|
RE: Anyone Know How to Fly a Parkflyer? WAA-08 Needs You.
send it down to miami....i want to be part of history!
Posted on: 4/29/2008 12:12 AM by Author "i live for 3D"
in the forum "Park Flyers & Backyard Flyers"
http://www.rcuniverse.com/forum/fb.asp?m=7433564
RE: aileron adjustment?
what plane?
Posted on: 4/28/2008 11:48 PM by Author "i live for 3D"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=7433492
RE: Typhoon 2 Owners anyone installed an Outrunner Yet?
shouldnt be hard............do you know what the typhoon weighs?
Posted on: 12/18/2007 10:43 PM by Author "i live for 3D"
in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=6776164
RE: Epoxy on depron Flat Foamy
i wouldnt recommend epoxy.......it ads alot of weight. Light is good. I would wait for the CA
Posted on: 12/18/2007 10:31 PM by Author "i live for 3D"
in the forum "Foamies! - RC Electric Foam Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=6776084
RE: Eflite Enticement
also do not use an e-flite 250......weighs a little bit much if you want to kep this under 5oz.....i would recommend the hacker A10 15s with an x-5 esc and dymond D47 servos........only way to go.....
Posted on: 12/6/2007 7:25 PM by Author "i live for 3D"
in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=6723121
RE: Eflite Enticement
well it is OK. depending o what you want to do. if you fly F3a i wouldnt recomend it. your own design is always best IMO. but if you do wnat an "ARF" i would recommend the f3p vrolet
Posted on: 12/6/2007 7:23 PM by Author "i live for 3D"
in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=6723113
RE: Does anyone see a problem with this?
, and that is all the power it should need. If you want to do 3D, then get a Twist 60, Showtime
Posted on: 12/6/2007 7:16 PM by Author "i live for 3D"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=6723090
RE: Can someone explain vertical balance to me
put your plane in a knife edge position and see which way it rolls out........but this could also be dihedral. I say dont worry about it unless your flying pattern.
Posted on: 12/6/2007 5:38 PM by Author "i live for 3D"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=6722640
RE: "SPONSOR" Flying Shirt :)
tell him he can sponsor me aswell[sm=wink_smile.gif]
Posted on: 11/27/2007 10:28 PM by Author "i live for 3D"
in the forum "Off Topic Forum - Planes/Helis"
http://www.rcuniverse.com/forum/fb.asp?m=6683641
RE: New here
smoke on a trainer will be dead weight. you wont see any smoke really and will cost you about $100 to buy a pump and an extra tank. Not including smoke oil. but its pointless and wont work on a 46 glow engine. but on a my DA 100 it smokes AWESOME!.......im 14 too.
Posted on: 10/27/2007 9:50 PM by Author "i live for 3D"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=6547501
RE: quick LiPo question
ok guys...so charging them at 1 amp is good? thanks alot
Posted on: 10/27/2007 9:46 PM by Author "i live for 3D"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=6547485
RE: quick LiPo question
i was just using that as an example because i have 2 kokam 3s 1500mah batteries that i bought with a plane and only have a deans connector. so i cant balance them? how would that affect the batteries?
Posted on: 10/27/2007 6:55 PM by Author "i live for 3D"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=6546902
quick LiPo question
if i have this battery i cant balance the cells right? http://www.horizonhobby.com/Products/Default.aspx?ProdID=THP7303SJPL
Posted on: 10/27/2007 6:39 PM by Author "i live for 3D"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=6546845
RE: Very Bad Luck
hey guys, im in the latest issue of the AMA magazine. look in the back for district 5. Im sitting under a pit table trying to get some shade from the miami heat.[:D]....some other good news to tell you is that i will be a competing in the upcoming youth masters in south carolina.
Posted on: 10/2/2007 10:55 PM by Author "i live for 3D"
in the forum "Crash & Rebuild"
http://www.rcuniverse.com/forum/fb.asp?m=6442699
RE: Very Bad Luck
I know this is kind of late but the plane has been flying strong ever since. here is a new video: http://www.flyinggiants.com/gallery/showphoto.php?photo=35275&cat=500&ppuser=19219 and here are some pics
Posted on: 9/23/2007 10:20 PM by Author "i live for 3D"
in the forum "Crash & Rebuild"
http://www.rcuniverse.com/forum/fb.asp?m=6405733
RE: Very Bad Luck
.....
Posted on: 9/23/2007 10:18 PM by Author "i live for 3D"
in the forum "Crash & Rebuild"
http://www.rcuniverse.com/forum/fb.asp?m=6405755
RE: Very Bad Luck
more.....
Posted on: 9/23/2007 10:17 PM by Author "i live for 3D"
in the forum "Crash & Rebuild"
http://www.rcuniverse.com/forum/fb.asp?m=6405750
RE: Very Bad Luck
more
Posted on: 9/23/2007 10:16 PM by Author "i live for 3D"
in the forum "Crash & Rebuild"
http://www.rcuniverse.com/forum/fb.asp?m=6405739
RE: H9 cap 232 33% with a GT-80???
I have heard that it can hover it but i want to know if there will be any pull out? thanks,
Posted on: 9/14/2007 7:53 PM by Author "i live for 3D"
in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=6369026
H9 cap 232 33% with a GT-80???
Hey guys...im looking at getting my first gasser which is the hangar 9 cap 232 1/3. It is used and comes with a zenoah gt-80. I was just wondering if this engine will have enough pull out for hovers? I am at sea level so that might help a bit. I am mainly going to use this plane for IMAC basic/sportsman and freestyle. thanks, Tony
Posted on: 9/14/2007 7:22 PM by Author "i live for 3D"
in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=6368911
RE: rich model keecat.60 size kingcat with retracts
let us know how the maiden goes.
Posted on: 9/8/2007 12:42 PM by Author "i live for 3D"
in the forum "Extreme Speed Prop Planes"
http://www.rcuniverse.com/forum/fb.asp?m=6342688
RE: Pilot?
you also need a control panel [;)]
Posted on: 9/7/2007 7:25 PM by Author "i live for 3D"
in the forum "IMAC"
http://www.rcuniverse.com/forum/fb.asp?m=6340234
RE: Slow Stick Motor Mount/Gearbox
a slow stick airframe is only like $20 right?...why not just buy the whole thing and you will have extra spare parts
Posted on: 8/31/2007 6:13 PM by Author "i live for 3D"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=6311963
RE: 4.8v to 6.0v
that will be fine
Posted on: 8/31/2007 6:12 PM by Author "i live for 3D"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=6311958
RE: Crashed Pitts! Need help with new build
stick with foam much easier to repair
Posted on: 8/25/2007 12:53 PM by Author "i live for 3D"
in the forum "Crash & Rebuild"
http://www.rcuniverse.com/forum/fb.asp?m=6285222
RE: Hobbico Nexstar USB Interface Cable lost, where can I buy it?
if you lost it i think you are out of luck. They use the usb cable as security so you will need to buy a whole new realflight software. Where do you fly i see you are from boca. Im in miami if you need any help with your planes let me know.
Posted on: 8/17/2007 7:31 PM by Author "i live for 3D"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=6251732
RE: nitroplanes.com
what plane are you looking to buy? i have had good customer support with nitroplanes
Posted on: 8/10/2007 12:58 AM by Author "i live for 3D"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=6219268
RE: ShowTime 4D 90 and a OS 91 FS
what about an OMP katana 70?
Posted on: 8/8/2007 7:49 PM by Author "i live for 3D"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=6213649
RE: Truth is stranger than fiction in model airplanes
yea well i have lost 2 wheels in flight before!...i had to harrier it in for landing
Posted on: 8/8/2007 12:44 AM by Author "i live for 3D"
in the forum "RC Humor"
http://www.rcuniverse.com/forum/fb.asp?m=6210513
RE: WHAT'S WRONG WITH THIS PICTURE???
[quote]ORIGINAL: Hibrass OK... Is that an OS stamp on the Engine case??? Hibrass [/quote] the stamp says "52" as in magnum 52
Posted on: 8/6/2007 10:32 PM by Author "i live for 3D"
in the forum "AMA Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=6205386
| 
