|
RE: HK-450GT CCPM Alloy T-Rex compatible - Part III
[quote]ORIGINAL: mnemennth 'tis but a scratch! www.youtube.com/watch But seriously; both my HK450GT and my Hausler have seen as bad and I've rebuilt. Though, honestly, it did help that I had like 6 spare Hausler chassis complete at the time. If that happens to my HDX450 I'll cry. No, seriously. And there's nothin' worse than watchin' a fat man weep. On a side note; I have 2 unpainted Fusuno canopies that should fit that. I found them on clearance online described as for "Vision 500". I figured I'd use them on my HDX450 to get the extra room for 6s or 8s batteries and a HV setup with a more "wraparound" look. When they got here, I found they were for a Vision 50; my wife suggested I should tack them onto the back of the house for a toolshed. mnem I could still plant them in the back yard as "teepees" for the kids to play in... [/quote] Yeah that clip is so funny. Luckily Ive never had a crash that bad but the end result is the same. Pull em down and rebuild. The only difference is how many parts you have to buy. Im sure it would be cheaper to buy a new kit.
Posted on: 5/22/2013 6:25 PM by Author "ingleburn"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=11519753
RE: HK-450GT CCPM Alloy T-Rex compatible - Part III
[quote]ORIGINAL: rikybob Enjoy [youtube]http://www.youtube.com/watch?v=js0oFhGWqHw[/youtube] b [/quote] That was speed blather at its best. I was sure part 2 was coming up but doesnt look like it. I think you need a holiday.
Posted on: 5/22/2013 6:21 PM by Author "ingleburn"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=11519747
RE: HK-450GT CCPM Alloy T-Rex compatible - Part III
[quote]ORIGINAL: ahamay [quote]ORIGINAL: ingleburn Finally ordered the parts to upgrade the HK450 to TT. Couldnt find a place that had everything except for HK. Only ordered a tail holder and a tail boom holder as I have Align and Tarot stuff to make up the rest. Also picked up upgrades for the Mcpx BL from my LHS. Head, tail holder, solid boom and swash. And a new motor for the Nano
Posted on: 5/20/2013 12:48 AM by Author "ingleburn"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=11516775
RE: HK-450GT CCPM Alloy T-Rex compatible - Part III
Finally ordered the parts to upgrade the HK450 to TT. Couldnt find a place that had everything except for HK. Only ordered a tail holder and a tail boom holder as I have Align and Tarot stuff to make up the rest. Also picked up upgrades for the Mcpx BL from my LHS. Head, tail holder, solid boom and swash. And a new motor for the Nano. This is the second one Ive had fail. And to round it out ordered one of those cheap FBL heads from miracle Mart. Had my kids over this weekend so missed a flying day with the guys from the LHS. They had 3 bad crashes that were unexplained. Im thinking the substation next to the field might have something to do with it. This is a pic of what a thundertiger x50e Titan looks like when it goes in hard. I saw it in the shop this morning and it was in 2 plastic bags. A complete write off.
Posted on: 5/19/2013 11:40 PM by Author "ingleburn"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=11516755
RE: HK-450GT CCPM Alloy T-Rex compatible - Part III
[quote]ORIGINAL: ahamay [quote]ORIGINAL: ingleburn @ Jonesy. Thanks for posting the pic of the skids. Wow is all I can say. Looks like you are having a few issues with the build. Who would have guessed that the Tarot kit would have so many faults. Guess if I ever go down that path I would get the HK kit seeing as most of the parts need swapping or else just get the Align to start with . [/quote
Posted on: 5/17/2013 6:31 PM by Author "ingleburn"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=11514762
RE: HK-450GT CCPM Alloy T-Rex compatible - Part III
Hi all, just back from a 2 week trip away with work and finally have the energy to post. Been lurking while away and trying to keep up with the goings on. Didnt get much flying in apart from a couple of indoor flights with the Nano and a few with the Mcpx BL when I got off work early. Oh and one crazy attempt at flying the Nano in a garage after having a few to many beers at the pub. Man its hard to hover in a small space when your reflexes are shot. But it can be done but take my advice. Call it quits and dont try your luck by attempting inverted. @ Jonesy. Thanks for posting the pic of the skids. Wow is all I can say. Looks like you are having a few issues with the build. Who would have guessed that the Tarot kit would have so many faults. Guess if I ever go down that path I would get the HK kit seeing as most of the parts need swapping or else just get the Align to start with . @ Brian. I think the mod needs to do a bit more flying and a bit less touring round the country side. Glad your living the dream. @ Edmond. Glad your heli is back in one piece and in the air. Yeah I should always fly 2 mistakes high but wheres the fun in that. @ Simon. Since spring has sprung you should have a lot more videos. I see you are setting me some new challenges. I can see a few rebuilds coming up. @ mnemennth and Ddaddy. Maybe it was my long work hours but I dont think I understood much of what you were saying. Just glad when I turn my DX6i on ity works. @ Kozzy. Sorting through the parts this weekend. Will PM you the details. Hope your luck is improving with those helis. @ All. Hope you get some flying in this weekend. Im off to pick up some upgrades for the BL.
Posted on: 5/17/2013 4:40 PM by Author "ingleburn"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=11514656
RE: HK-450GT CCPM Alloy T-Rex compatible - Part III
Hi guys, well I finally got around to maidening my Pro this afternoon.A lot of surprises but didnt crash so thats a bonus. Had a lot of expo on it and really noticed the difference compared to the GT. It was so docile it wasnt funny. Had a few problems, the main one being not enough pitch. Had to have the stick almost 3/4 up to even hover. When I got home and put a pitch guage on it I found that at centre stick it had -3.5 ° pitch. Dont know how that happened as Im usually so careful setting them up. Wound out the links about 2 turns and now its spot on and swash is level. Readjusted the settings to get 10° pitch and 8° on Ele and Ail so all set for another try tomorrow, weather being good. Apart from the pitch problem it seemed to be smooth and stable so I think Im going to like it. [youtube]http://www.youtube.com/watch?v=HQn1O4PPZzY[/youtube]
Posted on: 9/17/2012 11:41 PM by Author "ingleburn"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=11231987
RE: HK-450GT CCPM Alloy T-Rex compatible - Part III
[quote]ORIGINAL: ahamay Finished my new Tarot 450 PRO last night, no blade spool and rattle test all done. We've had no rain for about 2 months and today it's pissing down. [/quote] Typical isnt it. Hope all goes well with the maiden. Just got 5 flights in with mine. Thought about trying a flip but chickened out. Did practise flying towards myself. That got the heart racing.
Posted on: 9/17/2012 5:04 PM by Author "ingleburn"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=11231665
RE: HK-450GT CCPM Alloy T-Rex compatible - Part III
[quote]ORIGINAL: hugj Hey To everyone. WHOOPIEE my hk550fbl has let and is on it's way to the states!!! I hope to get it soon? 1-5 weeks? When I get her i'll do a unboxing video and take pics or videos during the build! I'm going to retire the swift nx it has been a albertross eversince i got it I upgraded every thing trying to fix a poor design. The items going it the hk will be 1 beastx , 1 ar7000x, 3 savox cyclic servos, 1 savox tail servo kontronic esc castel volt regulator, edge 530mm main blades, align cf tail blades,1 1100kv motor. I hope it all works! Also the wife got a new align 550 canopy because she hated the one that comes with the kit. Wish me the best of luck, I'll keep you'all informed. Hugh [/quote] Cant wait to see it Hugh, especially with the canopy the wife picked out Wow its amazing how much more the electronics for those things cost. Out of my league for a while thats for sure.
Posted on: 9/17/2012 3:10 PM by Author "ingleburn"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=11231523
RE: HK-450GT CCPM Alloy T-Rex compatible - Part III
[quote]ORIGINAL: rikybob [quote]ORIGINAL: ingleburn [quote]ORIGINAL: sgbfly Lol, to oil or not to oil was a good one. Another classic was the vertical take off or slight drift to the left debate Actually I was quite culpable in those Anyway I see there are some videos to watch S [/quote] How quickly we forget. Yep I was guilty as well. Hope we didnt scare him off but Im glad barbie girl
Posted on: 9/17/2012 5:29 AM by Author "ingleburn"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=11230906
RE: HK-450GT CCPM Alloy T-Rex compatible - Part III
[quote]ORIGINAL: sgbfly Lol, to oil or not to oil was a good one. Another classic was the vertical take off or slight drift to the left debate Actually I was quite culpable in those Anyway I see there are some videos to watch S [/quote] How quickly we forget. Yep I was guilty as well. Hope we didnt scare him off but Im glad barbie girl only pops in every now and again.
Posted on: 9/17/2012 4:55 AM by Author "ingleburn"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=11230871
RE: HK-450GT CCPM Alloy T-Rex compatible - Part III
[quote]ORIGINAL: sgbfly No, it's not you mate. It also a little strange the people who insist there is no issue with the latest firmware. If I was to make such a bold statement I would support it probably with a video and try and offer reasoning. [/quote] The thing I find interesting is that the problem varies between helis. Mine pitches up way less than yours and some others hardly get bothered. Maybe its because I dont fly as fast as you into the wind but I have cheaper, slower servos as well so maybe thats why. Anyway I hope they sort it out soon or else the Hobbymate will be going on mine for a test.
Posted on: 9/17/2012 3:43 AM by Author "ingleburn"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=11230804
RE: HK-450GT CCPM Alloy T-Rex compatible - Part III
[quote]ORIGINAL: sgbfly Anyway, on rebuilding that heli I installed better radial bearings in the grips and stiffer dampers. Is there any hope that that will make a difference? S [/quote] You can always hope.
Posted on: 9/17/2012 3:17 AM by Author "ingleburn"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=11230794
RE: HK-450GT CCPM Alloy T-Rex compatible - Part III
[quote]ORIGINAL: sgbfly [quote]ORIGINAL: Kozzy_98 Cable tie? No, I thought it was a Zip-tie. NO IT WAS A CABLE TIE!! Oh well, doesn't matter, they both do the same thing... Is that how it goes on RCG? Haha, I hope not!! [/quote] That's FUNNY-I was wondering if it really was a TIE WRAP!! I'm a little disappointed tbh. I was getting some good technical input and now the thread has gone off on one. S [/quote] Sorry about that Simon but I didnt realise such a small comment would start the mess its turned into. All I was doing was pointing out that it wasnt velcro but a zip tie and the guy went nuts. Hopefully it will settle down and get back on topic.
Posted on: 9/17/2012 3:10 AM by Author "ingleburn"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=11230787
RE: HK-450GT CCPM Alloy T-Rex compatible - Part III
Hi guys, its been interesting conversation here thats for sure. Welcome back Rob, glad you could drag yourself away from your other hobby. Nice heli as well, even though its got a few extra bits on it. Glad to see you had a good time Edmund. Some video would be great. Thunderstorms rolling in here now so no flying for the next few days. Think I might stay away from RCG for a while after starting a slanging match over something as simple as a cable tie. Those guys honestly need to get a life.
Posted on: 9/17/2012 12:55 AM by Author "ingleburn"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=11230719
RE: HK-450GT CCPM Alloy T-Rex compatible - Part III
[quote]ORIGINAL: sgbfly Geez Roger, that sounds potentially nasty. Everyone, I got my HK-450GT rebuilt late last week and gave her a very gentle test flight this morning. So far so good and I'm glad a blade did not disconnect at 0.57 in this video... http://www.youtube.com/watch?v=72_tZXO_hQI Simon [/quote] Roger that would have been scary and fasinating at the same time. Obviously a fault in the blade and glad you wernt hurt. Simon, good that you are back in the air and heed the warning I left on YT. Good to see Polly is still around.
Posted on: 9/16/2012 3:17 PM by Author "ingleburn"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=11230280
RE: HK-450GT CCPM Alloy T-Rex compatible - Part III
[quote]ORIGINAL: ingleburn [quote]ORIGINAL: Ddaddy [quote]ORIGINAL: Ddaddy The server is live! [/quote] Server is dead. [/quote] What happened to it. I cant for the life of me get Phoenix to run. Everythings there but nothing happens. Will have to try and find the disk and do a reinstall but the kids are driving me mad and have to get ready to take them out soon. Sorry I missed the action
Posted on: 9/16/2012 1:57 AM by Author "ingleburn"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=11229781
RE: HK-450GT CCPM Alloy T-Rex compatible - Part III
[quote]ORIGINAL: sgbfly [quote]ORIGINAL: ingleburn [quote]ORIGINAL: sgbfly Hi Guy's, It's not just Edmund havng all the fun! This is me heading off on a helicopter flying lesson The second pic is when I had the sticks in a hover (well hover of sorts as I was over correcting - lol) Simon [/quote] Hope it wasnt using 3.5 That would be so much fun. [/quote] Thankfully
Posted on: 9/16/2012 1:54 AM by Author "ingleburn"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=11229780
RE: HK-450GT CCPM Alloy T-Rex compatible - Part III
[quote]ORIGINAL: sgbfly Hi Guy's, It's not just Edmund havng all the fun! This is me heading off on a helicopter flying lesson The second pic is when I had the sticks in a hover (well hover of sorts as I was over correcting - lol) Simon [/quote] Hope it wasnt using 3.5 That would be so much fun.
Posted on: 9/15/2012 3:05 PM by Author "ingleburn"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=11229544
RE: HK-450GT CCPM Alloy T-Rex compatible - Part III
[quote]ORIGINAL: Ddaddy [quote]ORIGINAL: Ddaddy The server is live! [/quote] Server is dead. [/quote] What happened to it. I cant for the life of me get Phoenix to run. Everythings there but nothing happens. Will have to try and find the disk and do a reinstall but the kids are driving me mad and have to get ready to take them out soon. Sorry I missed the action but will be better prepared next time.
Posted on: 9/14/2012 7:48 PM by Author "ingleburn"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=11228886
RE: HK-450GT CCPM Alloy T-Rex compatible - Part III
[quote]ORIGINAL: Ddaddy @Phil, ready for some balloon bursting?! @ALL, 9pm CST Phoenix Blathering with opening blather by rb on why NOT to do loops! Cheers, Ken [/quote] Damn, just updated Phoenix in readyness for the blathering and its crashed on me. Hopefully be back up and running soon but if not have fun guys.
Posted on: 9/14/2012 6:24 PM by Author "ingleburn"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=11228817
RE: HK-450GT CCPM Alloy T-Rex compatible - Part III
[quote]ORIGINAL: hugj Hey guy's just to let you know I cut the field tonignt and carried the gaui425 with the hobbymatefbl. you know 6min flight is just not long enough!!!!! Flew like I knew what i was doing! I love it !!!!!!!!!! Hugh [/quote] Good to hear. Mines on the way so get ready for a million questions.
Posted on: 9/14/2012 4:56 PM by Author "ingleburn"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=11228741
RE: HK-450GT CCPM Alloy T-Rex compatible - Part III
[quote]ORIGINAL: Edmund2 Hi guys, check out www.aadexpo.co.za tab to Airshow and guess who will be flying the Ex SAAF Impala indicated in the Participating Aircraft tab on page two? Getting a few dry runs tomorrow (fuel for 40 minutes flying time) with compliments from the sponsors as I can only be there on the airshow days. Edmund [/quote] That sounds like a lot of fun. Dont suppose you could put a cam on and get some video? Keep the paratroupers away this time.
Posted on: 9/14/2012 3:15 PM by Author "ingleburn"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=11228682
RE: HK-450GT CCPM Alloy T-Rex compatible - Part III
[quote]ORIGINAL: sgbfly Hi Guy's! Bad luck on the crash kozzy. I love Ingleburns closing comment! Speaking of crashes. I repaired mine yesterday. I've gone for a simple colour scheme to see if that helps with the FFF ele bug in Tarot FW v3.5. Actually I've tried better radial bearings (Align HS1032T) in the grips and tighter genuine RJX dampers but I'm not holding my breath! A couple of pics... Simon [/quote] Yeah Ive always heard that red goes faster so going with the white might slow it down. Just a thought Simon. As yours is the worst heli affected with the FFF bug, do you think it has anything to do with the HK head? Mine is not to bad now but I think Im reacting before it occurs by keeping a touch of forward Ele on it.
Posted on: 9/14/2012 3:23 AM by Author "ingleburn"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=11228094
RE: HK-450GT CCPM Alloy T-Rex compatible - Part III
[quote]ORIGINAL: Kozzy_98 Hey everyone! My flying streak with the #2 came to an end today! Was a typical beginner crash and had a blade strike, while landing a tad on the tail. Result = Stripped main gear, bent tail boom, bent flybar, busted main blades and thats about it. Main shaft hasn't bent, which is lucky. And as for the feathering shaft, I have absolutely no idea, but I don't think theres any damage to that either. Luckily, no damage to the fragile HXT900 cyclic servos as they are a pain to remove and install. My #1 helicopter is starting to frustrate me! Even with the gains down to the low 50s on a Spektrum radio, there is still a wag. I recall that someone said something about the tail servo and how far up the servo arm the ball link is attached to. Tail servo is a HK933MG servo, gyro is a HK401b. The beast helicopter is a frustrating build too. Upon realising that the belt was in the wrong direction, I flipped the belt and it was slipping everywhere. Changing the belt tension didn't help either. Upon realising the belt was dead, I decided to replace the belt. So I found a belt in the box that Phil gave to me. Silly me didn't check its length, and when I mounted the tail back on the tail boom, I realised that the belt was way to long, presumably for a 500 size heli. Oh well, my mistake! In my previous big order from HK, I placed an order for a Phoenix flight sim dongle. Suprise suprise, it WORKS! At least with phoenix v3.0p. Don't worry, I'm not going to give up! The satisfaction from flying one helicopter through 6 lipos in a row without crashing beats anything else!!! [/quote] Sorry about the crash but everyones been there, done that. All part of the learning curve. I wouldnt be surprised if the main shaft and feathering shaft have some damage so I would pull them and make sure. Better to replace if any doubt. As for #1 get rid of the gyro and like Jonesy said, pull the crashed one off and try it. Give up on them and try a LH GY520. The belt shouldnt slip in the beast so make sure that the gears on either end arent the problem, they might be slipping on the shaft. Its always a good day when you fly all your batteries without a crash. Think Im due for one real soon.
Posted on: 9/14/2012 2:59 AM by Author "ingleburn"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=11228082
RE: HK-450GT CCPM Alloy T-Rex compatible - Part III
[quote]ORIGINAL: ahamay [quote]ORIGINAL: ingleburn Yeah I hear you Jonesy. Who needs another heli anyway. Just been on the #16 forum and a new firmware and GUI just released. Great changes and everything is now truely plug and play. A lot of adjustments can be made to contrast, saturation, white balance and other things. GUI lets you format the card, check and install firmware and get program
Posted on: 9/13/2012 4:35 PM by Author "ingleburn"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=11227697
RE: HK-450GT CCPM Alloy T-Rex compatible - Part III
Yeah I hear you Jonesy. Who needs another heli anyway. Just been on the #16 forum and a new firmware and GUI just released. Great changes and everything is now truely plug and play. A lot of adjustments can be made to contrast, saturation, white balance and other things. GUI lets you format the card, check and install firmware and get program updates from the web. Manually install latest firmware first then run the GUI Firmware here. www.rcgroups.com/forums/showatt.php GUI here. www.rcgroups.com/forums/showpost.php
Posted on: 9/13/2012 4:24 PM by Author "ingleburn"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=11227685
RE: HK-450GT CCPM Alloy T-Rex compatible - Part III
[quote]ORIGINAL: ahamay [quote]ORIGINAL: rikybob [quote]ORIGINAL: ahamay My mcpx has been out of action for months and I have some parts arriving today to freshen it up. I think when they get to a point when they need major repairs and lots of parts replaced [i]it's better just to buy a new one.[/i] [color=#FF0000]I disagree!![/color] [/quote] All the best! b [/quote] Yeah, I'm in two minds with this. If you keep on top of the repairs and replace things as they break then it's ok, but if you let it go and you need a heap of stuff then it adds up. I've just replaced basically everything except the board and servos. About $80 worth. I think next time it will be a brushless conversion. Jonesy [/quote] Or a 130X .
Posted on: 9/13/2012 2:58 PM by Author "ingleburn"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=11227608
RE: HK-450GT CCPM Alloy T-Rex compatible - Part III
[quote]ORIGINAL: ahamay Got the TGY-306G installed into the tail on my new Tarot 450 PRO V2 FBL build this morning. Servo looks solid. It's nice and fast and SUPER loud. Would have been nice if it came with a round wheel servo horn as well but a bit of trimming on the standard horn sorted that. I've got some wiring to tidy up and some final pitch settings to check and it's ready for a maiden hopefully on Sunday. If anyone is interested in the specs for this build it's got the following config: Tarot 450 PRO V2 FBL barebones kit from oomodel ZYX v1 (not running 3.5 firmware) Hitec HS-5065MG on cyclic TGY-306G on the tail Spektrum AR6115e rx Turnigy H2218 Motor with 13T pinion (This is the red motor with the silver can, 3550kv) Turnigy Plush 40amp ESC CF Blades Standard in the kit Nano-Tech 2200mah 3S 35-70c Really looking forward to flying this one. If it's a screamer i'll drop a 13t pinion into my other 450 PRO as well. My mcpx has been out of action for months and I have some parts arriving today to freshen it up. I think when they get to a point when they need major repairs and lots of parts replaced it's better just to buy a new one. Hope everyone gets some flying in this weekend. I'll be out of the Phoenix Fly In, unfortunately during the day on a weekend I'm too busy. Jonesy [/quote] THat really does sound like a screamer Jonesy. Be interested in seeing how that tail servo goes. Im sure you will give it a thorough work out.
Posted on: 9/13/2012 2:52 PM by Author "ingleburn"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=11227603
RE: HK-450GT CCPM Alloy T-Rex compatible - Part III
[quote]ORIGINAL: Edmund2 Hi guys, Mrs E doing well at home though on pain killers and I spend Monday and Tuesday with her. Due to real sh.tty winds here I managed some indoor flying with the mCPX and a BOL to pass time. I can really get hooked on the fact that I am not at work. Just need that tiny lotto to help financially as the income fror the farm is a bit short atm but slightly ahead on our expectations. Rob, good to see you logged in, I missed your input., now Spiros must make his appearance again. Edmund [/quote] Glad the wife is doing well. Its been windy here but settling down now. Wouldnt we all like to win lotto.
Posted on: 9/13/2012 1:01 AM by Author "ingleburn"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=11226934
| 
