"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11039057
RE: rcu for sale page
well I am having a hard time getting there... any feedback?
Posted on: 12/4/2010 2:46 PM by Author "hosam"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10176069
RE: DeWalt A123 Packs at Amazon
Thud, I did a google search as well and found them out there but I guess i was not clear in my question. Are these batteries still genuine A123 cells? or has Dewalt substituted them with cheap stuff? Cheers Hosam
Posted on: 8/10/2010 1:54 PM by Author "hosam"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9924038
RE: DeWalt A123 Packs at Amazon
Has any one purchased any of these packs lately? It seems that Tool King has been out of stock for the last 3 months?
Posted on: 8/10/2010 12:08 PM by Author "hosam"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9923776
RE: New Hitec Aurora 9-Channel 2.4Ghz Radio System
Folks, Is there any one that can help me understand the "OST" function in the D/R & EXPO menu... Also, what does "T.App" in the P-Mixx do? any help would be great. BTW I have looked in A.T.'s FAQ page and found no info. Also an example would be great... Regards Hosam
Posted on: 8/2/2010 12:54 PM by Author "hosam"
in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=9905569
RE: SLICK ?
I have the 89 Slick with a DA50, the 70 Slick with a MT35 gasser and the 51 Slick electric and there is no comparison between them and any other plane I have flown that call themselves 3D planes... The 89 Slick hands down is the best flying plane I ever owned.... I am currently building the Extra SHP with a DA50 for IMAC, another great example from 3DHS... Cheers Hosam
Posted on: 7/21/2010 6:07 PM by Author "hosam"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=9879497
RE: what 30cc plane do you own?
cloudancer03, slicks indeed are beautiful... and they fly so well I own the 51, 70 and 89.
Posted on: 6/19/2010 12:52 PM by Author "hosam"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=9813509
RE: what 30cc plane do you own?
MTK, I am not realy sure how to take that... what differnece and concern of yours if I built it or not??? and as a matter of fact I did build it...
Posted on: 6/18/2010 9:15 PM by Author "hosam"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=9812490
RE: what 30cc plane do you own?
thank you Matt.. Hosam
Posted on: 6/18/2010 8:02 PM by Author "hosam"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=9812353
RE: what 30cc plane do you own?
MT35 in my 3D Hobby Shop AJ Slick 70. Flys her with authority...
Posted on: 6/18/2010 1:00 PM by Author "hosam"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=9811522
Hitec 7955TG servo issue???
I think I am having issues with my Hitec 7955TG servos. The servos were purchased new last year for my 50CC plane and exhibited no issues the entire season. Over the weekend I went thought the plane to prep it for the flying season and noticed 2 of the servos (one on an Aileron and the other on an Elevator) would jitter like crazy constantly and never stop unless I unload the control surface. Also the control surfaces would actually deflect about an 1/8� in both directions and the servo never settles to the natural position. What gives? Are my servos going bad?
Posted on: 3/30/2010 11:08 AM by Author "hosam"
in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=9624029
RE: A123 loose cells
Radical RC has everything you need... www.radicalrc.com
Posted on: 3/19/2010 10:13 PM by Author "hosam"
in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=9596435
RE: A123 loose cells
Thud_Driver, thanks for the info, looks like a good deal... 4*60, would like to see your outcome... Hosam
Posted on: 3/10/2010 8:01 AM by Author "hosam"
in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=9569520
A123 loose cells
Guys, I want to build my own A123 battery packs to power my radio gear for my Gas planes and am looking for someone to direct me to a source for loose cells. Thanks Hosam
Posted on: 3/9/2010 12:45 PM by Author "hosam"
in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=9567314
RE: nitro models 50cc yak??? the good/bad/ugly???
Folks, I bought a used Yak and think its this plane. I need a canopy, can some one put some pictures of the canopy with dimensions on here so I can compare to the cracked one I have. Thanks Hosam
Posted on: 2/5/2010 12:41 PM by Author "hosam"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=9478581
RE: World Models Ultimate 120
Stangevil29 and Mike, thanks for the information. Cheers, Hosam
Posted on: 1/17/2010 12:09 PM by Author "hosam"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=9423339
World Models Ultimate 120
Hello Folks, Any one build and flew or is in the middle of building this plane? If yes, please give me some insight on the aiframe and engine used. How did it perform with your engine choice? Any mods you made? Thanks Hosam
Posted on: 1/15/2010 12:59 PM by Author "hosam"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=9418273
Programing issue with my 5945
Guys I need help on the Hitec programmer (HFP20). My problem goes like this, I am setting up my Hitec 5945 with my Futaba 9C and PCM receiver. The servo is first rest to factory specs by the programmer and the CW/CCW is set for the correct control surface movement; nothing else is set at this point. The servo is then connected to the receiver and the radio is turned on to check to see if the center mark with the horn used is perpendicular to the servo case and in this case it is dead on. The servo is now connected to the programmer in the servo socket and the receiver is connected in the receiver socket. The end point & center command is chosen and the first thing I check for is the center and it needs to be set at –5 (using the M button) to be dead on (same position as with the servo connect to the receiver and both radio and receiver are powered up). Then the knob is turned to –105 to set the right position (up button) then 95 to get the left position set (down button) to get the starting desired travel. After bring the knob back to the –5 mark the input button is pressed to exit the programmer. When the servo is plugged back to the receiver directly to check for center and travel I noticed that the servo is now off center. What am I doing wrong?
Posted on: 4/21/2009 3:16 PM by Author "hosam"
in the forum "Hitec/MultiPlex Radios- Ask Hitec Customer Service"
http://www.rcuniverse.com/forum/fb.asp?m=8702332
High speed needle issue
Guys, I need you help on this one really bad... My new 2 stroke motor seams to run at its best (and I do mean best) is when the high speed needle is fully closed and will still continue to run at full throttle and idle with no issue... And yes it is gettign hot, so what gives? please help Thanks Hosam
Posted on: 4/2/2009 6:50 PM by Author "hosam"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8642829
10C and 12FG
Hello Futaba Support, I would like to purchase either the 12FG or the 10C with the 2.4 providing that I can pull out the module and replace it with my 9CAP module so I can still use my 72 band Rx, is that possible? Cheers Hosam
Posted on: 3/30/2009 12:29 PM by Author "hosam"
in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=8631226
RE: Futaba 9C versus JR 9303
Guys, thanks for all the feedback... the switch assignment is one thing I do love about my 9C... I think I will sell them both and get a 2.4, maybe 10C to take advantage of Futaba special... again maybe...
Posted on: 3/25/2009 11:28 AM by Author "hosam"
in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=8615014
Futaba 9C versus JR 9303
and help in this matter… Hosam
Posted on: 3/24/2009 4:05 PM by Author "hosam"
in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=8612024
9C Flap Ailerons setup on a Chipmunk
Help… I am setting up a Super Chipmunk with ailerons and flaps. My original setup was to put right aileron on channel 1, left aileron on channel 6 with flapron mix and the 2 servos that control the flaps in a Y-connector on channel 5. All works great except I cannot reduce the amount of travel on my flaps (full down or nothing)… Please give me a breakdown on setting up this wing setup so I can control the amount of travel (preferably on a 3 switch position for full down, half way down and nothing)…
Posted on: 3/8/2009 6:33 PM by Author "hosam"
in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=8556854
RE: H9 Taylor Craft ?
Hi obie1 , I had one of those and flew several dozen flights without the struts, they are not needed... If you go to the link below, Bill Brundle (post 6) gives his input on strut use for the H9 TC. [link=http://www.rcuniverse.com/forum/m_5890049/anchors_5890049/mpage_1/key_hanger+9+taylorcraft/anchor/tm.htm#5890049]H9 TC Struts[/link] Cheers Hosam
Posted on: 10/10/2008 9:58 PM by Author "hosam"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=8037790
RE: Starting a Norvel .074
Rascal... I f I do consider selling this engine, will a AP 061 fly it? Hosam
Posted on: 8/8/2008 11:21 AM by Author "hosam"
in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=7823592
RE: Starting a Norvel .074
Guys, thanks for all the help on this. I have pulled th engine out of the airframe and next week, I will work on removing the plug cap and back plate to break the motor in. One more question, I noticed on Tower that AP has a 061, is that a Norvel copy or is it a Norvel now made by AP engines? Cheers Hosam
Posted on: 8/7/2008 8:01 AM by Author "hosam"
in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=7818945
RE: Starting a Norvel .074
combatpigg, that is an interesting method. how do you get the head of this guy? It seems that I need some kind of a tool that will help in twisting the head off (or the top plate) as well as the back plate. sorry to ask stupid questions but the smallest engine I ever had (besides this one) was a OS 15 and that had normal glow head. Cheers Hosam
Posted on: 8/4/2008 9:05 PM by Author "hosam"
in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=7809011
RE: Starting a Norvel .074
Dave, Thanks for the information. I will take a look at the required equipment you mentioned. The engine has never been run, so I guess I should ask about the break-in process too… Cheers Hosam
Posted on: 8/4/2008 6:51 PM by Author "hosam"
in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=7808456
Starting a Norvel .074
help would be greatly appreciated. Thanks in advance. Hosam
Posted on: 8/4/2008 12:47 PM by Author "hosam"
in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=7807201
| 
