RE: 30cc hommie
I received the letter from you today. Thank you Dave
Posted on: 8/24/2012 12:24 PM by Author "idocdave09" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11204664

RE: 30cc hommie
On it's way to you. Dave
Posted on: 8/21/2012 1:17 PM by Author "idocdave09" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11201176

30cc hommie
30cc hommie watercooled cyl. and piston free to a good home pay shipping only. Dave
Posted on: 8/20/2012 3:33 PM by Author "idocdave09" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11200064

RE: Need help with water pump issue
I do not even use silicon for the water lines I have had them kink and restrict the water flow, I caught it in time no damage. I found this at Dave's http://www.davesmotors.com/s.nl/c.885035/n.1/it.A/id.4420/.f it works great for the pulse line remember the shorter the better. Take the pumps apart and check them. Dave
Posted on: 8/20/2012 8:54 AM by Author "idocdave09" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11199670

RE: ENFORCER OWNERS ~~ This is your thread
[quote]ORIGINAL: tootalltechie Just did a compression test on my engine... no oil in cylinder first pull 30 to 45psi, second pull oil in cylinder up to 50 to 60psi and maxed out at that. Is this good or is my ring leaking? thanks Dave I will check that out on Sunday. thanks Gordon [/quote] Worked a lot more with four strokes and in the shop 100 psi or under no start but like I said two strokes are different due to design. Dave
Posted on: 8/18/2012 6:32 PM by Author "idocdave09" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11198225

RE: ENFORCER OWNERS ~~ This is your thread
[quote]ORIGINAL: tootalltechie Dave, plug is wet, I replaced flywheel key. What should the compression be when tested? Is doing a compression test different on a 2 cycle compared to a 4 cycle? Should I test "squish"? [/quote] Dry the plug/try a new one the plug should only be damp not wet , wet means it's flooded( a common problem ) When you remove the plug pull the engine over a few times and check how much fule sprayes out GROUND THE PLUG WIRE WHEN YOU DO THIS TO AVOID FIRE if you get a lot turn the boat over and repeat with the engine upside down until very little comes out. As far as compression two strokes are done the same way but many variables when checking because of the basic design of the engine as far as transfer port height etc., the engine should pull over crisp and pop good when you pull it over. Dave
Posted on: 8/18/2012 6:06 AM by Author "idocdave09" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11197656

RE: ENFORCER OWNERS ~~ This is your thread
Is the plug wet or dry when you take it out, also what about flywheel key. Dave
Posted on: 8/17/2012 6:41 AM by Author "idocdave09" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11196710

Ck this out
Aqua-Mania passing some boat traffic at the Poker Runs America 2012 A-Bay run Aqua-Mania passing some boat traffic at the Poker Runs America 2012 A-Bay run http://www.youtube.com/watch?v=B0g7QFMNGs0&feature=related
Posted on: 8/15/2012 6:41 PM by Author "idocdave09" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11195116

RE: Rio 51 Shaft & what else...?
Thrust bearings?? Don't know the boat but I have it on my boat. Dave
Posted on: 8/3/2012 1:38 PM by Author "idocdave09" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11179901

RE: Best Gas motor for $200?
Remember this XForce engines are the product ofEnforcer Manufacturing with many of the components manufactured inthe USA as well as abroad. All engines are handassembled in our factory in the USA, and carry the best, and possiblyonly warranty program in the model engine industry.
Posted on: 8/2/2012 2:23 PM by Author "idocdave09" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11178854

RE: ENFORCER OWNERS ~~ This is your thread
[quote]ORIGINAL: mandroidxl Now Im wondering if I should maybe just mount the fuel dot inside the hul so I dont have to do any drilling.......... Do any of you guys out there use fuel dots? Or are u all re-fueling with a funnel Thanks, mike [/quote] Remember inside or outside you need a way to know when the tank is full. Dave
Posted on: 7/24/2012 7:40 AM by Author "idocdave09" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11167182

RE: Alu Hook and Handle
You can find it here Dave http://www.horracing.com/product_info.php?cPath=52_107&products_id=187 http://www.horracing.com/product_info.php?cPath=52_107&products_id=522
Posted on: 7/19/2012 6:19 AM by Author "idocdave09" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11160968

RE: Blackjack 55 how to lock the crank??
Thank you I was waiting for someone to bring this up this is my feelings also. Dave
Posted on: 7/16/2012 7:59 AM by Author "idocdave09" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11157192

RE: Shockwave 55 boat??
Try this for gel coat repair hope it helps you out Dave http://www.whhonline.com/category-s/120.htm http://www.whhonline.com/category-s/121.htm
Posted on: 6/18/2012 3:55 PM by Author "idocdave09" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11122857

RE: Air-cooled to water
Something like this http://www.whhonline.com/product-p/xfm5k21.htm
Posted on: 6/4/2012 1:07 PM by Author "idocdave09" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11106153

RE: Water pump port?
From what I have seen if it's on the bottom of the intake fuel/oil get into the pump, I have taped into the case and keep the pump above so no oil stays in the pump. Also use stiff tubing to let the pump at it's best. Dave
Posted on: 6/1/2012 4:57 PM by Author "idocdave09" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11103087

RE: water fittings 90 degree.
Here is some more http://www.horracing.com/product_info.php?cPath=47&products_id=181
Posted on: 5/13/2012 1:43 PM by Author "idocdave09" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11079374

Good gas
http://pure-gas.org/index.jsp?stateprov Adding new stations all the time ck back often. Dave
Posted on: 4/30/2012 2:45 PM by Author "idocdave09" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11063000

RE: K&B Boat engine
I can't help but the ones who can will want pictures I think
Posted on: 4/15/2012 3:08 PM by Author "idocdave09" in the forum "Speed - RC Nitro Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11043156

A great historical clip worth keeping.
A great historical clip worth keeping. Japanese surrender, Sept. 2, 1945 This film is believed to have never been seen before, only shots of the surrender were known. If you are a history Buff you will enjoy this. General McArthur’s voice is a rarity in these old film clip ACTUAL VOICE OF GENERAL McARTHUR NEVER BEEN SHOWN TO GENERAL PUBLIC BEFORE. Japanese Surrender- Amazing Footage Sept 2, 1945.... This is a 'must see' for the WWII history buff or anyone interested in history. Interesting the other signers to the document, from New Zealand/Australia to Europe/Russia. This is an actual film made of the surrender ceremony of the Japenese to McArthur in Tokyo Bay inSeptember 1945. Actual voice of the General. Never been shown to the general public before. We always saw the "stills" but never the film itself. Click here: http://www.youtube.com/watch_popup?v=vcnH_kF1zXc&feature=player_embedded Japanese Surrender http://www.youtube.com/watch_popup?v=vcnH_kF1zXc&feature=player_embedded
Posted on: 4/15/2012 3:04 PM by Author "idocdave09" in the forum "Off Topic Forum - Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11043150

RE: RCMK twin = 52cc's of rubbish
Ck ground on the coils also ck the flywheel key/keys as stated in another reply experence with Brigs and Straton taught me that the hard way, had spark but not at the right time to start. Dave
Posted on: 3/25/2012 6:33 PM by Author "idocdave09" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11014879

RE: Why would my engine do this?!
When it doesn't start pull the sparkplug and check if it's wet or dry that will tell you to much or not enough fuel and also check for spark. Dave
Posted on: 2/24/2012 5:16 PM by Author "idocdave09" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10974449

RE: what grease for the shaft ?
Something like this will work http://www.harborfreight.com/3-oz-mini-grease-gun-93486.html
Posted on: 2/16/2012 3:28 PM by Author "idocdave09" in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=10962155

RE: need help on a zen G260PUM
A good plug is a medium chocolate brown
Posted on: 1/30/2012 1:36 PM by Author "idocdave09" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10935529

RE: need help for my rio 51
Do you have an auto bailer {could be stuck} or some other device for removing water while moving forward
Posted on: 1/9/2012 1:08 PM by Author "idocdave09" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10900227

RE: Best Oil
http://klotzlube.com/techsheet.asp?ID=48&submit2=View
Posted on: 12/28/2011 4:04 PM by Author "idocdave09" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10880213

RE: ENFORCER OWNERS ~~ This is your thread
[quote]ORIGINAL: jimmybigshot Feel like I'm talking to myself here... that's ok, I'm good at that! Had the team pro at 48.4 MPH today. Pretty good video. http://youtu.be/8vQXJ7T4X4w [/quote] I read all the posts here just don't respond often. Dave
Posted on: 12/1/2011 6:49 PM by Author "idocdave09" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10838981

RE: Help on unknown boat!
All I can tell you it's not a crackerbox hull. Dave
Posted on: 10/22/2011 8:08 AM by Author "idocdave09" in the forum "RC Boats General Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=10777349

RE: ENFORCER OWNERS ~~ This is your thread
I buy a 5000 ma 6 cell car/boat pack and remove one cell wire it up to plug into the batt port, it's good for many runs.
Posted on: 10/21/2011 4:53 PM by Author "idocdave09" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10776667

RE: Is this Oil ok for Zenoah?
the oil he asked about . http://www.amsoil.com/storefront/ait.aspx
Posted on: 10/20/2011 6:31 PM by Author "idocdave09" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10775345