|
RE: molding a funjet for the micro turbines production
ill be makeing as many is needed i will probably make more than one mold if possible ill se how it goes then it comes down to what material i will make it out of did you use any formers or ribs or any reinforcing of any kind ?
Posted on: 9/23/2009 5:37 AM by Author "jamiechip"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9117322
RE: molding a funjet for the micro turbines production
looks good how did you go with it did you vac bag ? or just lay it up ?
Posted on: 9/22/2009 6:52 AM by Author "jamiechip"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9114662
RE: molding a funjet for the micro turbines production
pics of the retract bays so far bit of finishing work to do
Posted on: 9/12/2009 8:37 PM by Author "jamiechip"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9090411
RE: aircraft wheel brakes
one thing im still trying to find is the rubber for makeing wheels is there anyone out there that has made some or know of what rubber and where to find it ?
Posted on: 9/12/2009 6:35 PM by Author "jamiechip"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9090141
RE: molding a funjet for the micro turbines production
more pics did some more work tonight got the canopy to where it just needs smoothing out just trying to work out how to get the wing tips right any ideas ? going to do some more work on the retract bays tommorow will update with some more pics
Posted on: 9/12/2009 5:56 AM by Author "jamiechip"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9088923
RE: New JetJoe J-Junior 4lbs turbine
the fuel lines going to the trubine is 3mm after the fuel pump the fuel pump at the moment the turbines run the fuel pump for the jj1200 with a buy pass in the line as the voltage drop without the buy pass would be to low the flightworks 100b fuel pump works fine and jet joe is in the stage of developing a new pump ill put some pics up of my set up for you if you wish in close detail
Posted on: 9/11/2009 10:55 PM by Author "jamiechip"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9088372
RE: molding a funjet for the micro turbines production
thought of and done should be room for around 400-500 mil we will se how we go for room
Posted on: 9/9/2009 5:06 PM by Author "jamiechip"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9082162
RE: aircraft wheel brakes
anyone got pics of this system or break down pics on how they work and go together
Posted on: 9/9/2009 5:03 PM by Author "jamiechip"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9082159
RE: molding a funjet for the micro turbines production
if you want to be on the list can you please email me so i have your email adress and can send you all email updates pricing and so on as i get closer to finishing
Posted on: 9/9/2009 7:52 AM by Author "jamiechip"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9081081
RE: aircraft wheel brakes
i do the search all i get is compunds to do coatings not for the actual tyres if anyone knows what they call the rubber that might help
Posted on: 9/9/2009 7:13 AM by Author "jamiechip"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9081041
molding a funjet for the micro turbines production
this is a build thread for a funjet like plane with a few mods made from fiberglass i am currently in the process of building a plug to make a mold of this plane and will be offered for sale to anyone wishing to buy one will be equiped with brakes and retracts air operated should still be under the 1500 gram weight mark and far stronger that the foamies and all ready to go all the hard work done there will be a few options offered for everyone also for shipping to anywhere outside australia there will be a model offered in 3 peices with the fuse seperate to the wings any one interested in the model pm me and i will ad you to a list of people that are after one it should be avalable for sale in the next few months and anyone out there can follow the progress as i go i will upload some more images later a have done a bit more work to the plug since the pics were taken and it really takes a bit of time to get the plug right so that everything goes together just right and the plane flies like a rocket !!!
Posted on: 9/9/2009 6:51 AM by Author "jamiechip"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9081025
RE: New JetJoe J-Junior 4lbs turbine
my funjet is all finished now ready to fly just waiting for a good day also i will be starting a build thread for a funjet like plane with a few mods made from fiberglass i am currently in the process of building a plug to make a mold of this plane and will be offered for sale to anyone wishing to buy one will be equiped with brakes and retracts air operated should still be under the 1500 gram weight mark and far stronger that the foamies and all ready to go all the hard work done there will be a few options offered for everyone also for shipping to anywhere outside australia there will be a model offered in 3 peices with the fuse seperate to the wings any one interested in the model pm me and i will ad you to a list of people that are after one it should be avalable for sale in the next few months and anyone out there can follow the progress as i go
Posted on: 9/9/2009 6:42 AM by Author "jamiechip"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9081017
RE: aircraft wheel brakes
after talking to a mate he said that the model must not roll with static thrust wich makes sence of course and i think brakes are a good option does anyone know where to find the liquid rubber for the tyres i know they are molded from liquid i just beed to fing it a bit of searching has turned up nothing any help would be great
Posted on: 9/9/2009 6:17 AM by Author "jamiechip"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9080995
RE: aircraft wheel brakes
in some of the other pics there are diferent types of these brakes ofcourse the oring seams the easiest is there any other way of doing it that is easy enough to manufacture ?
Posted on: 9/7/2009 8:18 PM by Author "jamiechip"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9077105
RE: aircraft wheel brakes
thanks for that info looks like something easy enough to manufacture ill give it a go i thought it would be as simple as that ill update on how i go with it
Posted on: 9/7/2009 8:16 PM by Author "jamiechip"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9077096
aircraft wheel brakes
has anyone out there have any pics of a air powered brake for the wheels of the jets or break downs to explain how they work i am looking to machine up my own smaller set for a small turbine project but really need some help i normaly would not worry about it but under australian rules i belive from what i have been told you must have brakes on all turbine jets so i feel that machineing up my own small set would be the way to go anyone that can help that would be great or sheed some light on the rules a little more thanks regards jamie
Posted on: 9/7/2009 6:16 PM by Author "jamiechip"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9076846
RE: New JetJoe J-Junior 4lbs turbine
brett the warranty agent for ausjets has already adressed these problems and solved the issue's if you buy an engine from ausjets you wont go wrong for the best set up out there
Posted on: 8/26/2009 8:41 AM by Author "jamiechip"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9046112
RE: New JetJoe J-Junior 4lbs turbine
the e-flite will suit quite well i am also doing one and pland to make some bae hawks for these turbines my jjj is pushingout just under 4 pounds anyone interested in purpose built fiberglass planes for the kolibri or the jjj pm me and ill keep you informed of when they are ready
Posted on: 8/16/2009 5:55 PM by Author "jamiechip"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9020900
how to ? fiberglass funjet
hi there everyone im quite new to the fiberglass world and makeing molds from plugs and so on i have been stuffing around with funjets for a while and im looking for the best way to make a mold in two peices to copy thid plane i have an extra funjet here that i intended for use as a mold wich is still sitting in its box but i need some help do i do a two peice mold and then join the two halves togethere with a few ply formers ribs and so on or is there a better way i just cant thing how i would get biberglass inside the wing to join the two together so the best idea i have had so far is for the ply formers and balsa ribs i want to be able to have retracts fitted inside the plane and intend for this to be only for the small turbines and if i can get my mold to make a few of these this would be better for me cost wise im sure this process wont be cheap so any healp would be great
Posted on: 8/1/2009 6:41 PM by Author "jamiechip"
in the forum "Composites Fabrication And Repair"
http://www.rcuniverse.com/forum/fb.asp?m=8982023
RE: New JetJoe J-Junior 4lbs turbine
exatly how i feal 2gs worth of turbine compared to the next closest thing 5gs and all for a $100 foiam plane i know wich way im going ill save my extra cash for the next scale project where i do intend to buy a top quality turbine
Posted on: 7/26/2009 1:55 AM by Author "jamiechip"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8964202
RE: New JetJoe J-Junior 4lbs turbine
yes and i supose that you have one aswell and you really know how well they work !!!! but hay if something works and it cost half the amount straight away its crap !!! but i supose you all know best
Posted on: 7/25/2009 11:45 PM by Author "jamiechip"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8963997
RE: New JetJoe J-Junior 4lbs turbine
i had the engine assembled buy brett the warranty agent for ausjets the tail cone outlet is stock i will measure for you tommorow your heat issues may be in relation to two things the balancing of the engine from the factory is not satisfactory and the prload on the bearings i beleive plays a mager part if you need any info or you want it done right get in contact with ausjets here in australia and see about sending your engine to brett my original engine only costs me $70 more australian than from the factory and i came to me like that with the new inconel fuel ring and all the mods that brett has found to help like i have said before i really beleive he is the only one to get the engine through !!!! and the thermocoupler is about 1.5mm in as stated from breet to be the best place for it also my engine has a lot of mods to the fadec to make it run like that all work that brett has done and would probably benefit your engine if you need some contact info for brett or ausjets just pm me and ill let you know how to get hold of them !!
Posted on: 7/25/2009 8:20 AM by Author "jamiechip"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8962309
RE: New JetJoe J-Junior 4lbs turbine
http://www.youtube.com/watch?v=02jXBvKQnDc
Posted on: 7/25/2009 4:49 AM by Author "jamiechip"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8962188
RE: Good Airframe to suit lambert or jj juniour
new video of the engine run today on youtube http://www.youtube.com/watch?v=02jXBvKQnDc
Posted on: 7/25/2009 4:48 AM by Author "jamiechip"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8962184
RE: Good Airframe to suit lambert or jj juniour
i finally got my jj juniour tonight from ausjets the only place to buy one of these if you want one get it built buy a profesional exelent engine starts up really fast idle to 240000 in like 3 seconds super fast the work that bret does with these things is unbeleavable thanks brett anyone out there wanting one get it throught ausjets !!!!! http://www.ausjets.com/ also have to thank christian from ausjets for getting it all organised will post some video once i figure out how to put it on youtube
Posted on: 7/24/2009 8:09 AM by Author "jamiechip"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8959904
RE: New JetJoe J-Junior 4lbs turbine
i finally got my jj juniour tonight from ausjets the only place to buy one of these if you want one get it built buy a profesional exelent engine starts up really fast idle to 240000 in like 3 seconds super fast the work that bret does with these things is unbeleavable thanks brett anyone out there wanting one get it throught ausjets !!!!! http://www.ausjets.com/ also have to thank christian from ausjets for getting it all organised will post some video once i figure out how to put it on youtube
Posted on: 7/24/2009 8:02 AM by Author "jamiechip"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8959896
FPV/RVOSD BEST SET UP HELP
HI THERE EVERYONE I HAVE BEEN FLYING AROUND A ELECTRIC STYLE TRAINER THAT I ADAPTED A PANASONIC CAMMERA INTO THE BODY OF THE PLANE AND TAKES VIDEO ON AN ANGLE TO THE GROUNG I HAVE BEEN TAKEING VIDEO OF MY FATHERS PROPERTY NOW MY PROBLEM IS THAT I HAVE BEEN FLYING THIS PLANE FROM THE GROUND AND TRYING TO KEEP 100% STABLE AND NO FLY INTO TREES AND SO ON AND THE LONG DISTANCE THAT I AM FLYING FROM MY SELF I THOUGHT THERE MUST BE A NOTHER WAY I THOUGHT FPV THEN I THOUGHT WHAT HAPPENS IF IT GOES OUT OF RANGE THEN I FOUND THIS LITTLE DEVISE AND I THOUGHT MAYBE THIS WOULD BE GOOD LET ME KNOW WHAT YOU THING THIS IS NEW TO ME AND I LIKE THE IDEA OF BEING ABLE TO GO A BIT FURTHER THAN I CAN SEE THE PLANE WOULD BE GOOD THIS IS THE SET UP I WAS GUNA USE ANY ADVISE WOULD BE GREAT ALSO IM UNSURE OF RANGE AND WHAT I CAN DO TO MAKE IT BETTER I SEEN A NOTHER RECEIVER ANTENA AND THOUGHT MAYBE THAT WOULD GIVE THE EXTRA RANGE NEEDED http://www.rangevideo.com/index.php?main_page=product_info&cPath=49&products_id=135 http://www.rangevideo.com/index.php?main_page=product_info&cPath=8&products_id=98
Posted on: 7/21/2009 7:26 PM by Author "jamiechip"
in the forum "Aerial Photography and Video"
http://www.rcuniverse.com/forum/fb.asp?m=8952936
RE: Kyosho Illusion DF
no your not but i still have not found one the standard one does however fly these things fine still havenmt had the courage to throw my swing wing yet but ifm anyone knows of anything or has heard some thing let us know
Posted on: 7/14/2009 8:15 PM by Author "jamiechip"
in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8933743
RE: Fox Composites F86
any update on the f-86
Posted on: 7/8/2009 7:41 AM by Author "jamiechip"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8915645
RE: Good Airframe to suit lambert or jj juniour
what do you sometimes you just make a mistake but this is my desision i dont feel there is good reason to harp on it what will you all do when this turbine is flying around just as redily as the lambert ?
Posted on: 6/24/2009 7:34 PM by Author "jamiechip"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8878214
| 
