|
RE: 6th scale f-22 Raptor
they seemed to be ok but remember that I used a SS plate and just did the shape for the nozzle in aluminum. what you could also try is high temp epoxies (you can usually go near 250Deg C)
Posted on: 2/24/2009 11:16 PM by Author "hpghost"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8515429
RE: 6th scale f-22 Raptor
hi my friend! looks like you are closer to the end of project! mine is still slow. again congrats for the great job...can t wait see you flying it!
Posted on: 2/24/2009 4:44 PM by Author "hpghost"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8513781
RE: Dubai International Jet Rally 2009
could you put this video online?
Posted on: 2/16/2009 3:26 AM by Author "hpghost"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8481821
RE: Dubai International Jet Rally 2009
Will, you are most welcome home!
Posted on: 2/14/2009 8:11 AM by Author "hpghost"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8475270
RE: Dubai International Jet Rally 2009
last
Posted on: 2/8/2009 2:35 PM by Author "hpghost"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8452975
RE: Dubai International Jet Rally 2009
more again...
Posted on: 2/8/2009 2:32 PM by Author "hpghost"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8452961
RE: Dubai International Jet Rally 2009
more...
Posted on: 2/8/2009 2:28 PM by Author "hpghost"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8452947
RE: Dubai International Jet Rally 2009
ok guys, took some pictures yesterday so here are few of them... the event was nice with fantastic pilots and planes! btw...be ready for next year as it will be happenning again and in a bigger way!
Posted on: 2/8/2009 2:25 PM by Author "hpghost"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8452934
RE: Dubai International Jet Rally 2009
I heard there are some fees to watch. What are they? Any program?
Posted on: 2/5/2009 11:30 PM by Author "hpghost"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8443907
RE: f22 raptor-rc work on progress!
you guess right ...Centigrade
Posted on: 12/22/2008 11:43 AM by Author "hpghost"
in the forum "Composites Fabrication And Repair"
http://www.rcuniverse.com/forum/fb.asp?m=8270908
RE: f22 raptor-rc work on progress!
yep...don t know if it is exactly 80..but in summer outside temp on shadow can reach 48 deg!...
Posted on: 12/22/2008 11:02 AM by Author "hpghost"
in the forum "Composites Fabrication And Repair"
http://www.rcuniverse.com/forum/fb.asp?m=8270770
RE: f22 raptor-rc work on progress!
yeah...it is definitly required to achieve good quality composites....don t want to see the plane blasting in the air or becoming soft on the 80 deg runway!
Posted on: 12/21/2008 11:23 PM by Author "hpghost"
in the forum "Composites Fabrication And Repair"
http://www.rcuniverse.com/forum/fb.asp?m=8269570
RE: 6th scale f-22 Raptor
hi bela, I really wonder how you will be able to make thse complex retracts in metal... the details look really nice.
Posted on: 12/15/2008 11:39 PM by Author "hpghost"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8250224
RE: 3d cnc probe
yeah it is very simple to setup. you just say which suface to cover, which depth max, which steps and the mach 3 does the rest for you. output as said is "points cloud"...extension is txt or other...doesn t make any difference. basically each line will have one point coordinates.
Posted on: 12/14/2008 11:35 PM by Author "hpghost"
in the forum "Composites Fabrication And Repair"
http://www.rcuniverse.com/forum/fb.asp?m=8246652
RE: 3d cnc probe
for probing I use Mach 3. then you can import the cloud point in your favourite 3d software (catia or other)
Posted on: 12/14/2008 2:04 PM by Author "hpghost"
in the forum "Composites Fabrication And Repair"
http://www.rcuniverse.com/forum/fb.asp?m=8244838
RE: f22 raptor-rc work on progress!
this week end I started to build the composite Oven which will cook my airplanes. here is few shots of the status.
Posted on: 12/14/2008 9:18 AM by Author "hpghost"
in the forum "Composites Fabrication And Repair"
http://www.rcuniverse.com/forum/fb.asp?m=8244142
3d cnc probe
hi guys, just wanted to share with you some work I did recently (while having a sort break on my f22 raptor building): a 3 scanning probe for CNC. some more info or pics can be found on my website! the precison is quite good and the device can be very usefull when importing plastic models into 3d software for upscalling and modification.
Posted on: 12/14/2008 9:15 AM by Author "hpghost"
in the forum "Composites Fabrication And Repair"
http://www.rcuniverse.com/forum/fb.asp?m=8244134
RE: 6th scale f-22 Raptor
yes... look there: [link]http://www.rcuniverse.com/forum/m_3189695/mpage_10/tm.htm[/link]
Posted on: 12/3/2008 2:25 PM by Author "hpghost"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8209078
RE: 6th scale f-22 Raptor
hi bela, long time didn t chat with you! Happy to see some nice scale progress! I agree with Mike, your 3d Job is excellent. on my raptor I did the same mistake...starting the construction before having 100% of the model right on computer... cost me lot of sanding / filling...got the lesson!...will not happen again! hope to chat with you soon. regards
Posted on: 12/3/2008 5:25 AM by Author "hpghost"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8207837
RE: f22 raptor-rc work on progress!
hi guys... just a little update after my week end.... did some sealing between wings, rudders, stabs and fuse...now it look much more clean!
Posted on: 11/22/2008 8:30 AM by Author "hpghost"
in the forum "Composites Fabrication And Repair"
http://www.rcuniverse.com/forum/fb.asp?m=8171646
RE: f22 raptor-rc work on progress!
yes it is a long very long project because I don t have much time to work on it since last 2 years...but I am now try to expedite the work. wings, rudders and stabs are now final plugs ready for finishing but as I manipulate them a lot for building the airframe, I didn t wanted to go further now. In the meantime I also built a test retract system and the fuel cells. I lost tons of time due to the fact that my initial drawings for the back of the airframe was totally wrong so lost of cutting, sanding, filling, etc.... At last there as other reason for going slow but that will be disclosed in few months...[:D]
Posted on: 11/19/2008 9:38 AM by Author "hpghost"
in the forum "Composites Fabrication And Repair"
http://www.rcuniverse.com/forum/fb.asp?m=8162353
RE: f22 raptor-rc work on progress!
here are some pics. as you can see I have redone the rudder with a better shape (still not finalized but almost). the airframe still need plenty of sanding and filling. then I will be able to add some more shapes on it. project is moving not very fast but surely will go till the end!
Posted on: 11/16/2008 2:01 PM by Author "hpghost"
in the forum "Composites Fabrication And Repair"
http://www.rcuniverse.com/forum/fb.asp?m=8153176
RE: f22 raptor-rc work on progress!
yes... at last there is some but don t have pics yet...will upload some later today. I am now working weekly.
Posted on: 11/16/2008 8:18 AM by Author "hpghost"
in the forum "Composites Fabrication And Repair"
http://www.rcuniverse.com/forum/fb.asp?m=8152420
RE: f22 raptor-rc work on progress!
not at the moment...only little...did some work but messed it up so came backward lol....
Posted on: 8/15/2008 6:18 AM by Author "hpghost"
in the forum "Composites Fabrication And Repair"
http://www.rcuniverse.com/forum/fb.asp?m=7848032
RE: P-160SX first impression and test
to compare, we can make a small trust bench and test all 3 engines (merlin g-booster and jetcat) and mesure the differents acclelerations, trust ,etc...they are all available here... [;)]
Posted on: 6/29/2008 11:46 AM by Author "hpghost"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7674111
RE: PST F-84G flight video
I was there...can tell you..this engine is really noisy! the flight was great. Congrats !
Posted on: 6/27/2008 7:48 AM by Author "hpghost"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7666856
RE: f22 raptor-rc work on progress!
some latest pics
Posted on: 5/28/2008 12:28 PM by Author "hpghost"
in the forum "Composites Fabrication And Repair"
http://www.rcuniverse.com/forum/fb.asp?m=7551179
RE: f22 raptor-rc work on progress!
well, I am not sure to understand what do you mean. but my wing was design as a 3d volume, then CNC milled...
Posted on: 5/28/2008 3:10 AM by Author "hpghost"
in the forum "Composites Fabrication And Repair"
http://www.rcuniverse.com/forum/fb.asp?m=7549968
RE: f22 raptor-rc work on progress!
what do you mean?
Posted on: 5/27/2008 11:25 PM by Author "hpghost"
in the forum "Composites Fabrication And Repair"
http://www.rcuniverse.com/forum/fb.asp?m=7549408
RE: f22 raptor-rc work on progress!
here we are! wings, rudders, stabs....all fixed! now starting to work on the airframe again!
Posted on: 5/26/2008 3:22 PM by Author "hpghost"
in the forum "Composites Fabrication And Repair"
http://www.rcuniverse.com/forum/fb.asp?m=7542749
| 
